Klipsch SWS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch SWS (12 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
IMPORTANT SAFETY
INSTRUCTIONS!
CAUTION: RISK OF ELECTRIC
SHOCK! DO NOT OPEN!
CAUTION! To reduce the risk of electric shock
and fire, do not remove the cover or back plate of
the device enclosure. There are no user ser -v i c e a
ble parts inside. Refer servicing to a Klipsch
authorized service center.
CAUTION! The international symbol of a lightning
bolt inside a triangle is intended to alert the user
to uninsulated "dangerous voltage" within the
device enclosure. The international symbol of an
exclamation point inside a triangle is intended to
a l e rt the user to the presence of important oper-
ating, maintenance and servicing information in
the manual accompanying the device.
WARNING! To reduce the risk of fire or electrical
shock, do not expose this equipment to rain or
m o i s t u re .
1. Read Instructions – All safety and operating
i n s t r uctions should be read before operating the
d e v i c e .
2. Retain Instructions – The safety and operating
i n s t r uctions should be retained for future re f e re n c e .
3. Heed Wa r nings – All warnings on the device
and in the operating instructions should be
a d h e r ed to.
4. Follow Instructions – All operating and safety
i n s t r uctions should be followed.
5. Attachments – Do not use attachments not re c -
ommended by the product manufacturer as they
may cause hazard s .
6. Water and Moisture – Do not use this pro d u c t
near water (for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet base-
ment; or near a swimming pool; and the like).
7. Ventilation – Slots and openings in the cabinet
a r e provided for ventilation and to ensure re l i a b l e
operation of the product and to protect it fro m
o v e r heating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This pro d u c t
should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is
p r ovided or the manufacture r ’s instructions have
been adhered to.
8. Heat – This product should be situated away
f r om heat sources such as radiators, heat re g i s -
ters, stoves, or other products (including ampli-
fiers) that produce heat.
9. Power Sources – This product should be oper-
ated only from the type of power source indicated
on the marking label. If you are not sure of the
type of power supply in your home, consult with
your product dealer or the local power company.
For products intended to operate from battery
p o w e r, or other sources, refer to the operating
i n s t ru c t i o n s .
10. Polarization – This product may be equipped
with a polarized alter rent line plug (an a t i n g - c u r
plug having one blade wider than the other). This
plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug should stilll fail to fit, contact your elec-
trician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
11. Power- C o rd Protection – Power-supply cord s
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cord s
at plugs, convenience receptacles, and the point
w h e r e they exit from the pro d u c t .
12. Overloading – Do not overload wall outlets,
extension cords, or integral convenience re c e p t a -
cles as this can result in a risk of fire or electrical
s h o c k .
13. Lightning and Periods of Non-Use – For
added protection for this product during a light-
ning storm, or when it is left unattended and
unused for long periods of time, unplug it fro m
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
p r oduct due to lightning and powerline surg e s .
14. Cleaning – Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners or
a e r osol cleaners. Use a damp cloth for cleaning.
15. Object and Liquid Entry – Never push objects
of any kind into this product through openings as
they may touch dangerous voltage points or short -
out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the pro d u c t .
16. Damage Requiring Service – Unplug this
p r oduct from the wall outlet and refer servicing to
qualified service personnel under the following
c o n d i t i o n s :
a) When the power-supply cord or plug
is damaged,
b) If liquid has been spilled, or objects
have fallen into the pro d u c t ,
c) If the product has been exposed to
rain or water,
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are
c o v e red by the operating instructions as
an improper adjustment of other controls
may result in damage and often will
re q u i r e extensive work by a qualified
technician to re s t o re the product to its
n o r mal operation,
e) If the product has been dropped or
damaged in any way, and
f) When the product exhibits a distinct
change in perf o r mance – this indicates a
need for serv i c e .
17. Replacement parts – When re p l a c e m e n t
p a r ts are re q u i r ed, be sure the service technician
has used replacement parts specified by the man-
u f a c t u r er or have the same characteristics as the
original parts. Unauthorized substitutions may
result in fire, electric shock, or other hazard s .
18. Safety Check – Upon completion of any serv-
ice or repairs to this product, ask the service tech-
nician to per m safety checks to determine thatf o r
the product is in proper operating condition.
19. Servicing – Do not attempt to service this
p r oduct yourself as opening or removing covers
may expose you to dangerous voltage or other
h a z a r ds. Refer all servicing to qualified serv i c e
p e r s o n n e l .
If this unit is purchased outside of the U.S., please
contact your local dealer or distributor for serv i c e
center information. If purchased inside the U.S.
and dealer service is not available, contact
Klipsch Customer Service for a re t u r n authoriza-
tion (RA) number before shipping. For furt h e r
s e rvice information, contact:
KLIPSCH CUSTOMER SERV I C E
3502 WOODVIEW TRACE, SUITE 200
INDIANAPOLIS, IN 46268-1104
1 - 8 8 8 - 5 5 4 - 5 6 6 5
W W W. K L I P S C H . C O M
SETUP
Multimedia Speaker System
(Figs. 1 & 2)
The SWS subwoofer allows pass
through connection of as many as six
channels from your computer’s sound
card to your multimedia speaker sys-
tem, using standard stereo minijack
connectors. The subwoofer picks up
and reproduces low frequencies from
the signals on all these channels as
they pass through it on the way to the
main speaker system.
On the subwoofer’s back panel are
three input/output minijack pairs: one
green pair for left and right front chan-
nels (FRONT L/R) , a second black
pair for left and right surround chan-
nels (REAR L/R), and a third orange
pair for center channel and subwoofer
(CENTER/SUB). If you have a two-
speaker system, you will use only the
first pair. If you have a three-piece
speaker system, you will use the first
pair, and if you have a 4.1 system,
you will use the second pair as well.
If you have a 5.1-channel speaker
system, you will use all three pairs.
Signal Connections
The Klipsch ProMedia SWS subwoofer
can be used with any ProMedia®or
multimedia speaker system. It can also
be used to supplement the bass output
from a TV set or home audio system
that has appropriate line-level output
jacks, although the signal connections
are different. Connections are also dif-
ferent when the SWS is used with
Klipsch ProMedia speaker systems that
have the SWS-Link subwoofer output
jacks. Each type of signal connection is
described and diagramed separately
later, followed by directions on con-
necting the volume-control module,
attaching multiple SWS subwoofers,
and placement and setup.
FIGURE 2
FIGURE 1
Welcome to the Klipsch ProMedia ®
SWS subwoofer system.
Your SWS subwoofer will add a new
dimension to your enjoyment of your
multimedia sound system. We have
designed the SWS subwoofers to work
with almost any type of speaker sys-
tem, from stereo to 5.1 surround. In
this manual, we will explain the three
basic connection scenarios for your
SWS subwoofer, based on the type of
system you will be using it with, and
how to operate it in each of them.
IMPORTANT NOTE:
Before You Begin!
Do not plug in the SWS’s power cord
until all other wiring is completed.
Make sure that all other parts of the
system, including the computer, are
turned off or disconnected from power
while you are installing the SWS. Be
especially careful not to connect or dis-
connect any signal cables while power
is applied. Failure to observe this cau-
tion may result in loud hums, buzzes,
or pops that will at the very least be
startling and annoying and that in the
extreme may damage your speakers.


Product specificaties

Merk: Klipsch
Categorie: Subwoofer
Model: SWS

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch SWS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Klipsch

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer