Klein Tools 60554 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klein Tools 60554 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
P100 HALF-MASK RESPIRATOR FILTER REPLACEMENT INSTRUCTIONS
INSTRUCCIONES PARA REEMPLAZAR EL FILTRO DEL RESPIRADOR DEMEDIACARA P100
INSTRUCTIONS DE REMPLACEMENT DU FILTRE DU DEMI-MASQUE RESPIRATOIREP100
60554
BASED ON: 1390555 Rev 05/23 A
10.016.0639.00.AA
FIG. 3 FIG. 5
FIG. 4 FIG. 6
FIG. 1
FIG. 2
FIG. 7
STORAGE
of 14°F (-10°C) to 10F (40° C). Spare filters should also be stored in a cool dry atmosphere, out of direct sunlight at a
between temperatures of 14°F (-10°C) to 10F (4C). Storage under conditions other than those specified may affec
shelf life.
FILTER INSPECTION & REPLACEMENT
DO NOT WASH FILTERS.
as required.
Each filter pack is individually marked with the month and year of shelf life expiration. Shelf life is 5 years for P10
filters. Filters must be discarded when they reach their expiration date printed on the exterior of the packaging
NOTE: Filters must be selected by a competent person familiar with workplace hazards and their concentration.
Particulate filters must be changed when breathing resistance increases as the filter becomes clogged or as th
application requires
Read instructions before using
104°F
(40°C)
14°F
(-1C)
0 – 95%
R.H.
Temperature range of storage conditions
Year/Month
Expiration date
<95%
R.H.
Humidity range of storage conditions
S – SPECIAL OR CRITICAL USER INSTRUCTIONS
These P100 Half-Mask Respirator(s), sizes S/M (P/N: 60553) or M/L (P/N:60552) used with filter (P/N: 60554), have
been manufactured by Air Filtration Solutions for Klein Tools under TC-84A-9447
WARRANTY
www.kleintools.com/warranty
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
ENGLISH
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SPECIFICATIONS
PARTICULATE FILTERS 60554 FOR P100 HALF MASK RESPIRATORS 60552 AND 60553
Filter Type: P100 <0.03% penetration
Color Code: Magenta Text
These filters are designed to fit the P100 Half Mask Respirator only, which is approved as a half-mask respirator in
accordance with NIOSH 42 CFR 84. The P100 filter is part of the approved assembly and only when the above items are
used together is the device approved for occupational applications
APPLICATIONS
The P100 half-mask respirator together with P100 filters give protection against all particulate aerosols; including solid
and liquid particules such as dust, metal fumes, and oil mist. The protection provided by classification P100 also cover
the protection provided by lower class filters. Guidelines for the selection and use may vary between countries, alway
check prior to use to ensure that your selection for the intended application meets national requirements
WARNINGS
To ensure safe operations, follow these instructions. Failure to observe these warnings instructions may result in
sickness or death.
NOT FOR USE
in atmospheres containing less than 19.5% oxygen
NOT FOR USE
in atmospheres immediately dangerous to life or health
DO NOT
exceed maximum use concentrations established by regulatory standards. Failure to properly use and
maintain this product could result in injury or death
Follow the manufacturers Users Instructions for changing cartridges, canisters and/or filters
All approved respirators shall be selected, fitted, used and maintained in accordance with MHSA, OSHA and othe
applicable regulations
NEVER
substitute, modify, add or omit parts. Use only exact replacement parts in the configuration as specified by the
manufacturer.
Refer to users instructions and/or maintenance manuals for information on use and maintenance of these respirators
NIOSH does not evaluate respirators for use as surgical masks.
ALWAYS
conduct a pressure face fit check prior to each use. If the check fails the respirator may be faulty or require
replacement depending on age, frequency of use and replacement of filters
The use of this respirator presupposes exact knowledge of the instructions for use, applicable health and safety
standards, guidelines for selection and use, and appropriate training in matters of personal respiratory protection
Leave the contaminated area immediately if
Dizziness or distress is experienced
You taste or smell contaminants or irritation occurs
Breathing becomes difficult
A defect is discovered in the respirator
Store respirator as per instructions
Before occupational use of this respirator a written respiratory protection program must be implemented meeting al
the local government requirements. In the United States employers must comply with OSHA 29 CFR 1910.134 which
includes medical evaluation, training, and fit testing
FITTING
Always check expiration date is not exceeded before unpacking replacement filter
1.
Rotate the 1/4-Turn Latches on the Respirator Body counterclockwise (FIG. 1).
2.
Remove Grille from Respirator Body by pulling out Sample Port Plug to expose the filters (FIG. 2).
3.
Flex Respirator Body to remove both used filters (FIG. 3).
4.
Slide a new filter into position with all the text facing outwards and right-side up (FIG. 4)
5.
Carefully fit the rest of the filter into the Respirator Body using the channel on the filter and aligning the notches o
the side. To ensure that a good seal is made, the filter should be fully seated into the channel on the outside of th
Respirator Body (FIG. 4).
6.
Repeat Steps 4 & 5 for the other filter. Always replace both filters at the same time and keep a record of the expiration
date.
7.
Place Grille into position by pushing the Exhalation Valve surrounds over the Exhalation Valve on the Respiratory Body
Rotate the1/4-Turn Latches clockwise to secure (FIG. 6).
8.
nsert Sample Port Plug and ensure it is fully seated before use (FIG. 7)
ESPECIFICACIONES GENERALES
FILTROS PARA PARCULAS 60554 PARA LOS RESPIRADORES DE MEDIA CARA P100 60552 Y 60553
Tipo de filtro: P100 <0,03% de penetración
Codificación por color: texto en magenta
Estos filtros están diseñados para colocarse únicamente en el respirador de media cara P100, que está aprobad
como respirador de media cara de conformidad con las normas NIOSH42 CFR84. El filtro P100 es parte del conjunto
aprobado y únicamente cuando los artículos anteriores se usan juntos se aprobará el dispositivo para aplicaciones d
trabajo.
APLICACIONES
El respirador de media cara P100, junto con los filtros P100, brinda protección contra todas las partículas de aerosol
incluidas partículas sólidas y líquidas como polvo, humos metálicos y vapor de aceite. La protección que ofrece l
clasificación P100 también abarca la protección brindada por filtros de clase inferior. Las pautas para la selección y uso
pueden variar entre países; revíselas siempre antes de cada uso para asegurarse de que su selección para laaplicación
deseada cumple con los requisitos nacionales
ADVERTENCIAS
Para garantizar un funcionamiento seguro, siga estas instrucciones. No seguir estas advertencias e instrucciones
puede causar enfermedades o incluso la muerte.
NO ES APTO PARA UTILIZARLO
en atmósferas con menos del 19,5% de oxígeno
NO ES APTO PARA UTILIZARLO
en atmósferas que representen un peligro inmediato para la vida o la salud
NO
exceda las concentraciones máximas de uso establecidas por las normas reguladoras. Si no se utiliza n
selerealiza mantenimiento correctamente a este producto, podría causar lesiones o incluso la muerte
Siga las instrucciones de los fabricantes al momento de cambiar cartuchos, botes y/o filtros
Todos los respiradores aprobados se deben seleccionar, adaptar, utilizar y mantener de acuerdo con las normas
deMSHA, OSHA y otras normas aplicables
NUNCA
sustituya, modifique, agregue o retire piezas. Utilice únicamente las piezas de repuesto exactas en l
configuración como lo especifica el fabricante
Consulte las instrucciones para el usuario y/o los manuales de mantenimiento si necesita información sobre eluso
mantenimiento de estos respiradores
NIOSH no evalúa respiradores para utilizarlos como máscaras quirúrgicas
SIEMPRE
realice una prueba de ajuste de presión en el rostro antes de cada uso. Si no pasa la prueba, puede que e
respirador tenga fallas o necesite reemplazarlo, dependiendo de la antigüedad, frecuencia de uso y reemplazo de lo
filtros.
El uso de este respirador presupone que se cuenta con el conocimiento adecuado de las instrucciones de uso, la
normas de salud y seguridad aplicables, las pautas para la selección y uso, y una capacitacn adecuada en protección
respiratoria personal
Abandone inmediatamente el área contaminada si
siente mareo o angustia
percibe contaminantes mediante el gusto o el olfato, o presenta irritación
empieza a respirar con dificultad; y
descubre un defecto en el respirador
Almacene el respirador de acuerdo a las instrucciones
Antes de usar este respirador en el trabajo, se debe implementar un programa de protección respiratoria por escrito qu
cumpla con todos los requisitos del gobierno local. En EstadosUnidos, los empleadores deben cumplir con la norm
OSHA 29 CFR 1910.134 que incluye evaluación médica, capacitación y prueba de ajuste
ALMACENAMIENTO
El respirador se debe alejado de la luz solar directa, en un ambiente seco no contaminado, a una temperatura de entr
14°F (-10°C) y 104°F (40°C). Las piezas de repuesto también se deben almacenar en un ambiente seco y fresco
alejadas de la luz solar directa y a una temperatura de entre 14°F (-10°C) y 104°F (40°C). El almacenamiento en
condiciones diferentes a las especificadas podría afectar la vida útil de almacenamiento
INSPECCIÓN Y REEMPLAZO DEL FILTRO
NO LAVE LOS FILTROS.
Inspeccione el respirador y el filtro antes y después de usarlos, a fin de detectar daños como roturas o grietas
yreemplácelos o deséchelos inmediatamente, según corresponda
Cada paquete de filtros está marcado individualmente con el mes y el año de caducidad de la vida útil de almacenamiento. L
vida útil de almacenamiento de los filtros P100 es de 5años. Los filtros se deben desechar cuando lleguen a su fecha d
caducidad, que se encuentra impresa en el exterior del empaque
NOTA: los  ltros los debe seleccionar una persona competente que esté familiarizada con los peligros en el lugarde
trabajo y su concentración.
Los filtros para partículas se deben cambiar cuando aumente la resistencia a la respiración a medida que el filtr
seobstruye o según la aplicación lo requiera
Lea las instrucciones antesde
usarlo
104°F
(40°C)
14°F
(-10°C)
0–95%
H.R.
Rango de temperatura en condiciones de
almacenamiento
Año/mes
Fecha de caducidad
<95%
H.R.
Rango de humedad en condiciones
dealmacenamiento
S – INSTRUCCIONES ESPECIALES O CRÍTICAS PARA EL USUARIO
Estos respiradores de media cara P100, tamaño S/M (P/N: 60553) o M/L (P/N:60552), se usan con filtros (P/N:60554) y
son fabricados por Air Filtration Solutions para Klein Tools conforme a TC-84A-9447
GARANTÍA
www.kleintools.com/warranty
SERVICIO AL CLIENTE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
CONSERVE ESTAS INSTRUCCIONES PARA CONSULTARLAS EN EL FUTURO
ESPAÑOL


Product specificaties

Merk: Klein Tools
Categorie: Niet gecategoriseerd
Model: 60554

Heb je hulp nodig?

Als je hulp nodig hebt met Klein Tools 60554 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Klein Tools

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd