KitchenAid W10395148 Handleiding

Bekijk gratis de handleiding van KitchenAid W10395148 (3 pagina’s), behorend tot de categorie Koelkast. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over KitchenAid W10395148 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

REVERSIBILITY KIT INSTRUCTIONS

Parts Included:

Brand badge removal tool

Brand badge template

Hole cover decal (color coordinated to exterior)

Tools Needed:

Scissors

Masking tape

Freezer Door

1.Using the removal tool (provided), remove the brand badge

from the freezer door by lifting up the right-hand side and

peeling the badge away from the door from right to left.

NOTE: To avoid scratching the door, do not use a sharp or

metallic object to pry the brand badge from the door.

2.Rub a small amount of liquid dish soap over any adhesive

residue with your fingers. Rinse the door with warm water and

dry with a soft cloth.

3.Cut the template along the dotted lines that match the shape

of the brand badge.

4.Align the edges of the template with the side and top of the

freezer door and tape the template to the door.

NOTE: When the template is correctly aligned, the hole in the

door, where the handle was, will be within the cutout of the

template, as shown.

5.Using the cutout as a guide, press the brand badge onto the

freezer door making sure that the hole is completely covered.

6.Slowly remove the template.

Refrigerator Door

1.Remove the decal covering the hole on the opposite side of

the door, where the refrigerator door handle will be installed,

and discard the decal.

2.Rub a small amount of liquid dish soap over any adhesive

residue with your fingers. Rinse the door with warm water and

dry with a soft cloth.

3.After installing the door handle on the opposite side, cover the

remaining hole with the decal that matches the color of the

refrigerator exterior.

W10394433A

Product specificaties