Kimo MP 112 Handleiding

Bekijk gratis de handleiding van Kimo MP 112 (4 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over Kimo MP 112 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

2

3

4

5

Manometer

USER MANUAL

Description of the device

1. OK key

2. Backlight key

3. Select key

4. On/Off/Esc key

5. Hold/min/max key

MP 110 – MP111

MP112 – MP 115

Technical specications

General features

Measuring elementPiezoresistive sensor

Tolerated overpressureMP 110: 250 mbar / MP 111: 700 mbar / MP 115: 1.4 bar / MP 112: 3 bar

Connector

MP 110 / 111: Ø 6.2 mm barbed connectors made of nickelled brass / MP 115 / 112: Ø 4.6 mm barbed connectors made of

nickelled brass

Display

4 lines, LCD technology. Dimensions 50 x 36 mm.

2 lines of 5 digits with 7 segments (value)

2 lines of 5 digits with 16 segments (unit)

HousingABS, protection IP54

Keypad5 keys

European directives2014/30/EU EMC; 2014/35/EU Low Voltage; 2011/65/EU RoHS II; 2012/19/EU WEEE

Power supply4 batteries AAA LR03 1.5 V

Battery life180 hours

AmbienceNeutral gas

Conditions of use (°C, %RH, m)From 0 to +50 °C. In non condensing conditions. From 0 to 2000 m.

Storage temperatureFrom -20 to +80 °C

Auto shut-offAdjustable from 0 to 120 min

Weight220 g

ParameterModelsMeasuring unitsAccuracy*Measuring rangeResolution

Pressure

MP 110Pa, mmH

2

O, inWg, daPa±0.5% of reading ±2 PaFrom -1000 to +1000 Pa1 Pa

MP 111

kPa, mmH

2

O, inWg, mbar,

mmHg, daPa

±0.5% of reading ±2 mmH

2

OFrom -1000 to +1000 mmH

2

O

From 0 to ±200OmmH

2

O:

0.1 mmH

2

O

Beyond: 1 mmH

2

O

MP 115

kPa, inWg, mbar, mmHg,

PSI

±0.5% of reading ±0.5 mbarFrom -500 to +500 mbar0.1 mbar

MP 112

kPa, inWg, mbar, mmHg,

PSI, bar

±0.5% of reading ±2 mbarFrom -2000 to +2000 mbar1 mbar

*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.

Product specificaties