Kenwood NX-3820 Handleiding
Kenwood
Radio communicatie
NX-3820
Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood NX-3820 (2 pagina's) in de categorie Radio communicatie. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Model Frequency range Max. output power
NX-5700-E
TX/RX 136.000 - 174.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-5800-E
TX/RX 400.000 - 470.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-3720-E TX/RX 136.000 - 174.000 MHz 25 W
NX-3720G-E
TX/RX 136.000 - 174.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
NX-3820-E TX/RX 400.000 - 470.000 MHz 25 W
NX-3820G-E
TX/RX 400.000 - 470.000 MHz 25 W
GPS 1575.42 ± 1 MHz –
Bluetooth 2402 - 2480 MHz Class2 / 2.5 mW
TK-D740-E TX/RX 136.000 - 174.000 MHz 25 W
TK-D840-E TX/RX 400.000 - 470.000 MHz 25 W
DIGITAL TRANSCEIVER
USER GUIDE
This User guide covers only the basic operations of
your radio. For using details instruction manual, refer
to the following URL or QR code.
https://manual.kenwood.com/files/B5K-0647-00.pdf
SUPPLIED ACCESSORIES
Carefully unpack the transceiver. We recommend that you identify the items listed
in the following list before discarding the packing material. If any items are missing
or have been damaged during shipment, fi le a claim with the carrier immediately.
Item NX-5000 series NX-3000 series
TK-D740
TK-D840
DC power cable with fuses (15 A) 1 1
Mounting bracket 1 1
Microphone 1 –
Microphone hanger 1 –
4 x 16 mm self-tapping screw 3 –
Screw set
5 x 16 mm self-tapping screw 4 4
M4 x 6 mm hex-headed screw with washer 4 4
Spring washer 4 4
Flat washer 4 4
User guide 1 1
BASIC OPERATION
Display
Illumination sensor
Status indicator Speaker
SpeakerStatus indicator
NX-3000 series
NX-5000 series
Display
TK-D740/ TK-D840
Display
TX/RX indicator
Status indicator
Operation buttons
Operation buttons
Operation buttons
Microphone
PTT switch
Speaker
SWITCHING POWER ON/OFF
Press to switch the transceiver ON.[ ]
Press [ ] again to switch the transceiver OFF.
ADJUSTING THE VOLUME
Press the button programmed as [Volume Up] to increase the volume.
Press the button programmed as [Volume Down] to decrease the volume.
SELECTING A ZONE AND CHANNEL
Select the desired zone and channel using the buttons programmed as / [Zone Up]
[Zone Down] [Channel Up] [Channel Down] and / .
TRANSMITTING
1 Select the desired zone and channel.
2 Press the PTT switch and speak into the microphone. Release the switch PTT
to receive.
• For best sound quality, hold the microphone approximately 3 ~ 4 cm (1.5
inches) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE
GUIDE DE L’UTILISATEUR
Cette Guide de l’utilisateur couvre uniquement les
opérations de base de votre radio. Pour utiliser ce
manuel d’instruction (User Manual) en détail, reportez-
vous à l’URL suivante ou code QR.
https://manual.kenwood.com/files/B5K-0647-00.pdf
ACCESSOIRES FOURNIS
Déballez soigneusement l’émetteur-récepteur. Prenez soin de vérifi er la présence
des articles ci-dessous avant de vous débarrasser du matériel d’emballage.
S’il manque un des éléments ou si un élément est endommagé, remplissez
immédiatement un formulaire de plainte avec le livreur.
Article Série NX-5000
Série NX-3000
TK-D740
TK-D840
Câble d’alimentation CC avec fusibles (15 A) 1 1
Support de montage 1 1
Microphone 1 –
Crochet à microphone 1 –
Vis taraudeuse 4 x 16 mm 3 –
Ensemble de vis
Vis taraudeuse 5 x 16 mm 4 4
Vis à tête hexagonale et rondelle M4 x 6 mm 4 4
Rondelle à ressort. 4 4
Rondelle ordinaire 4 4
Guide de l’utilisateur 1 1
FONCTIONNEMENT DE BASE
Affichage
Capteur d’éclairage
Indicateur d’état Haut-parleur
Haut-parleurIndicateur d’état
Série NX-3000
Série NX-5000
Affichage
TK-D740/ TK-D840
Affichage
Indicateur TX/RX
Indicateur d’état
Boutons de fonctionnement
Boutons de fonctionnement
Boutons de fonctionnement
Microphone
Commutateur PTT
Haut-parleur
MISE SOUS/ HORS TENSION
Appuyez pour mettre l’émetteur-récepteur sous tension.[ ]
Appuyez à nouveau sur [ ] pour mettre l’émetteur-récepteur hors tension.
RÉGLAGE DU VOLUME
Appuyez sur la touche programmée en tant que [Volume haut] pour augmenter le
volume.
Appuyez sur la touche programmée en tant que [Volume bas] pour diminuer le
volume.
SÉLECTION D’UNE ZONE ET D’UN CANAL
Sélectionnez la zone et le canal souhaités à l’aide des boutons programmés en
tant que / [Zone haut] [Zone bas] [Canal haut] [Canal bas] et / .
TRANSMISSION
1 Sélectionnez la zone et le canal voulus.
2 PTT Appuyez sur le commutateur et parlez dans le microphone. Relâchez le
commutateur pour recevoirPTT
• Pour une meilleure qualité du son, tenez le microphone à environ 3 ~ 4 cm
de votre bouche.
RÉCEPTION
Sélectionnez la zone et le canal voulus. Si la signalisation a été programmé
sur le canal sélectionné, vous entendrez un appel uniquement si le signal reçu
correspond aux réglages de votre émetteur-récepteur.
B5A-2830-10 (E)
USER GUIDE
GUIDE DE L'UTILISATEUR
GUÍA DEL USUARIO
GUIDA PER L'UTENTE
BENUTZERHANDBUCH
GEBRUIKERSHANDLEIDING
KULLANICI REHBERI
ΟΔΗΓΟΣ ΧΡΗΣΤΗ
LGUIA DO UTILIZADOR
NX-5000 series
NX-3000 series
TK-D740 TK-D840
TRANSCEPTOR DIGITAL
GUÍA DEL USUARIO
Este Guía del Usuario sólo cubre las operaciones
básicas de su radio. Para ver el manual de
instrucciones de detalles de uso , consulte el siguiente
URL código QR.
https://manual.kenwood.com/files/B5K-0647-00.pdf
ACCESORIOS SUMINISTRADOS
Desembale el transceptor con cuidado. Le recomendamos que logre identifi car
los elementos que se indican a continuación antes de deshacerse del material de
embalaje. Si falta o p1-ha resultado dañado algún artículo durante el envío, presente
inmediatamente una reclamación a la empresa de transporte.
Artículo Serie NX-5000
Serie NX-3000
TK-D740
TK-D840
Cable de alimentación CC con fusibles (15 A) 1 1
Soporte de montaje 1 1
Micrófono 1 –
Horquilla del micrófono 1 –
Tornillo autorroscante de 4 x 16 mm 3 –
Juego de tornillos
Tornillo autorroscante de 5 x 16 mm 4 4
Tornillos de cabeza hexagonal con arandela de M4
x 6 mm 4 4
Arandela de resorte 4 4
Arandela plana 4 4
Guía del usuario 1 1
OPERACIONES BÁSICAS
Pantalla
Sensor de iluminación
Indicador de estado Altavoz
AltavozIndicador de estado
Serie NX-3000
Serie NX-5000
Pantalla
TK-D740/ TK-D840
Pantalla
Indicador TX/RX
Indicador de estado
Botones de operación
Botones de operación
Botones de operación
Micrófono
Conmutador de PTT
Altavoz
ENCENDIDO Y APAGADO
Pulse para activar el transceptor.[ ]
Vuelva a pulsar [ ] para apagar el transceptor.
AJUSTE DEL VOLUMEN
Pulse el botón programado como [Subir volumen] para aumentar el volumen.
Pulse el botón programado como [Bajar volumen] para reducir el volumen.
SELECCIÓN DE UNA ZONA Y CANAL
Seleccione la zona y el canal deseados utilizando los botones programados como
[Zona arriba] [Zona abajo] [Subir canal] [Bajar canal]/ y / .
TRANSMISIÓN
1 Seleccione la zona deseada mediante.
2 PTT Presione el conmutador y hable al micrófono. Suelte el conmutador PTT
para recibir.
• Para obtener una calidad de sonido optima, sujete el micrófono a 3 ó 4 cm
de la boca.
RECEPCIÓN
Seleccione la zona y el canal deseados. Si se p1-ha programado la función de
señalización en el canal seleccionado, sólo oirá las llamadas en las que la señal
recibida coincida con la confi guración del transceptor.
RICETRASMETTITORE DIGITALE
GUIDA PER L’UTENTE
Questa guida per l’utente spiega soltanto i fondamenti
d’uso del ricetrasmettitore. Il manuale d’istruzioni
dettagliato è scaricabile dall’indirizzo o codice QR.
https://manual.kenwood.com/files/B5K-0647-00.pdf
ACCESORI FORNITI
Disimballare con cura il ricetrasmettitore. Prima di eliminare il materiale
d’imballaggio, si consiglia di verifi care la presenza degli articoli contenuti
nell’elenco seguente. In caso di parti mancanti o danneggiate, inoltrare
immediatamente reclamo al corriere.
Articolo Serie NX-5000 Serie NX-3000
TK-D740
TK-D840
Cavo di alimentazione c.c. con fusibili (15 A) 1 1
Staff a di montaggio 1 1
Microfono 1 –
Gancio microfono 1 –
Vite autofi lettante 4 x 16 mm 3 –
Set di viti
Vite autofi lettante 5 x 16 mm 4 4
Vite esagonale con rondella M4 x 6 mm 4 4
Rondella a molla 4 4
Rondella piatta 4 4
Guida per l’utente 1 1
FUNZIONAMENTO DI BASE
Display
Sensore d’illuminazione
Indicatore di stato Altoparlante
AltoparlanteIndicatore di stato
Serie NX-3000
Serie NX-5000
Display
TK-D740/ TK-D840
Display
Indicatore TX/RX
Indicatore di stato
Pulsanti di funzionamento
Pulsanti di funzionamento
Pulsanti di funzionamento
Microfono
Interruttore PTT
Altoparlante
ACCENSIONE E SPEGNIMENTO
Premere per accendere il ricetrasmettitore.[ ]
Premere [ ] di nuovo per spegnere il ricetrasmettitore.
REGOLAZIONE DEL VOLUME
Premere il pulsante programmato come [Volume su] per aumentare il volume.
Premere il pulsante programmato come [Volume giù] per diminuire il volume.
SELEZIONE DI UNA ZONA E DI UN DI CANALE
Selezionare la zona e il canale desiderati utilizzando i pulsanti programmati come
[Zone su] [Zone giù] [Canale su] [Canale giù]/ e / .
TRASMISSIONE
1 Selezionare la zona e il canale desiderati.
2 Premere l’interruttore PTT e parlare nel microfono. Rilasciare l’interruttore PTT
per la ricezione.
• Per ottenere una migliore qualità del suono, tenere il microfono a circa 3 ~ 4
cm dalla bocca.
RICEZIONE
Selezionare la zona e il canale desiderati. Se sul canale selezionato è stata
programmato uno specifi co tipo di segnalazione, la ricezione da parte di un altro
corrispondente potrà avvenire solo se le segnalazioni risulteranno compatibili ed
idonee al formato utilizzato in fase di programmazione.
INFORMATION ON SOFTWARE LICENSE (NX-5000 SERIES/ NX-3000 SERIES)
This transceiver uses a software according to the following license agreements.
*zlib LICENSE
Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied
warranty.
In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented;
you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in
the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such,
and must not be misrepresented as being the original
software.
3. This notice may not be removed or altered from any source
distribution.
Jean-loup Gailly (jloup@gzip.org)
Mark Adler (madler@alumni.caltech.edu)
*libpng LICENSE
This copy of the libpng notices is provided for your
convenience. In case of any discrepancy between this copy
and the notices in the fi le png.h that is included in the libpng
distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices
immediately following this sentence.
This code is released under the libpng license. libpng versions
1.2.6, August 15, 2004, through 1.6.8, December 19, 2013, are
Copyright (c) 2004, 2006-2013 Glenn Randers-Pehrson, and
are distributed according to the same disclaimer and license
as libpng-1.2.5 with the following individual added to the list of
Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3,
2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson,
and are distributed according to the same disclaimer and
license as libpng-1.0.6 with the following individuals added to
the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment
of the library or against infringement. There is no warranty
that our eff orts or the library will fulfi ll any of your particular
purposes or needs. This library is provided with all faults, and
the entire risk of satisfactory quality, performance, accuracy,
and eff ort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20,
2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson,
and are distributed according to the same disclaimer and license
as libpng-0.96, with the following individuals added to the list of
Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are
Copyright (c) 1996, 1997 Andreas Dilger Distributed according
to the same disclaimer and license as libpng-0.88, with the
following individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996,
are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing
Authors” is defi ned as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The
Contributing Authors and Group 42, Inc. disclaim all warranties,
expressed or implied, including, without limitation, the
warranties of merchantability and of fi tness for any purpose.
The Contributing Authors and Group 42, Inc. assume no
liability for direct, indirect, incidental, special, exemplary, or
consequential damages, which may result from the use of the
PNG Reference Library, even if advised of the possibility of
such damage.
Permission is hereby granted to use, copy, modify, and
distribute this source code, or portions hereof, for any purpose,
without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must
not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from
any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifi cally
permit, without fee, and encourage the use of this source
code as a component to supporting the PNG fi le format in
commercial products. If you use this source code in a product,
acknowledgment is not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use
in “about” boxes and the like:
printf(“%s”,png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in
the fi les
“pngbar.png” and “pngbar.jpg” (88x31) and “pngnow.png”
(98x31).
Libpng is OSI Certifi ed Open Source Software. OSI Certifi ed
Open Source is a certifi cation mark of the Open Source
Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 19, 2013
*Md5
Copyright (C) 1999, 2000, 2002 Aladdin Enterprises. All rights
reserved.
This software is provided ‘as-is’, without any express or implied
warranty.
In no event will the authors be held liable for any damages arising
from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented;
you must not claim that you wrote the original software. If
you use this software in a product, an acknowledgment in
the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such,
and must not be misrepresented as being the original
software.
3. This notice may not be removed or altered from any source
distribution.
L. Peter Deutsch
ghost@aladdin.com
© 2019
DIGITAL FUNKGERÄT
BENUTZERHANDBUCH
In dieser Benutzerhandbuch sind die Grundfunktionen
Ihres Mobilfunkgeräts beschrieben. Eine detaillierte
Bedienungsanleitung fi nden Sie bei der folgenden URL
oder QR-Code.
https://manual.kenwood.com/files/B5K-0647-00.pdf
MITGELIEFERTES ZUBEHÖR
Packen Sie den Transceiver vorsichtig aus. Wir empfehlen, dass Sie die
Lieferung anhand der folgenden Liste auf Vollständigkeit prüfen, bevor Sie das
Verpackungsmaterial entsorgen. Falls Teile fehlen oder Transportschäden festgestellt
werden, reklamieren Sie diesen Umstand bitte umgehend beim Spediteur.
Gegenstand NX-5000-Serie NX-3000-Serie
TK-D740
TK-D840
Gleichstromversorgungskabel mit Sicherungen (15 A) 1 1
Einbauhalterung 1 1
Mikrofon 1 –
Mikrofonaufhängung 1 –
4 x 16 mm-Schneidschraube 3 –
Schraubensatz:
5 x 16 mm-Schneidschraube 4 4
M4 x 6 mm-Sechskantschraube mit Unterlegscheibe 4 4
Federscheibe 4 4
Unterlegscheibe 4 4
Benutzerhandbuch 1 1
GRUNDLEGENDE BEDIENUNG
Anzeige
Beleuchtungssensor
Status-Anzeige Lautsprecher
LautsprecherStatus-Anzeige
NX-3000-Serie
NX-5000-Serie
Anzeige
TK-D740/ TK-D840
Anzeige
TX/RX-Anzeige
Status-Anzeige
Bedientasten
Bedientasten
Bedientasten
Mikrofon
PTT-Schalter
Lautsprecher
EIN /AUSSCHALTEN-
Drücken Sie , um den Transceiver einzuschalten.[ ]
Drücken Sie [ ] erneut, um den Transceiver auszuschalten.
EINSTELLEN DER LAUTSTÄRKE
Drücken Sie die als [Lautstärke lauter] programmierte Taste, um die Lautstärke zu
steigern.
Drücken Sie die als [Lautstärke leiser] programmierte Taste, um die Lautstärke zu
verringern.
ZONE UND KANAL AUSWÄHLEN
Wählen Sie die gewünschte Zone und den Kanal mit den als / [Zone aufwärts] [Zone
abwärts] [Kanal aufwärts] [Kanal abwärts] und / programmierten Tasten.
SENDEN
1 Wählen Sie die gewünschte Zone und den gewünschten Kanal aus.
2 PTT- Drücken Sie die Taste, und sprechen Sie in das Mikrofon. Lassen Sie die -PTT
Taste los, um zu empfangen.
• Für beste Tonqualität halten Sie das Mikrofon in etwa 3 – 4 cm Abstand zum
Mund.
EMPFANGEN
Wählen Sie die gewünschte Zone und den gewünschten Kanal aus. Wenn für den
gewählten Kanal Signalisierung programmiert ist, hören Sie einen Ruf nur, wenn das
empfangene Signal auf Ihre Transceiver- Einstellungen passt.
DIGITALE ZENDONTVANGER
GEBRUIKERSHANDLEIDING
Deze Gebruikershandleiding beschrijft alleen de
basisbediening van uw radio. Zie de volgende website of
QR-code voor een gedetailleerde Gebruiksaanwijzing.
https://manual.kenwood.com/files/B5K-0647-00.pdf
BIJGELEVERDE ACCESSOIRES
Pak de zendontvanger voorzichtig uit. Wij adviseren u de onderdelen die in
onderstaande lijst vermeld staan te identifi ceren voordat u het verpakkingsmateriaal
weggooit. Als onderdelen ontbreken of tijdens het vervoer beschadigd zijn, moet u
onmiddellijk een schadeclaim indienen bij de vervoerder.
Item NX-5000-serie NX-3000-serie
TK-D740
TK-D840
Gelijkstroomkabel met zekeringen (15 A) 1 1
Montagebeugel 1 1
Microfoon 1 –
Microfoonhaak 1 –
Plaatschroef 4 x 16 mm 3 –
Schroevenset
Plaatschroef 5 x 16 mm 4 4
Zeskantschroef met sluitring M4 x 6 mm 4 4
Veerring 4 4
Platte ring 4 4
Gebruikershandleiding 1 1
BASISBEDIENING
Display
Verlichtingssensor
Status-indicator Luidspreker
LuidsprekerStatus-indicator
NX-3000-serie
NX-5000-serie
Display
TK-D740/ TK-D840
Display
TX/RX-indicator
Status-indicator
Bedieningsknoppen
Bedieningsknoppen
Bedieningsknoppen
Microfoon
PTT schakelaar
Luidspreker
AAN/UITSCHAKELEN
Druk op om de zendontvanger in te schakelen.[ ]
Druk nogmaals op [ ] om de zendontvanger uit te schakelen.
VOLUME INSTELLEN
Druk op de knop geprogrammeerd als [Volume omhoog] om het volume te verhogen.
Druk op de knop geprogrammeerd als [Volume omlaag] om het volume te verlagen.
ZONE EN KANAAL SELECTEREN
Selecteer de gewenste zone en het gewenste kanaal met behulp van de knoppen
geprogrammeerd als [Zone omhoog] [Zone omlaag] [Kanaal omhoog] [Kanaal / en /
omlaag].
ZENDEN
1 Selecteer de gewenste zone en het gewenste kanaal.
2 PTT Druk op de -schakelaar en spreek in de microfoon. Laat de -schakelaar los PTT
voor ontvangst.
• Voor de beste geluidskwaliteit houdt u de microfoon ongeveer 3 ~ 4 cm van uw
mond.
ONTVANGEN
Selecteer de gewenste zone en het gewenste kanaal. Als signalering is
geprogrammeerd op het kanaal, hoort u alleen een oproep als het ontvangen signaal
overeenkomt met de instellingen van uw zendontvanger.
SAYISAL TELSİ İZ
KULLANICI REHBERI
Bu Kullan c Rehberi yaln zca telsizinizin temel ı ı ı
fonksiyonlar n anlatmaktad r. Kullan mla ilgili ayr nt lar ve ı ı ı ı ı ı
Kullan c El Kitab için a a daki URL adresine ba vurun ı ı ı ş ğış
veya QR kodu.
https://manual.kenwood.com/files/B5K-0647-00.pdf
SAĞLANAN AKSESUARLAR
Telsizi ambalaj ndan dikkatle ç n. Ambalaj malzemelerini atmadan önce a a daki ı ıkarış ğı
listede verilmi olan parçalar tan mlaman z öneririz. Herhangi bir parçan n eksik p2-ya da şı ı ı ı ı
nakliye s nda hasar görmü olmas halinde, derhal nakliyeci ırasışı fi rmaya resmi itirazda
bulunun.
Makale NX-5000 serisi NX-3000 serisi
TK-D740
TK-D840
DC güç kablosu sigortalar ile birlikte (15 A) 1 1
Montaj Kızağı1 1
Mikrofon 1 –
Mikrofon ask sı ı 1 –
4 x 16 mm kendi delebilen vida 3 –
Vida seti
5 x 16 mm kendi delebilen vida 4 4
M4 x 6 mm rondelal imbus vida 4 4ı
Yaylı rondela 4 4
Düz rondela 4 4
Kullan c Rehberi 1 1ı ı
TEMEL LEMLERİŞ
Ekran
Aydınlatma sensörü
Durum Göstergesi Seçici
SeçiciDurum Göstergesi
NX-3000 serisi
NX-5000 serisi
Ekran
TK-D740/ TK-D840
Ekran
TX/RX Göstergesi
Durum Göstergesi
Operasyon dü meleriğ
Operasyon dü meleriğ
Operasyon dü meleriğ
Mikrofon
PTT tu uş
Seçici
AÇMA/KAPATMA GÜÇ DÜ MESIĞ
Telsizi AÇMAK için dü mesine bas n.[ ] ğı
Telsizi KAPATMAK için [ ] dü mesine tekrar bas n.ğı
SES SEV YES N AYARLAMAİ İ İ
Ses düzeyini art rmak için olarak programlanm dü meye bas n. ı[Ses Artt rma] ıış ğ ı
Ses düzeyini azaltmak için olarak programlanm dü meye bas n.[Ses Azaltma] ış ğ ı
BÖLGE VE KANAL SEÇME
[Bölge Artt rma] [Bölge Azaltma]ı/ ve [Kanal Yukarı ı] [Kanal A a/ ş ğ ] olarak
programlanm dü meleri kullanarak istenilen bölgeyi ve kanal seçin.ış ğ ı
İLETIM
1 stenen bölge ve kanal seçin.İı
2 PTT dü mesine bas n ve mikrofona konu un. Al m için dü mesini b n.ğışıPTT ğırakı
• En iyi ses kalitesi için, mikrofonu a z n zdan yakla k 3 ila 4 cm uzakta tutun.ğı ı şı
ALICI
İstenen bölge ve kanal seçin. Sinyal seçili kanala programland nda, aramay yaln zca ı ı ığı ı
al nan sinyal, telsiz ayarlar n zla e le ti inde duyacaks n z.ı ı ı ş ş ğ ı ı
ΨΗΦΙΑΚΟΣ ΠΟΜΠΟΔΕΚΤΗΣ
ΟΔΗΓΟΣ ΧΡΗΣΤΗ
Αυτός ο Οδηγός Χρήστη καλύπτει μόνο βασικές τις
λειτουργίες πομποδέκτη λεπτομέρειες του σας. Για
χρήσης Εγχειρίδιο Χρήστη στην και το , ανατρέξτε
παρακάτω διεύθυνση ή κώδικα URL QR .
https://manual.kenwood.com/files/B5K-0647-00.pdf
ΠΑΡΕΧΟΜΕΝΑ ΑΞΕΣΟΥΑΡ
Αφαιρέστε τον πομποδέκτη από τη συσκευασία με προσοχή Συνιστούμε πριν. , να
πετάξετε υλικό συσκευασίας αναγνωρίσετε αντικείμενα που περιγράφονται το , να τα
παρακάτω Εάν κάποιο αντικείμενο λείπει ή έχει καταστραφεί τη διάρκεια της. κατά
αποστολής αποστείλετε άμεσα μία αίτηση στο φορέα, .
Αρθρο Σειρά NX-5000 Σειρά NX-3000
TK-D740
TK-D840
Καλώδιο συ νεχούς ρεύματος με ασφάλειες (15 A) 1 1
Βάση Στήριξης 1 1
Μικρόφωνο 1 –
Υποδοχή στήριξης μικροφώνου 1 –
Λαμαρινόβιδα 4 x 16 mm 3 –
Σετ από βίδες
Λαμαρινόβιδα 5 x 16 mm 4 4
Βίδα με εξάγωνη κεφαλή με ροδέλα M4 x 6 mm 4 4
Ροδέλα ασφαλείας 4 4
Επίπεδη ροδέλα 4 4
Οδηγός Χρήστη 1 1
ΒΑΣΙΚΕΣ ΛΕΙΤΟΥΡΓΙΕΣ
Οθόνη
Αισθητήρας φωτισμού
Ένδειξη κατάστασης Ηχείο
ΗχείοΈνδειξη κατάστασης
Σειρά NX-3000
Σειρά NX-5000
Οθόνη
TK-D740/ TK-D840
Οθόνη
Ένδειξη TX/RX
Ένδειξη κατάστασης
Κουμπιά λειτουργίας
Κουμπιά λειτουργίας
Κουμπιά λειτουργίας
Μικρόφωνο
Διακόπτης PTT
Ηχείο
ΑΝΟΙΓΜΑ ΚΛΕΙΣΙΜΟ ΣΥΣΚΕΥΗΣ/
Πιέστε πλήκτρο ενεργοποιήσετε το [ ] για να τον .πομποδέκτη
Πιέστε πλήκτρο το [ ] ξανά για να απενεργοποιήσετε πομποδέκτη τον .
ΡΥΘΜΙΣΗ ΤΗΣ ΕΝΤΑΣΗΣ ΗΧΟΥ
Πιέστε πλήκτρο που είναι προγραμματισμένο ως το [ Αύξηση έντασης] για να
ανεβάσετε την ένταση ήχου του .
Πιέστε πλήκτρο που είναι προγραμματισμένο ως το [ Μείωση έντασης] για να
κατεβάσετε την ένταση ήχου του .
ΕΠΙΛΟΓΗ ΖΩΝΗΣ ΚΑΙ ΚΑΝΑΛΙΟΥ
Επιλέξτε την επιθυμητή ζώνη επιθυμητό κανάλι χρησιμοποιώντας πλήκτρα και το τα
που είναι προγραμματισμένα με λειτουργίες τις / [ ]Ζώνη επάνω [ Ζώνη προς τα
κάτω Κανάλι επάνω Κανάλι προς κάτω] [ ή ] [/ τα ].
ΕΚΠΟΜΠΗ
1 Επιλέξτε την επιθυμητή ζώνη κανάλι και .
2 PTT Πιέστε το διακόπτη και μιλήστε στο μικρόφωνο Αφήστε διακόπτη. το PTT για
να .λάβετε κλήση
• Για την καλύτερη ποιότητα ήχου κρατήστε μικρόφωνο απόσταση δυνατή , το σε
περίπου έως από στόμα 3 cm 4 cm το σας.
ΛΗΨΗ
Επιλέξτε την επιθυμητή ζώνη κανάλι Εάν στο επιλεγμένο κανάλι έχει και .
προγραμματιστεί σηματοδοσία θα ακούσετε μία κλήση μόνο εάν λαμβανόμενο , το
σήμα ταιριάζει με ρυθμίσεις πομποδέκτη τις του σας.
TRANSCETOR DIGITAL
GUIA DO UTILIZADOR
Este Guia do Utilizador cobre apenas as operações básicas
do seu rádio. Para utilizar o Manual do Utilizador detalhado,
consulte o seguinte URL ou código QR.
https://manual.kenwood.com/files/B5K-0647-00.pdf
ACESSÓRIOS FORNECIDOS
Desempacote cuidadosamente o transcetor. Recomendamos que identifi que os itens
listados abaixo antes de descartar o material de embalagem. Se algum item estiver em
falta ou danifi cado, faça imediatamente uma reclamação à sua transportadora.
Artigo Série NX-5000 Série NX-3000
TK-D740
TK-D840
Cabo de alimentação de CC com fusíveis (15 A) 1 1
Suporte de montagem 1 1
Microfone 1 –
Gancho de microfone 1 –
Parafuso auto-roscante de 4 x 16 mm 3 –
Jogo de parafusos
Parafuso auto-roscante de 5 x 16 mm 4 4
Parafuso de cabeça sextavada de M4 x 6 mm com anilha 4 4
Anilha de pressão 4 4
Anilha plana 4 4
Guia do utilizador 1 1
OPERAÇÕES BÁSICAS
Display
Sensor de iluminação
Indicador do estado Altifalante
AltifalanteIndicador do estado
Série NX-3000
Série NX-5000
Display
TK-D740/ TK-D840
Display
Indicador TX/RX
Indicador do estado
Botões de operação
Botões de operação
Botões de operação
Microfone
Interruptor PTT
Altifalante
MANEIRA DE LIGAR/DESLIGAR A ALIMENTAÇÃO
Prima para ligar o transcetor.[ ]
Prima [ ] novamente para desligar o transcetor.
AJUSTE DO VOLUME
Pressione o botão programado como [Aumento do volume] para aumentar o volume.
Pressione o botão programado como [Diminuição do volume] para diminuir o volume.
SELEÇÃO DE UMA ZONA E CANAL
Selecionar a zona e o canal pretendidos usando os botões programados como
[Incrementa zona] [Decrementa zona] [Incrementa canal] [Decrementa canal]/ e / .
A TRANSMITIR
1 Selecione a zona e o canal pretendidos.
2 PTT Prima o interruptor e fale no microfone. Solte o interruptor para receber.PTT
• Para melhor qualidade sonora, segure o microfone a aproximadamente 3 ou 4
cm da boca.
A RECEBER
Selecione a zona e o canal pretendidos. Se a sinalização tiver sido programada no
canal selecionado, ouvirá uma chamada apenas se o sinal recebido corresponder às
defi nições do seu transcetor.
Product specificaties
| Merk: | Kenwood |
| Categorie: | Radio communicatie |
| Model: | NX-3820 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kenwood NX-3820 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Radio communicatie Kenwood
16 April 2022
23 April 2022
2 Mei 2022
2 Mei 2022
30 April 2022
23 April 2022
15 Augustus 2022
7 Mei 2022
16 Augustus 2022
3 Mei 2022
Handleiding Radio communicatie
- Radio communicatie Motorola
- Radio communicatie Albrecht
- Radio communicatie Baofeng
- Radio communicatie Furuno
- Radio communicatie GTV
- Radio communicatie Icom
- Radio communicatie Intek
- Radio communicatie Multi Care Systems
- Radio communicatie President
- Radio communicatie Rexon
- Radio communicatie Simrad
- Radio communicatie Spektrum
- Radio communicatie Stabo
- Radio communicatie Swissphone
- Radio communicatie Team
- Radio communicatie Vertex Standard
- Radio communicatie Wintec
- Radio communicatie Wouxun
Nieuwste handleidingen voor Radio communicatie
3 September 2023
3 September 2023
2 September 2023
26 Augustus 2023
26 Augustus 2023
31 Januari 2023
31 Januari 2023
14 Juli 2023
31 Januari 2023
13 Mei 2023