Kenton D-Sync Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Kenton D-Sync (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
DDDD----SYNCSYNCSYNCSYNC
Bi-directional MIDI to DIN Sync Converter
Operating manual
2
Description
The D_SYNC has a MIDI Input and a MIDI Output for connecting to your MIDI
devices. The D_SYNC has an opto-coupled MIDI Input for optimum performance.
The D-Sync also has both a DIN Sync Input and a DIN Sync Output for connecting to
your sequencer and/or drum machine etc.
The D_SYNC is powered by a multi-region mains adaptor (supplied), so it doesn’t
need periodic battery changes to keep it working, enabling you to “fit and forget”.
If required, you can also power D-Sync from a USB port of your computer or USB
Hub.
Connecting
Plug the large plug end of the supplied USB lead into the supplied 5V power adaptor
and the other end into the D-Sync. Ensure the power adaptor is plugged in to the
mains and that the ACTIVE LED on the D_SYNC is on (steady green).
To convert MIDI to DIN Sync:
Connect the MIDI output of your keyboard(s) and/or computer to the MIDI Input of
the D_SYNC and connect the SYNC Out port of the D_SYNC to the DIN-SYNC input
of the device you want to control.
To convert DIN Sync to MIDI to MIDI:
Connect the DIN SYNC output of your keyboard and/or computer to the SYNC Input
of the D_SYNC and connect the MIDI Out port of the D_SYNC to the MIDI input of
the device you want to control.
You can convert in both directions at the same time if you need to do this.
The USB connector is used for power ONLY. D-Sync is not a USB MIDI device.
Status LED
:
The LED will show steady green when power is applied and flicker to indicate when
MIDI messages are being received.
Firmware version Request
:
A firmware version request must be issued within 10 seconds of power being applied
to the unit, otherwise it will be ignored.
The firmware version request message is - F0 00 20 13 16 60 F7 (hex)
The unit replies with the version number as F0 00 20 13 16 6F xx xx xx xx F7 (hex).
Where xx is a number in ASCII and the leftmost digit is the most significant.
For example - F0 00 20 13 16 6F 31 32 33 34 F7 (hex) = version number 1234
3
Specification
Power Input: USB Mini-B socket (used for power only)
Power : 5V DC regulated @ 50mA
MIDI ports: 1 x In, 1 x Out (5 pin DIN sockets)
SYNC ports: 1 x In, 1 x Out (5 pin DIN sockets)
Weight: 150g (excluding power supply)
Dimensions: 110 x 55 x 35 mm
Power supply: Multi-region switch mode power supply supplied with unit.
Warranty
The D_SYNC comes with a 12 month (from purchase date) back to base warranty,
(i.e. customer must arrange and pay for carriage to and from Kenton Electronics Ltd).
www.kenton.co.uk
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
version 1v00 e. & o. e. 16th June 2015


Product specificaties

Merk: Kenton
Categorie: Niet gecategoriseerd
Model: D-Sync

Heb je hulp nodig?

Als je hulp nodig hebt met Kenton D-Sync stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Kenton

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd