Kathrein ZSO 181 Handleiding

Kathrein Niet gecategoriseerd ZSO 181

Lees hieronder de 📖 handleiding in het Nederlandse voor Kathrein ZSO 181 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1 / 2

ZSO 181 23710015

Support frame for sat antennas

Intended use

The ZSO 181 support frame is intended exclusively for

securing a sat antenna (such as the CAS 180) to the

ground.

Any use other than this will invalidate the warranty or

guarantee.

About these instructions

This document is part of the product. These instructions

describe how to install and connect the ZSO 181 support

frame.

►Do not install and use the device until you have read

and understood this document.

►Keep this document for reference throughout the life

of the device. Pass this document on to any subse-

quent owners and users.

The latest version of these instructions for use can be

found on our website: www.kathrein-ds.com

Securing the support frame

There are two main ways in which the support frame can be secured. These require on the one hand the installation of

IPB 200 beams (see Fig. 2) and on the other hand the laying of a ﬂat concrete slab (see Fig. 3).

Fig. 1: ZSO 181

Slab, IPB 200 and clamping plates

Fig. 2: Installation on a slab with IPB 200, using clamping plates

Slab and anchor bolts with anchor rod (M24)

When setting up the ZSO 181 support frame on concrete using anchor bolts and an anchor rod

1), we recommend you use

the support frame as a template to drill the necessary eight anchor holes. The theoretical dimensions are shown in Fig.

1) anchor bolts Upat UKA 3 - M24:

Please comply with the current "General building approval

conditions"

Fig. 3: Installation on a slab with anchor bolts and an anchor rod

Vmax

in km/h

anchor bolts/anchor rod 2) Clamping plates on IPB 200

W x H in m in m W x H in m∅

200 1.60 x 1.60 1.80 1.30 x 1.30

180 1.50 x 1.50 1.80 1.30 x 1.30

160 1.50 x 1.50 1.70 1.30 x 1.30

www.kathrein-ds.com | support@kathrein-ds.com 936500132/b/A4/STM/0322/GB | Subject to change.

KATHREIN Digital Systems GmbH | Anton-Kathrein-Str. 1–3 | 83022 Rosenheim | Germany | Phone +49 731 270 909 70

Minimum slab dimensions for various maximum wind speeds

Fig. 4: Slabs with rectangular and circular layouts

The fastening points near the edge

should be spaced equally at a

distance ar.

Recommended minimum dimensions of slabs

2) The distances from the edge

must be in accordance with the

"General building approval condi-

tions” for concrete of quality B25

Leading dimensions - forces exerted at the attachment points - weight

Flow resistance of CAS 180:

Wind surface area: 2.83 m2

Drag coecient cW to ﬂow inclination: 1,4

Forces at the fastening points:

Wind speed 200 km/h 180 km/h 160 km/h

Dynamic pressure 1.90 kN/m21.60 kN/m21.25 kN/m2

Windload of the antenna 7.53 kN 6.34 kN 4.95 kN

Torsional moment of the

antenna to ﬂow indication 1.62 kNm 1.36 kNm 1.07 kNm

Position 1 2 3 4 1 2 3 4 1 2 3 4

Load type*

Tension in kN 10.4 2.3 5.7 9.5 8.8 1.9 4.8 8.0 6.9 1.5 3.8 6.3

Tension in kN

(Resulting from tensile

and transverse load)

13.1 8.8 7.6 12.1 11.1 7.4 6.4 10.2 8.6 5.8 5.0 8.0

Compression in kN 16.2 2.4 6.7 10.0 13.7 2.0 5.7 8.4 10.7 1.6 4.4 6.6

Compression in kN

(Resulting from tensile

and transverse load)

18.8 8.2 7.3 12.9 15.9 6.9 6.2 10.9 12.4 5.4 4.8 8.5

Transverse load in KN 9.6 8.8 6.3 8.1 8.1 7.4 5.3 6.8 6.3 5.8 4.2 5.3

* the load data of the dierent load types result from partly dierent, the respective critical

load cases.

Weight:

Support frame: approx. 137 kg

CAS 180: approx. 60 kg

Product specificaties

Merk:	Kathrein
Categorie:	Niet gecategoriseerd
Model:	ZSO 181
Kleur van het product:	Zilver
Gewicht:	137000 g
Hoogte:	1455 mm
Diameter:	114 mm
Compatibiliteit:	CAS 180