Kathrein HDM 141 Handleiding

Kathrein Niet gecategoriseerd HDM 141

Lees hieronder de 📖 handleiding in het Nederlandse voor Kathrein HDM 141 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

1 / 10

HDM 140 218456

HDM 141 218457

HDM 143 218458

SAT Jointed Mast

Conversion SAT Jointed Mast

The SAT jointed masts HDM 140 and HDM 141 as well as the conversion SAT jointed mast HDM 143 are designed for satel-

lite reception from mobile locations, i.e. stationary caravans or motorhomes. They are compatible with the BAS 60/66

planar antennas.

Any other use or failure to comply with these user instructions and the documentation and instructions accompanying

the equipment will void the warranty or guarantee.

Tip Keep these instructions for further reference and give them to the next owner if the jointed mast is sold.

■High usability and comfort due to rotation and align-

ment of the antenna from inside the vehicle

■With two ﬁtted connecting cables and four F-type

connectors

■Masts made of duralumin, swivel heads of die-cast

aluminium

■Maximum speed limit: 130 km/h with a lowered

antenna

HDM 140

■To mount the BAS 60/66 planar antenna on the roof of

a caravan or mobile home

■With a mounting bracket and a roof seal

HDM 141

■Smaller model to mount the BAS 60/66 planar antenna

on the roof of a caravan or mobile home

■With a mounting bracket and a roof seal

HDM 143

■To convert a terrestrial system, e.g. HD35, to the BAS

60/66 planar antenna

■The roof duct bracket can continue to be used

HDM 140 HDM 141 HDM 143

Features

Intended use

2 / 10

Scope of delivery

No. Description

①Upper part of the swivel head (antenna connection piece with gearing)

②Plug for the joint axle

③Joint tube

HDM 140, HDM 143: 750 mm long

HDM 141: 560 mm long

④Sealing sleeve with spring

⑤Roof duct with screws (6, 4.2x19)

⑥Knurled nut

⑦Cone nut (red)

⑧Mounting bracket with automatic clamping plate and wood screws (5, 4x40)

⑨Automatic clamping plate with spring

⑩Star knob

⑪Coaxial cable (2, 4 m each). One cable is marked in red on both ends.

⑫F-type connectors (4)

⑬Turning handle with a screw (1, M5x8)

⑭Joint shaft

⑮Crank handle with a screw (1, M4x12)

Please note that items to are not included in the ④ ⑩

HDM143 scope of delivery.

Reception site

To guarantee satellite reception, it is absolutely necessary to make sure that there are no obstacles between the antenna

and the satellite at the reception site. Make sure that the antenna is not shadowed by rooftop elements, such as roof

boxes, air-conditioning units, solar panels, trees, buildings, etc.

Choose a site at which the antenna has an imaginary line of sight of the satellite towards the south at an angle of 15° to

55° relative to the horizon. Make sure that this line of site is not interrupted.

3 / 10

Safety instructions

DANGER

High voltage!

Danger to life when touching electrical installations.

►Maintain a minimum clearance of 1 m from all other electrical devices.

WARNING

Fall hazard!

Injuries due to falling from the roof during installation.

►Position the vehicle horizontally.

►Wear stable shoes with non-slip soles.

WARNING

Damage or opening in the roof!

Injuries due to damage or opening in the roof.

►Make sure that the vehicle roof is sufciently strong and stable. In case of doubt, contact a qualied specia-

list retailer or the manufacturer of your vehicle.

►Make sure that no one is inside the caravan or mobile home under the antenna during installation.

WARNING

Slip hazard!

Injuries on the roof or climbing aid, e.g. ladder.

►Make sure that the roof and climbing aid are dry, clean and non-slip.

WARNING

Trip hazard due to cables!

Trip injuries.

►Lay cables in such a way that no one can tread on them or trip over them.

NOTICE

Risk of accident!

Material damage due to antenna collision with objects.

►Tilt and lower the antenna before starting a journey.

Select the installation site

Select the installation site far enough from the sides of the vehicle so that the antenna does not protrude over them

when lowered down for the journey.

Tools

Tools necessary for the installation:

●gimlet

●le

●screwdriver

●handsaw

●drill

●circular drill bit (optional)

Tip To install the jointed mast, drill a hole of 38 mm in the roof. If your vehicle has a sloped or arched roof, we ∅

recommend increasing the hole up to 42 mm.∅

Installation

Product specificaties

Merk:	Kathrein
Categorie:	Niet gecategoriseerd
Model:	HDM 141
Gewicht:	1600 g
Hoogte:	765 mm
Diameter:	34 mm
Afmetingen verpakking (BxDxH):	1020 x 130 x 100 mm
Materiaal:	Aluminium
Compatibiliteit:	BAS 60
Aantal producten inbegrepen:	1 stuk(s)