Jung ZLLHS4 Handleiding


Bekijk gratis de handleiding van Jung ZLLHS4 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over Jung ZLLHS4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/12
ZigBee radio hand-held transmitter 4-gang
ZigBee radio hand-held transmitter 4-gang
ZigBee radio hand-held transmitter 4-gang
ZigBee radio hand-held transmitter 4-gang
ZigBee radio hand-held transmitter 4-gangZigBee radio hand-held transmitter 4-gang
Art. no.: ZLLHS4
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Battery safety instructions
Battery safety instructions
Battery safety instructions
Battery safety instructionsBattery safety instructions
This device or its accessories are supplied with batteries in the form of button cells.
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
ous substances may cause severe internal burns leading to death within 2 hours.
ous substances may cause severe internal burns leading to death within 2 hours.
ous substances may cause severe internal burns leading to death within 2 hours.
ous substances may cause severe internal burns leading to death within 2 hours.ous substances may cause severe internal burns leading to death within 2 hours.
Keep new and used batteries away from children.
children.
If you suspect that a battery has been swallowed or is in any orifice of the body, seek immediate
medical attention.
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due toWARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
leakage.
leakage.
leakage.
leakage.leakage.
Do not heat or throw batteries into fire.
Do not reverse polarity, short-circuit or recharge batteries.
Do not deform or disassemble batteries.
Replace batteries only with an identical or equivalent type.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
Device components
Device components
Device components
Device componentsDevice components
Figure1
(1) LED
The LED lights up green as long as the button is pressed.
When the "Individually set lights" or "Service functions" functions are active, the LED
lights up in red.
During commissioning the LED indicates the functional state, see chapter 4.
(2) Buttons for switching/dimming
(3) Scene buttons/functional buttons
Intended use
Intended use
Intended use
Intended useIntended use
ZigBee Light Link transmitter for operation of participants conforming with ZigBee Light
Link, e.g. lamps, luminaires, light bands, ballast units, adapters
The transmitter can cooperate with ZigBee Light Link devices or systems of other manu-
facturers, e.g. Philips Hue.
Hereinafter, the participants will be called luminaires.
1 / 12
82595233 18.12.2019
J0082595233
ZigBee radio hand-held transmitter 4-gang
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
Supports the adjustment of: brightness, colour temperature, light colour and colour satura-
tion
Corresponds with the ZigBee Light Link specification
Saving and recalling of up to 6 scenes
Status indication with LED
Battery-powered device
Software update using separate additional device via radio possible
Inserting the battery
Inserting the battery
Inserting the battery
Inserting the batteryInserting the battery
Obey the battery safety instructions.
Unscrew the battery compartment on the back of the hand-held transmitter. Use a small
flat head screwdriver or Phillips screwdriver PH1 for this.
Keep contacts of batteries and device free of grease.
Apply battery to the positive contact of the battery holder. Observe polarity: the positive
pole of the battery must be at the top.
Press gently on battery to snap it in.
Close and screw the battery compartment with max. 0.3Nm.
Hand-held transmitter is ready for operation.
2
2
2
22 Basic functions
Basic functions
Basic functions
Basic functionsBasic functions
2.1 Switching or dimming luminaires
2.1 Switching or dimming luminaires
2.1 Switching or dimming luminaires
2.1 Switching or dimming luminaires2.1 Switching or dimming luminaires
All luminaires connected to the transmitter will be collectively switched or dimmed.
Figure2
Switch: Short press on or button.Ɔ ƍ
Dim: Long press on the or button. The dimming process ends when the buttonƆ ƍ
is released.
2.2 Recalling scenes
2.2 Recalling scenes
2.2 Recalling scenes
2.2 Recalling scenes2.2 Recalling scenes
Scenes help you to save individual settings of one or more persons and to recall them with a
single press of a button.
Figure3
Press the corresponding scene button briefly until .Ƈ ƌ
The luminaires that belong to that scene will switch to the saved values.
2 / 12
82595233 18.12.2019
J0082595233
ZigBee radio hand-held transmitter 4-gang
2.3 Saving scenes
2.3 Saving scenes
2.3 Saving scenes
2.3 Saving scenes2.3 Saving scenes
If the scene shall be recalled from several transmitters, it must be saved at each transmit-
ter separately.
Luminaires that shall not be part of the scene must be disconnected prior to saving.
Set the luminaires to the desired values, see chapter 3.
Figure4
Press the corresponding scene button to for longer than 4 seconds.Ƈ ƌ
LED lights up in green for 3 seconds. The scene has been saved on the selected button.
3
3
3
33 Setting luminaires individually
Setting luminaires individually
Setting luminaires individually
Setting luminaires individuallySetting luminaires individually
3.1 Selecting a luminaire
3.1 Selecting a luminaire
3.1 Selecting a luminaire
3.1 Selecting a luminaire3.1 Selecting a luminaire
Figure5
Simultaneously press the and Ɔ ƍ
buttons shortly.
LED lights up red.
All luminaires that are connected to the transmitter are selected. The luminaires acknow-
ledge this by e.g. short flashing.
If only a single luminaire shall be set, press the and Ɔ ƍ
buttons simultaneously
until the respective luminaire is selected. When the last luminaire connected to the trans-
mitter has been selected, all luminaires connected to the transmitter will be selected upon
the next press.
Switch on the luminaire by shortly pressing the button.ƍ
Set the luminaire. The available settings depend on the luminaire used.
Luminaire selection and Ǝ Ɔ ƍ
Switching and brightness or Ǝ Ɔ ƍ
Light colour or Ə Ƈ ƈ
Colour saturation or Ɛ Ɖ Ɗ
Colour temperature or Ƒ Ƌ ƌ
Wait for approx. 6 seconds until the transmitter switches back the basic functions.
As an option, save the settings as a scene, see chapter 2.3.
3 / 12
82595233 18.12.2019
J0082595233


Product specificaties

Merk: Jung
Categorie: Niet gecategoriseerd
Model: ZLLHS4

Heb je hulp nodig?

Als je hulp nodig hebt met Jung ZLLHS4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden