Jung LS 5178 TSM Handleiding
Jung
Niet gecategoriseerd
LS 5178 TSM
Bekijk gratis de handleiding van Jung LS 5178 TSM (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Jung LS 5178 TSM of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Room temperature controller module 2-gang
Room temperature controller module 2-gang
Art. No. : ..5178 TSM
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise
safe operation cannot be ensured. Electrostatic discharges can cause defects in the
device.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Front view
Figure 2: Status LED
(1) Buttons 1...4
1/5
32589703
J:0082589703
11.04.2014
(2) Illuminable inscription panel
(3) Operation LED
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
- Single-room temperature control in KNX installations
- Operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, recalling and
saving light scenes, etc.
- Installation in appliance box according to DIN 49073
Product characteristics
All buttons can be assigned with push-button sensor functions or functions for controller
operation.
- Measurement of the room temperature
- Room temperature control with setpoint value specification
- Extension for room temperature controller
- Pushbutton functions switching, dimming, Venetian blind control, value transmitter, scene
recall, etc.
- One or two functions per button
- Completion with 2x set of buttons (accessory)
- Illuminable inscription panel
- Two red status LEDs per button – red, green or blue adjustable
- One operation LED as an orientation light and to indicate the programming status – red,
green or blue adjustable
- Brightness of status LED, operation LED and labelling field adjustable; switchable while in
operation, e.g. during the night
- Disabling function: Disable or function switch-over of all or of individual pushbutton
functions
- Alarm function, optionally with confirmation by pressing any button
- Energy saving mode (for operation without controller function)
- Integrated bus coupling unit
- Connection for a pushbutton extension module, for expansion with up to eight additional
buttons
Energy saving mode
The device switches to the energy saving mode after a preset time or by an external telegram.
In energy saving mode all LED functions are switched off.
The device leaves the energy saving mode – depending on programming – on operation or by
an external telegram.
iOperations from the energy saving mode are executed immediately.
4 Operation
The operation of functions or electrical consumers can be set individual for each device. Two
operating modes are used:
- One-button operation (pushbutton function):
Switching on or off or dimming brighter/darker, e.g. of lighting, takes place alternately when
the button is pressed repeatedly.
- Two-button operation (rocker function):
Two buttons next to each other form a function pair. Pressing the left button, for example,
switches or dims lighting on or brighter, pressing the right one switches it off or makes it
darker.
2/5
32589703
J:0082589703
11.04.2014
Room temperature controller module 2-gang
Operating a function or load
oSwitch: Short press on button.
oDim: Long press on the button.
oMove Venetian blind: Long press on button.
oStop or adjust Venetian blind: Short press on button.
oCall up light scene: Short press on button.
oSave light scene: Long press on button.
oSet value, e.g. brightness or temperature setpoint: Short press on button.
oAdjusting value: Press button for a long time.
oOperating the controller: Press the button briefly.
iDepending on programming, a button triggers several functions after a longer press or
triggers another function if opposite buttons are pressed simultaneously.
5 Information for electrically skilled persons
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
5.1 Fitting and electrical connection
Mounting and connecting the device
Figure 3: Mounting of the continuous controller module
(4) Supporting frame
(5) Frame
(6) Continuous controller module
(7) Fastening screws, plastic
(8) Buttons
(9) Connection terminal for extension module (optional)
(10) KNX connection terminal
(11) Box screws
3/5
32589703
J:0082589703
11.04.2014
Room temperature controller module 2-gang
Product specificaties
| Merk: | Jung |
| Categorie: | Niet gecategoriseerd |
| Model: | LS 5178 TSM |
| Kleur van het product: | Wit |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung LS 5178 TSM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Jung
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
23 Mei 2025
15 Mei 2025
15 Mei 2025
15 Mei 2025
15 Mei 2025
Handleiding Niet gecategoriseerd
- Buxton
- Profoon
- Linhof
- Maze
- Tams Elektronik
- Rotolight
- SEA-PRO
- Nous
- STANDARD
- Mammut
- Urrea
- Sun Pumps
- Crock-Pot
- Oase
- Cruz
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025