Jung 2090EB Handleiding

Bekijk gratis de handleiding van Jung 2090EB (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 53 mensen en kreeg gemiddeld 4.5 sterren uit 8 reviews. Heb je een vraag over Jung 2090EB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

KNX Control unit

Ref.-no.: 2090EB

Operating Instructions

Control unit

1. System information

This device is a product of the instabus EIB-system and complies with

EIBA directives. Detailed technical knowledge obtained in instabus-

training courses is a prerequisite for proper understanding.

Functionality of this device is depending on the software. Detailed

information on loadable software and attainable functionality may be

taken from the manufacturer’s product database.

Planning, installation and commissioning of the unit is done by means of

EIBA certified software.

Indications of danger

Caution !

Caution ! The installation and assembly of melectrical equipment

may be carried out only by a skilled person.

2. Function

The 1 - 10 V Control Unit allows the dimming of fluorescent lamps with

controllable electronic ballast’s and 1 - 10 V interface. The number of

controllable electronic ballast’s to be dimmed by one Control Unit

depends on the signal current of individual electronic ballast’s and is

type-dependent.

Commands are issued by operation of touch sensors or via the binary

inputs of the instabus EIB-system. The unit is protected by a 10 amps

trip-out overcurrent switch.

3. Connection

The unit is connected as shown on the opposite gure. Legend :

c 1 - 10 V control voltage (from electronic ballast)

d Power supply for connected ballasts

Stand: Jun-08 325 025 03

Product specificaties