Jung 804.18 W Handleiding
Jung
Niet gecategoriseerd
804.18 W
Bekijk gratis de handleiding van Jung 804.18 W (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Jung 804.18 W of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
Key switches
21.11.20241 / 30024006900
Key switches
Surface-mounted housings
Ref.-no.: 804.18 W, 806.18 W, 833.18 W, 834.18 W
Operating instructions
1 Safety instructions
Electrical devices may only be installed and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow the instructions in full.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
Fig. 1: Device components
(1) Housing
(2) Insert
(3) Prole half cylinder
(4) Centre plate
3 Function
Intended use
- for prole half cylinder with approx. 40 mm overall length (DIN 18252), e.g. art. no.: 28, 28 G1
Designs
Blind reversing switch, 1-pole (1 motor)
804.18 W
Blind reversing push-button, 1-pole (1 motor)
834.18 W
Push-button (2-way), 1-pole
833.18 W,
Universal-o 2-way switch, 1-pole
806.18 W
4 Information for electrically skilled persons
Mounting and electrical connection
DANGER
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power and cover live parts in the area!
Connecting surface-mounted housing
• Feed the cable through the opening in the housing.
For this, use the included sealing gaskets.
• Connect the key switch acc. to the connection diagram. (g. 5 to g 7)
4
1
32 45
GB
Key switches
21.11.20242 / 30024006900
Adjusting the cam on the prole half cylinder
180°
0°
300°
240°
210°
330°
30°
60°
90°
120°
150°
270°
Fig. 2 and 3: Adjusting the cam on the prole half cylinder
Example:
- Adjustable cam (6) on a prole half cylinder with 12 positions (0° to 330°)
- Fork (7) of a blind switch in the Stop switching state, for switching states see chapter operation
• Set the cam so that it is either located inside the fork or engages with the fork from the outside after the locking
cylinder has been mounted.
For this, use a screwdriver to press down on the two locking pins (8) and turn the cam into position. Only one of
the two locking pins can be pressed down at a time.
- Cam inside the fork:
The key can only be removed in the Stop or O switching state.
- Cam on the outside of the fork:
The key can also be removed in the Up/Down or On switching state.
- Consider the integrated protection against dismounting, see chapter dismounting.
Installing the prole half cylinder
See gure 1
• Fasten the earthing lug (5) and locking cylinder (3) to the centre plate (4) using the included screws.
iIf other locking cylinders are used, these may only have an opening for keys on one side. Otherwise IP44 is not
possible.
Dismounting
Integrated protection against dismounting:
120°
60°
30°
0°
90°270°
240°
150°
210°
Fig. 4: Integrated protection against dismounting
If the cam is in the 0°, 30°, 60°, 90°, 120°, 150°, 210°, 240° or 270° position on the outside of the fork, the centre
plate is secured against unauthorised dismounting.
Dismounting of the centre plate without a key is not possible in this case.
5 Operation
Important:
The key can only be inserted and removed in the 0° position.
• Turn the key in the locking cylinder to the left or right to the following switching states.
Blind switches and push-buttons
The motors connected to the respective terminals run forward or backward depending on the switch position.
Depending on the design, 1 or 2 blind motors can be connected.
Up Motor runs forward.
Stop Motor is switched o.
Down Motor runs backward.
76
8 8
Key switches
21.11.20243 / 30024006900
1-way switches and push-buttons
The devices connected to the respective terminals are switched on or o according to the switch position.
| On
0 O
6 Connection diagrams
804.18 W, 834.18 W 833.18 W
N
L
PE
N
L
PE
Fig. 5 and 6: Connection diagrams
806.18 W
N
L
PE
Fig. 7: Connection diagram
7 Technical data
Rated voltage AC 250 V ~
Rated current
804.18 W 10 AX
833.18 W, 834.18 W 10 A
806.18 W 16 AX
Connection screw terminals
rigid and exible wires up to 2.5 mm²
8 Accessories
Prole half cylinder 28, 28 G1
for equal lock prole half cylinder (28 G1)
spare key 28 G1 SL
9 Warranty
The warranty is provided within the framework of the statutory provisions via the specialised trade.
Product specificaties
| Merk: | Jung |
| Categorie: | Niet gecategoriseerd |
| Model: | 804.18 W |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung 804.18 W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Jung
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Roswell
- Western Digital
- Billow
- GC Audio
- IDIS
- Powerfix
- Bruynzeel
- MIYO
- Drive Medical
- T'nB
- Blade
- Leica
- LD Systems
- Bluestork
- Yellow Garden Line
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025