Jung 2076-2T Handleiding
Jung
Niet gecategoriseerd
2076-2T
Bekijk gratis de handleiding van Jung 2076-2T (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over Jung 2076-2T of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
KNX Pushbutton interface
Ref-no.: 2076-2T
2076-4T
Operating Instructions
2-channel pushbutton interface
4-channel pushbutton interface
1. Safety warnings
Electrical equipment must be installed and fitted by qualified
electricians only and in strict observance of the relevant accident
prevention regulations. Failure to observe any of the installation
instructions may result in irreparable damage, in fire and in other
hazards.
2. System information
This unit is a product of the instabus-EIB-System and corresponds to the
EIBA Guidelines.
Detailed technical knowledge acquired in instabus training courses is a
prerequisite for the understanding of the system.
The functions of the device are software-dependent.
Detailed information on the software and the functions implemented and
the software itself are available from the manufacturer’s product data
bank.
Planning, installation and commissionning of the device are effected with
the help of EIBA-certified software.
The updated product database and the technical description are available
in the Internet under www.jung.de.
Stand: Jun-08 825 238 13
KNX Pushbutton interface
Ref.-no.: 2076-2T
2076-4T
3. Function
The 2-channel and 4-channel pushbutton interfaces are equipped with
2/4 independent channels which – depending on parameterization – may
be used as inputs or alternatively also as outputs (channels 1 or 2 only).
The pushbutton interfaces can evaluate at their potentialfree inputs up to
2/4 pushbutton / switch states with a common reference potential and
send the corresponding telegrams over the instabus EIB.
The telegrams may be telegrams for switching or dimming, for
blind/shutter control or for value transmitter applications (dimming value
transmitter, light-scene extension, temperature or brightness value
transmitters).
Moreover, switch or pulse counters are available (2-channel type: 1
counter, 4-channel type: 2 counters).
As an alternative, channels 1 and 2 can control up to 2 light-emitting
diodes (LED) as independent outputs.
To increase the output current (see technical data), these channels can
also be connected in parallel with the same parametrization.
The outputs are protected against short circuits, overload and wrong
polarity.
4. Safety warnings
The connection of 230 V signals or other external voltages to the
inputs is not permitted!
The voltage potentials of the connecting lines for the contacts and
the LEDs are not electrically separated from the the bus voltage.
Connect ONLY potential-free pushbuttons / switches to the inputs.
5. Fitting instructions
To prevent EMC-related interference, do not run the lines to the inputs
(D) in parallel with lines lines carrying mains voltage or with lines feeding
loads.
Figure 1
Fig. 1:
The bus is connected with bus connecting terminal (A).
The physical address is programmed by means of programming button
(B) and programming LED (C).
2
KNX Pushbutton interface
Ref.-no.: 2076-2T
2076-4T
Wiring of 4-channel pushbutton interface
Switches and pushbuttons or LEDs are connected to the device by
means the connecting cable supplied (D) as shown in figs. 2 and 3.
Colour coding:
Green (GN): channel 1 (E1/A1)
Red (RD) : channel 2 (E1/A2)
Yellow (YE) : channel 3 (E3)
Pink (PK) : channel 4 (E4)
Grey (GY) : reference potential (com)
Figure 2
Fig 2:
Example for 4-channel pushbutton interface with 4 inputs
Figure 3
Fig. 3:
Example for 4-channel pushbutton interface used with 2 inputs and 2
outputs
3
Product specificaties
| Merk: | Jung |
| Categorie: | Niet gecategoriseerd |
| Model: | 2076-2T |
Heb je hulp nodig?
Als je hulp nodig hebt met Jung 2076-2T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Jung
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
Handleiding Niet gecategoriseerd
- Zenza Bronica
- Jata
- Spektrum
- Audison
- Prowise
- Autoscript
- EPEVER
- Wahoo
- Seymour Duncan
- Engel
- Mtx Audio
- Magic Care
- Gudsen
- Leisure
- Cresta
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025