Jung 4073 RF TSM Handleiding

Jung Niet gecategoriseerd 4073 RF TSM

Lees hieronder de 📖 handleiding in het Nederlandse voor Jung 4073 RF TSM (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

KNX RF radio transmitter module

KNX RF radio transmitter module 1-gang

Art. No. : 4071 RF TSM

KNX RF radio transmitter module 2-gang

Art. No. : 4072 RF TSM

KNX RF radio transmitter module 3-gang

Art. No. : 4073 RF TSM

KNX RF radio transmitter module 4-gang

Art. No. : 4074 RF TSM

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Keep button cells out of reach of children! If button cells are swallowed, get medical help

immediately.

Risk of explosion! Do not throw batteries into fire.

Risk of explosion! Do not recharge batteries.

The radio communication takes place via a non-exclusively available transmission path,

and is therefore not suitable for safety-related applications, such as emergency stop and

emergency call.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: 4-gang radio pushbutton module

(1) Base plate

(2) Fastening screws for the base plate

(3) Design frame

(4) Pushbutton module with adapter frame (see adapter frame assembly instructions)

(5) Fastening screws

(6) Buttons

1/6

32591013

j0082591013 18.01.2016

Figure 2: Pushbutton assignment 1-gang, 2-gang, 3-gang and 4-gang

(7) Acknowledgement/transmission LED, blue

(8) Status LED per button pair, red

3 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The range of a radio system depends on various external circumstances. The range can be

optimised by the choice of installation location. The product documentation for this device

contains application basics for the KNX radio system.

This device meets the requirements of the R&TTE directive 1999/5/EC and may be operated in

all EU and EFTA countries.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

carried out with the aid of KNX-certified software of version ETS5 or higher. You can find the

up-to-date product database, technical descriptions and declaration of conformity on our

website.

Intended use

- Radio operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, brightness

values, calling up and saving light scenes.

- Operation in cabled KNX systems via media coupler (see chapter Accessories)

Product characteristics

- Pushbutton functions switching, dimming, Venetian blind control, value transmitter, scene

recall

- One, two, three or four button pairs for pushbutton function or rocker function

- Status indicator via status LED

- Battery-powered device

Energy saving mode

The device switches to the energy saving mode after a preset time. In energy saving mode, the

LEDs remains switched off. During operation, the energy saving mode is exited.

iOperations from the energy saving mode are executed immediately.

2/6

32591013

j0082591013 18.01.2016

KNX RF radio transmitter module

4 Operation

Operating a function or load

oSwitch: Short press on button.

oDim: Long press on the button.

oMove Venetian blind: Long press on button.

oStop or adjust Venetian blind: Short press on button.

oCall up light scene: Short press on button.

oSave light scene: Press button for longer than 5 seconds.

oSet value: Press button briefly.

LED function

Acknowledgement/transmission LED (7) lights up after pressing a button and goes out as soon

as the feedback has been received from the actuator. After the acknowledgement/transmission

LED goes out, the status LED (8) displays the actuator feedback. The display duration can be

changed by the programming or can be dispensed with entirely.

The acknowledgement/transmission LED flashes rapidly if a transmission error occurs.

5 Information for electrically skilled persons

5.1 Fitting and electrical connection

Fitting the device

To ensure good transmission quality, keep a sufficient distance from any possible sources of

interference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or

transformers.

iPerform commissioning procedures before installation (see chapter Commissioning).

oChange the battery (see chapter Changing the battery).

oScrew or glue the base plate (1) to an even surface. The label has to be at theTOP/OBEN

top.

oAttach design-frame (3) to the base plate.

oScrew wall transmitter module (4) to base plate.

iScrewing the screws too tightly could impair functions of the wall transmitter.

oSnap covers (6) on (figure 1).

Information on gluing mounting

To be able to fasten the pushbutton safely, the substrate must be flat and free of dust and

grease.

oRemove the rear, unpunched film of the enclosed adhesive pad.

oAlign the adhesive pad, stick it to the surface and smooth it out. Remove air bubbles.

oRemove the two inner segments of the front film.

oAlign the base plate to the external punching and stick it on.

iIn the case of multiple combinations, the abutting sides of the adhesive pads must be cut

along the external punching using a ruler and a cutter (figure 3).

3/6

32591013

j0082591013 18.01.2016

KNX RF radio transmitter module

Product specificaties

Merk:	Jung
Categorie:	Niet gecategoriseerd
Model:	4073 RF TSM
Kleur van het product:	Grijs
Type stroombron:	Battery, DC
Ondersteund aantal accu's/batterijen:	1
Maximumbereik:	100 m
Frequentie:	868 MHz
Compatibele batterij grootte:	CR2450N