Joy-it SBC-OLED01 Handleiding

Joy-it Monitor SBC-OLED01

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it SBC-OLED01 (7 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
OLED DISPLAY 128X64
SBC OLED01-
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
2. I2C ADRESSE
On the backside of the OLED display is a resistor, with which you can set
the I2C address of the display to 0x3D. In the delivery state, the display is
accessible via the I2C address 0x3C.
To do change the address, re solder the resistor marked in the figure.-
3. USAGE WITH ARDUINO
3.2 Code example
Before you can transfer the code example to your Arduino using your
Arduino IDE, you must first install the additional libraries Adafruit GFX
Library Adafruit_SSD1306 (released under the BSD License) and
(released under the ) from BSD License Adafruit.
These libraries allow you to use the display as easily and quickly as pos-
sible. You can search for and install them under
Sketch
→
Include Library
→
Manage Libraries…
.
You can download our code examples . You can upload the code to here
your Arduino using the button. Make sure that you have selected Upload
Port Board and correctly under
Tools
.
3.1 Connection
OLED Arduino Voltage translator
GND GND GND
VCC VCCb 5V
- 3,3 V VCCa
- A5 B2
SCL - A2
- A4 B1
SDA - A1
i


Product specificaties

Merk: Joy-it
Categorie: Monitor
Model: SBC-OLED01

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it SBC-OLED01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Joy-it

Handleiding Monitor

Nieuwste handleidingen voor Monitor