Joy-it SBC-LCD20x4 Handleiding

Joy-it Monitor SBC-LCD20x4

Lees hieronder de 📖 handleiding in het Nederlandse voor Joy-it SBC-LCD20x4 (10 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
20X4 LCD MODULE
I2C serial
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. USE WITH AN ARDUINO
Connecting the display
Connect the display to the pins of your Arduino like shown in the picture
or rather in the chart.
Arduino® Uno 20 x 4 LCD
GND GND
5 V VCC
SDA SDA
SCL SCL
This picture was made in .Fritzing
Note
On the back of the display, besides the connections, there is a potentio-
meter and a jumper.
The potentiometer is used to adjust the contrast of the display and by
removing the jumper, you can permanently turn oî ‚ the display's
backlight.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
Installation of the library
Before you can transfer the code example to your Arduino, you must
install first the additional library .LiquidCrystal_I2C
This library allows you an easy and fast usage of the display.
Therefore, open the library manager on your Arduino soî …ware.
Search now in the library manager for the library and LiquidCrystal_I2C
install it.


Product specificaties

Merk: Joy-it
Categorie: Monitor
Model: SBC-LCD20x4

Heb je hulp nodig?

Als je hulp nodig hebt met Joy-it SBC-LCD20x4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Joy-it

Handleiding Monitor

Nieuwste handleidingen voor Monitor