Jonsered CS2250 Handleiding

Jonsered Zaagmachine CS2250

Lees hieronder de 📖 handleiding in het Nederlandse voor Jonsered CS2250 (44 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
English
CS 2245
CS 2245S
CS 2250S
Operator
’s manual
Please read the oper
ator’s manual carefully and make sure you understand the instructions before using the machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specied in chapter
Technical data and on label.
Both of the operator
′
s hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Other symbols/decals on the mac
hine refer to special
certication requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine bef
ore
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order
to prevent unintentional
starting, the spark plug cap
must be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil
flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 19
Fuelling ................................................................. 20
Fuel safety ............................................................ 20
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 21
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 23
General working instructions ................................ 23
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 31
Carburettor adjustment ......................................... 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 31
Muffler .................................................................. 33
Starter .................................................................. 34
Air lter ................................................................. 35
Spark plug ............................................................ 36
Lubricating the bar tip sprocket ............................ 36
Needle bearing lubrication ................................... 36
Cooling system ..................................................... 36
”Turbo Air Cleaning” centrifugal cleaning .............. 37
Winter use ............................................................ 37
Maintenance schedule ......................................... 38
TECHNICAL D
ATA
T
echnical data ...................................................... 39
Bar and chain combinations ................................. 40
Saw chain ling and le gauges ........................... 40
EC-declaration of conformity ................................ 41

Product specificaties

Merk: Jonsered
Categorie: Zaagmachine
Model: CS2250

Heb je hulp nodig?

Als je hulp nodig hebt met Jonsered CS2250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Jonsered

Jonsered

Jonsered CS 2245 Handleiding

14 September 2023
Jonsered

Jonsered CS16i Handleiding

14 September 2023
Jonsered

Jonsered CS2250 Handleiding

13 September 2023
Jonsered

Jonsered CS 2255 Handleiding

13 September 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx

Worx Nitro WX542.9 Handleiding

26 April 2024
Fieldmann

Fieldmann FZP 25410-B Handleiding

15 April 2024
Milwaukee

Milwaukee M18 BJS Handleiding

10 April 2024
Rona

Rona Standard Plus-C Handleiding

10 April 2024
Rona

Rona Profi-C Handleiding

10 April 2024
Milwaukee

Milwaukee SCS 65 Q Handleiding

10 April 2024
Milwaukee

Milwaukee M12 BS Handleiding

10 April 2024
Milwaukee

Milwaukee M18 FMCS66 Handleiding

10 April 2024
Milwaukee

Milwaukee M18 BSX Handleiding

10 April 2024
Bavaria By Einhell

Bavaria By Einhell BFS 800E Handleiding

9 April 2024