Jonard Tools TK-RG64 Handleiding

Bekijk gratis de handleiding van Jonard Tools TK-RG64 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Jonard Tools TK-RG64 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Premier Tool Manufacturer Since 1958

Complete COAX Cable Kit - TK-RG64 | Instructions

1. Cut your RG6 COAX cable straight using

the CAT-16 Cable Cutters.

4. Pull the CST-92 off the cable, removing the

jacket and dielectric.

7. Place the connector (with it inserted into

the COAX cable) into the compression tool.

NOTE: Insert the center conductor into the

anvil first.

NOTE: If the dielectric of the cable is not at

the top of the base of the COAX connector, it

will not crimp properly.

2. Position the blade cartridge so that the

59 and 6 are facing the bottom of the tool

(opposite of the ringing handle).

While depressing the black lever of the CST-

92, insert the end of the COAX cable through

the opening until it meets the black arrow on

the back stop of the blade.

5. Using the hook and loop strip on the side

of the CST-92, brush all the exposed braid

downward, away from the center conductor.

8. With the connector in place, squeeze the

handle of the CTF-180M to crimp the COAX

connector.

3. Release the lever and rotate the CST-92

around the cable 3 times in each direction.

6. Next, push an RG6 connector onto the

cable until the dielectric reaches the top of

the base of the connector.

NOTE: This may be difficult to do. If you are

having trouble putting the connector on, you

can try twisting the cable while pushing it in.

If you’re still having trouble, lightly heating

the end of the cable jacket (using a lighter or

hair dryer) before inserting it can also make

it easier.

9. You have now connectorized the COAX

cable!

123

6

987

54

Product specificaties