Jonard Tools FLS-55 Handleiding

Bekijk gratis de handleiding van Jonard Tools FLS-55 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Jonard Tools FLS-55 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FLS-55

SINGLE-MODE & MULTI-MODE

FIBER OPTIC LIGHT SOURCE

INSTRUCTION MANUAL

6. Maintenance:

6.1 If the Light Source is not used for a long time, the light output port must be

protected with the dustproof cover.

6.2 When the Fiber Optic Light Source is used for a long period of time, the output port

may get dirty, which results in the output power decreasing. If there is a

noticeable loss in output power, the connector must be cleaned with a cotton swab

and alcohol. If it cannot be cleaned, please send it to the manufacturer for a

replacement.

6.3 If you are not planning to use the (FW-5) Light Source for a long period of time,

remove the batteries to prevent leakage.

6.4 Do not take the Fiber Optic Light Source apart. If there are any other issues, please

contact the manufacturer.

6.5 DO NOT look into the Light Source adapters directly while the light source is on.

The laser output will damage your eyes.

7. Trouble-shooting:

1 The output light is unstable or

decreases rapidly while operation.

Replace the batteries.

2 Output power is fluctuating. Try warming-up the device for 15 minutes,

then use it.

3 The output port is dirty. Clean the connector with a cotton swab and

alcohol.

4The device turns off automatically

after 10-15 minutes.

While the device is powered ON, press the

ON/OFF button once. The symbol in the

top-left corner will disappear, indicating the

auto-off feature has been turned off.

No.ProblemMeasures

Product specificaties