Jolin Krono Handleiding

Bekijk gratis de handleiding van Jolin Krono (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over Jolin Krono of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

KRONO

Multi-modal Programmable Clock Generator

KRONO is a4HP programmable multi-mode clock and rhythm generator module featuring tap tempo,

state persistence, CV group swap and 12 independent outputs

why

•To copy, sync and multiply clockswith algorithmic flexibility

•To generate complex, evolving, and synchronized clockpatterns via multiple outputs.

•To explore algorithmic rhythms (euclidean, chaos, polyrhythms) and musical ratios.

•To sync your system using tap tempoor external clock sources.

•To instantly save and recall the state for each operational mode.

with

•Sequencers:Drive step progression with synchronized clocks and various rhythmic

divisions/multiplications.

•Drum Modules / Samplers:Create dynamic, polyrhythmic, or probabilistic percussion patterns.

•Modular Effects (Delay, Chorus, etc.):Synchronize effect parameters to the master tempo.

•LFOs / Envelopes / VCAs:Trigger modulations and gates with rhythmic precision and

mathematical/musical relationships.

•Logic Modules:Combine KRONO's outputs to create even more intricate trigger sequences.

how

Set the Base Tempo:

•Tap Tempo:Rhythmically press the TAP button at least 3 times. KRONO record and averages the

intervals. The Aux LED blinks on each valid update. This base tempo is always present on outputs

1A and 1B.

•External Clock:Send a clock signal to the TAP input. KRONO automatically syncs after validating

stable pulsesand coping the external input clock. The Aux LED will blink when the new tempo is

copied. At this stage you can then remove the external clock jack and use it somewhere else in

your system.

Select Operational Modes:

1.Press and hold the TAP button until the Status LED becomes steady and then release it.

2.Clickthe MODbutton X times to select mode X (two clicks will select mode 2, etc.).

3.Click TAP to confirm the selection of mode X and activate it.

•The Status LED blinks X times to indicate the active mode. The Aux LED blinks upon confirmation.

•Automatic Save:Upon confirming a mode selection, KRONO automatically saves the current

tempo (from Tap or Ext Clock) and the Swap state (see below) associated with that specific mode

to the internal Flash memory – this will be preserved on power cycles.

Swap Groups A/B:

•Give the MODbuttona short pressor send a gate signal to the MOD in to swap.

•This action inverts the function/pattern assignment between the Group A outputs (2A-6A) and

Group B outputs (2B-6B). For example, in Euclidean mode, the K/N patterns swap between the

two groups.

•The Aux LED blinks to confirm the swap.

•The Swap state (active/inactive) is saved along with the base tempo when selecting a mode.

TIP:If you want to save the current tempo or swap state without changing the mode, simply re-select the

current mode.

Product specificaties