Jolin Getrekt Handleiding

Bekijk gratis de handleiding van Jolin Getrekt (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over Jolin Getrekt of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GETREKT

signal squarifier

GETREKTis a full analogue waveshaper an aggressive one. –

why

•To add saturation and harmonics.

•To disrupt folding - cut into pieces - clipping. –and

•To generate square waves from other control voltage signals or audio sources.

•To invert the polarity of a trigger or other kind of pulses.

with

•Sine waves hear them scream. –

•Human voices fracture them in pieces with clipping . –as a good ol’ broken tape would do

•Complex audio sources to control and flatten them. –

•Envelopes going to a drum module rectify or fold that decay tail. –

how

Fed an input audio or CV into and take the processed output from ––

The circuit is designed to invert the polarity of any given input.

“Disrupt and Pieces are analog touch controls; they act like potentiometers and they keep the value once the

finger is lifted from the surface.

As it takes time to turn a pot, it takes time to interact with these controls:

bridge with your finger the first line and the center to decrease the value or the center and the last one IIIIII

to increment. A red and a blue LEDs will light up to give visual feedback of the position of the control.

This is a full analogue continuous controldesigned to be an expressive and interactive gateway to decrease ,

the boundaries between the user, the environment and the music-making-devices. ”

DISRUPT: controls how much the output is affected by the waveshaper circuit. At maximum it will fold and

create a total harmonic distortion.

PIECES: the pulse width of the resulting transformed wave.

Both parameters have a dedicated reactive CV input. connected, the touch potentiometer act as an offset of If

the incoming signal.

features

•Clipping and folding analog waveshaper circuit.

•Touch Controls on the amount of effect and PWM.

•Reactive CV inputs on both parameters.

•Inverts the polarity of any given input.

•Works with audio and CV sources.

•Single board design extremely skiff friendly. –

•“hatever” don’t Wpower connector a.k.a. mind the polarity.

specs

•current draw  +12V 35ma, - 30ma 12V

•dimensions  width 4HP, depth mm 18

Demos and build documentation at jolin.tech/getrekt

Product specificaties