Joie i-Base Advance Handleiding

Joie Autostoeltje i-Base Advance

Lees hieronder de đź“– handleiding in het Nederlandse voor Joie i-Base Advance (123 pagina's) in de categorie Autostoeltje. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/123
ECE R129/00
Child height 40cm-85cm/ Child weight≤13kg;
ECE R129/00: C,D
i-Size universal ISOFIX
i-Gemm
infant child restraint
attachment to i-Base Advance
™
DA Brugervejledning
GB Welcome to Joie™
Congratulations on becoming part of the Joie family! We are so excited
to be part of your journey with your little one. While traveling with the
Joie i-Gemm™ infant child restraint you are using a high quality, fully
certified safety i-Size infant child restraint. When used with the i-base or
with i-base Advance, please carefully read this manual and follow each
step to ensure a comfortable ride and best protection for your child.
To use this Joie infant child restraint with the i-Size ISOFIX connections
according to the ECE R129/00 Regulation, your child must meet the fol-
lowing requirements.
Child height 40cm-85cm/ Child weight≤13kg; (approximately 1.5 years
old or under).
To use this infant carrier module with vehicle belt, your child must meet
the following requirements.
Child weight≤13kg/ Child age≤15 months.
i-base Advance
These instructions show the use of the infant carrier module and the
base. This base can also be used with other certain Joie infant carrier
module. Please read all the instructions in this manual before installing
and using the product.
! IMPORTANT: KEEP FOR FUTURE REFERENCE.
PLEASE READ CAREFULLY.
Please keep the instruction manual in the
storage compartment at the bottom of
the base as right figure.
or
Please keep the instruction manual at the
bottom of the soft goods.
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
1
18
24
23
22
25
19
17
20
21
Parts List
Please make sure there are no missing parts. Please contact the
retailer if anything is missing.
Fig. 1.1 Head Support
Fig. 1.2 Seat Pad
Fig. 1.3 Stroller Fix Release
Button A
Fig. 1.4 Side Guide
Fig. 1.5 Infant Insert
Fig. 1.6 Adjustment Webbing
Fig. 1.7 Harness Adjustment
Button
Fig. 1.8 Shoulder Harness
Fig. 1.9 Hood Mount
Fig. 1.10 Hood
Fig. 1.11 Harness Connectors
Fig. 1.12 Harness Buckle
Fig. 1.13 Handle
Fig. 1.14 Handle Button
Fig. 1.15 Rear Guide
Fig. 1.16 Stroller Fix Release
Button B
Fig. 1.17 Rebound Bar
(only use with
iAnchor Advance seat)
Fig. 1.18 Lock-off
Fig. 1.19 ISOFIX Connector
Fig. 1.20 Recline Adjustment
Button
Fig. 1.21 Child Restraint
Release Button
Fig. 1.22 Load Leg Adjustment
Button
Fig. 1.23 Load Leg
Fig. 1.24 Load Leg Indicator
Fig. 1.25 ISOFIX Guides
1 2
WARNING
! Please check before you purchase this infant child restraint to make
sure it can be installed properly in your vehicle.
! NO infant child restraint can guarantee full protection from injury in
an accident. However, proper use of this infant child restraint will
reduce the risk of serious injury or death to your child.
! To use this infant child restraint with the ISOFIX connections ac-
cording to the ECE R129/00 Regulation, your child must meet the
following requirements.
Child height 40cm-85cm/ Child weight≤13kg (approximately 1.5
years old or under).
! To use this infant carrier module with vehicle belt, your child
must meet the following requirements.
Child weight≤13kg/ Child age≤15 months.
! Any straps of infant child restraint should be tightened and not
twisted.
! DO NOT install this infant child restraint without following the in-
structions in this manual or you may put your child at serious risk of
injury or death.
! NEVER leave your child unattended with this infant child restraint.
! DO NOT make any modification to this infant child restraint or use it
along with component parts from other manufacturers.
! DO NOT use this infant child restraint if it has damaged or missing
parts.
! DO NOT have your child in large/oversized clothes because this may
prevent your child from being properly and securely fastened by the
shoulder harness straps and the crotch strap between the legs.
! DO NOT leave this infant child restraint or other items unbelted
or unsecured in your vehicle because an unsecured infant child
restraint can be thrown around and may injure occupants in a sharp
turn, sudden stop, or collision.
! DO NOT place a rear-facing infant child restraint on front seat with
air bag. Death or serious injury may occur. Please reference vehicle
owner’s manual for more information.
WARNING
! NEVER use a second-hand infant child restraint or an infant child
restraint whose history you do not know because it may have struc-
tural damage that compromises your child’s safety.
! NEVER use ropes or any other substitutes to secure infant child
restraint in vehicle or to secure child into infant child restraint.
! DO NOT use this infant child restraint without the soft goods.
! The soft goods should not be replaced with any besides the ones
recommended by the manufacturer. The soft goods constitute an
integral part of the infant child restraint performance.
! DO NOT put anything other than the recommended inner cushions in
this infant child restraint.
! Be sure that the infant child restraint is installed in such a way that
no part of it interferes with movable seats or in the operation of
vehicle doors.
! DO NOT continue to use this infant child restraint after it has suffered
any type of crash, even a minor one. Replace immediately as there
may be invisible, structural damage from the crash.
! Remove this infant carrier module and base from the vehicle seat
when it is not in regular use.
! Consult the distributor for issues concerning maintenance, repair
and part replacement.
! To avoid the risk of falling out, always secure the child using the
child harness when the child is placed in infant carrier module, even
when the infant child restraint is not in the vehicle.
! Before carrying the infant carrier module by hand, ensure that the
child is fastened with the child harness, and that the handle is cor-
rectly locked in a vertical position.
! To avoid serious injury or death, NEVER place infant carrier module
on elevated surface seat with child in it.
! The parts of this infant child restraint should not be lubricated in any
way.


Product specificaties

Merk: Joie
Categorie: Autostoeltje
Model: i-Base Advance
Kleur van het product: Zwart
Gewicht: 6000 g
Breedte: 630 mm
Diepte: 320 mm
Hoogte: 600 mm
Certificering: ECE R129/00
Aanbevolen geslacht: Jongen/meisje
Type product: Baby-autozitje onderstel
Eenvoudig verwijderbaar: Ja
Compatibele autostoelen: i-Anchor® Advance, i-Gemm™

Heb je hulp nodig?

Als je hulp nodig hebt met Joie i-Base Advance stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autostoeltje Joie

Joie

Joie Duallo Handleiding

23 September 2022
Joie

Joie i-Spin 360 E Handleiding

23 September 2022
Joie

Joie Trillo LX Handleiding

23 September 2022
Joie

Joie i-Level Handleiding

23 September 2022
Joie

Joie Transcend Handleiding

23 September 2022
Joie

Joie Traver Shield Handleiding

23 September 2022
Joie

Joie Trillo shield Handleiding

23 September 2022
Joie

Joie i-Spin 360 Handleiding

23 September 2022
Joie

Joie Elevate Handleiding

23 September 2022
Joie

Joie i-Gemm Handleiding

23 September 2022

Handleiding Autostoeltje

Nieuwste handleidingen voor Autostoeltje