JLab JBuds Air Icon Handleiding

JLab Headset JBuds Air Icon

Lees hieronder de 📖 handleiding in het Nederlandse voor JLab JBuds Air Icon (4 pagina's) in de categorie Headset. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

JBUDS AIR ICON

EARBUDS

AUTO-CONNECTING EARBUDS

Press and hold to power ON.both touch sensors 3+ seconds

The Left and Right earbud indicating ready to pair to your device.blinks blue/white

ADDING NEW ADDITIONAL BLUETOOTH DEVICES: /

Turn OFF Bluetooth Turn ON Bluetooth from any previously connected device. from new device.

Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Icon” in new device settings to connect.

FIRST TIME SETUP

CONNECTING BLUETOOTH

Select “JLab JBuds Air Icon” in your device settings.

Voice prompt “Bluetooth connected” followed by will indicate you are connected.solid white lights

Press and hold 3+ seconds

Left Right

Bluetooth

Settings

JLab JBuds Air Icon

We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

YOUR WARRANTY

All warranty claims are subject to JLab Audio

authorization and at our sole discretion. Retain your

proof of purchase to ensure warranty coverage.

Reach out to us at support@jlabaudio.com

or visit jlabaudio.com/contact

jlabaudio.com/register

Product updates How-to tips|

FAQs & more

Match the corresponding

L and R letters on the charging

case for proper charging.

The earbuds will auto power OFF

and start charging.

Blue lights will indicate earbuds

are charging and will turn OFF

when fully charged.

Earbuds will auto power ON and reconnect to

your device once charging case is opened.

RIGHT

EARBUD

LEFT

EARBUD

LEFT

EARBUD

RIGHT

EARBUD

VOLUME DOWN: Single tap

SIRI (iOS) or “OK GOOGLE”

(ANDROID): Double tap

ANSWER: Single tap

HANGUP: Double tap

REJECT INCOMING CALLS:

Press & hold 1+ sec

TRACK BACK: Press & hold 1+ sec

TURN ON: Press & hold 3+ sec

CHANGE EQ: Triple tap

(JBuds Air Icon will cycle 3 EQ settings)

VOLUME UP: Single tap

ANSWER: Single tap

HANGUP: Double tap

REJECT INCOMING CALLS:

Press & hold 1+ sec

PLAY PAUSE: / Double tap

TRACK FORWARD: Press & hold 1+ sec

TURN ON: Press & hold 3+ sec

CHANGE EQ: Triple tap

(JBuds Air Icon will cycle 3 EQ settings)

VOICE PROMPTS

“Ready to Pair”: JBuds Air Icon is

ready to pair to Bluetooth device

“Bluetooth Connected”:

Earbud is connected to device

“Battery Full”: 100-75%

“Battery Medium”: 75-25%

“Low Battery”: Less than 25%

When power decreases to 10%,

“Low Battery” will play

BUTTON FUNCTIONS

Tap either the right or left earbud 3 times for different EQ settings. Voice prompts will indicate EQ settings.

(JBuds Air Icon will cycle 3 EQ settings)

EQUALIZER MODES

JLab SIGNATURE

JLab C3™ signature

sound with amplified

bass and vocals

BALANCED

Even sound with

no additional

enhancements

BASS BOOST

Amplified bass

and sub-bass

CH NARGI G EARBUDS

Connect the JBuds Air Icon to computer

or USB 5V output device.

LEDs pulse white when charging and

turn solid white when fully charged. OR

CH NARGI G CASE

TURN OFF EARBUDS WITHOUT CHARGING CASE:

Enter your Bluetooth device settings and disconnect the JBuds Air Icon. Earbuds will power OFF after 3 minutes.

ECHOES ON CALLS

If you experience microphone echo/call quality with the JBuds Air Icon, make sure the Cush Fin is not blocking the microphone port.

Microphone openMicrophone covered

FITTING

Try all the optional Cush Fins and

ear tips for best fit and proper seal.

The Cush Fin should be aligned by

positioning the contour around the

microphone hole.

Cush Fin™

Ear tip

TROUBLESHOOTING

Instructional videos at: JLABAUDIO.COM/MANUALS

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD

(MANUAL RESET)

Bluetooth

Settings

JLab JBuds Air Icon i

Enter your Bluetooth device settings

and forget the JBuds Air Icon.

Wait 10 seconds and open the

charging case. Wait for Left and

Right to blink blue/white.

You are now ready to pair to your

Bluetooth device.

Open the charging case and keep the

earbuds inside.

Quickly tap 3x on each earbud touch

sensor. They will each blink blue then

power off. Once both are off, close

the charging case.

Bluetooth

Settings

JLab JBuds Air Icon

BLUETOOTH DEVICE DOES

NOT CONNECT / RECONNECT

Enter your Bluetooth device settings

and forget the JBuds Air Icon.

2 Turn OFF then ON Bluetooth.

Bluetooth

Settings

Bluetooth

Settings

JLab JBuds Air Icon i

Open the charging case and

wait for Left and Right

earbuds to blink blue/white.

Select “JLab JBuds Air Icon” in

device settings to reconnect.

Both 3x quickly

Product specificaties

Merk:	JLab
Categorie:	Headset
Model:	JBuds Air Icon
Kleur van het product:	Zwart
Gewicht:	10 g
Internationale veiligheidscode (IP):	IP55
Capaciteit van de accu/batterij:	60 mAh
Bluetooth:	Ja
Continue audio-afspeeltijd:	6 uur
Bluetooth-versie:	5.0
Bluetooth-profielen:	A2DP, AVRCP, HFP, HSP
Ondersteund audioformaat:	AAC, SBC
Connectiviteitstechnologie:	Draadloos
Meegeleverde kabels:	Micro-USB
Snel opladen:	Ja
Volumeregeling:	Knop
Equalizer-instellingen:	Ja
Opbergetui:	Ja
Draagwijze:	In-ear
Aanbevolen gebruik:	Oproepen/muziek
Headset type:	Stereofonisch
Impedantie:	32 Ohm
Positie speakers koptelefoon:	Intraauraal
Frequentiebereik koptelefoon:	20 - 20000 Hz
3,5mm-connector:	Nee
Aansluitbereik:	10 m
Microfoontype:	Ingebouwd
Accu gestuurd:	Ja
Accu/Batterij oplaadtijd:	1.5 uur
Continue audioafspeeltijd (met oplaadstation/opbergdoos):	24 uur
Veiligheidsfunties:	Zweetbestendig
Gevoeligheid koptelefoon:	103 dB
USB-aansluiting:	Ja
2,5mm-connector:	Nee
Extra oordoppen:	Ja
Oplaadspanning:	5 V
Oplaadbron:	USB
USB-connector:	Micro-USB
Diameter van de luidspreker:	8 mm
Soort magneet:	Neodymium
Oplaadcassette:	50 g
Driver type:	Dynamisch
Gevoeligheid microfoon:	-38 dB
Capaciteit oplaadstation:	700 mAh
Levensduur van de batterij (snel opladen):	1 uur
Snelle oplaadtijd:	15 min
Type product:	Headset
Batterijtechnologie:	Lithium-Polymeer (LiPo)
Type batterij:	Ingebouwde accu