JL Audio MLC-RW Handleiding

JL Audio Niet gecategoriseerd MLC-RW

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio MLC-RW (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Thank you for purchasing a JL Audio Marine Lighting

Controller for your sound system.

This product has been designed and manufactured to exacting

standards in order to deliver years of enjoyment. For maximum

performance, we highly recommend that you have your MLC-RW

installed by an authorized JL Audio dealer. Your authorized dealer has

the training, expertise and installation equipment to ensure optimum

performance from this product. Due to the complexity of modern

electrical systems, we do not recommend self-installation unless you

have extensive experience in automotive and marine electrical systems.

Should you decide to install this product yourself, please take the time to

read this manual thoroughly to familiarize yourself with its installation

requirements and setup procedures.

If you have any questions regarding the instructions in this manual or

any aspect of the product’s operation, please contact your authorized

JL Audio dealer for assistance. If you need further assistance, please submit

a request to the JL Audio Technical Support Department at

www.jlaudio.com/support or call (954) 443–1100 during business hours.

OWNER’S MANUAL

Marine Lighting Controller

MLC-RW

2 | JL Audio - MLC-RW Owner’s Manual

FCC Compliance Statement

is equipment has been tested and found

to comply with the limits of Part 15 of the

FCC Rules. ese limits are designed to

provide reasonable protection against harmful

interference in a residential installation. is

equipment generates, uses and can radiate

radio frequency energy and, if not installed in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If

this equipment does cause harmful interference

to radio or television reception, the user is

encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase separation between the equipment

and the receiver.

- Connect the equipment to an outlet on a

circuit dierent from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

Any changes or modications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate

this equipment.

Connections

Safety Considerations

• Install the controller module in a dry, well-

ventilated location that does not interfere with

factory-installed systems. Do not install where

it will be directly exposed to the elements.

• Do not mount this product in an engine

compartment or areas of extreme heat.

Areas exposed to a heater or hot air should

also be avoided.

• Securely mount this product so that it does not

come loose in the event of a collision, sudden

jolt or as a result of repeated vibrations during

normal use.

• Check before drilling to make sure that you will

not be drilling into an exterior panel/hull, fuel

tank, gas/brake line, wiring harness or other

vital system.

• Do not run system wiring outside or underneath

the vehicle/vessel. is is an extremely

dangerous practice, which can result in severe

damage/injury.

• Protect all system wires from sharp edges and

wear by carefully routing them, tying them

down and using grommets and loom where

appropriate. Secure all wiring using cable ties or

wire clamps, as needed.

Panel-Mounting Rotary Encoder

ROTAR Y EN CODER

POWER CONN ECT IONS

+12 VD C* (Ye ll ow)

GRO UN D (Black)

I LLUMI N AT IO N

+Main RGB (W hit e)

–R ed RGB (Red)

–Gree n RGB (Green)

–Blu e RGB (Blue)

Under-Dashboard Mounting Rotary Encoder

Gasket

Threaded Collar

Mounting Bracket

1" Mounting Hole

Gasket

Threaded Collar

* Install a fuse at the +12VDC Power Wire

(Yellow) connection point that is appropriate for

the total current draw of all LED circuits.

Product Description

e MLC-RW is an advanced controller

designed for managing RGB LED lighting circuits.

Outtted with PWM technology and high-

capacity circuitry, the MLC-RW produces up to

30 amps (400 watts) of continuous output to

power modern, multi-LED networks.

All LED functions are easily controlled

with the included rotary encoder or using your

handheld device via built-in WiFi connection.

Note: Wireless functionality requires your

compatible iOS® or Android® device and the

LiteWave ITI app (see WiFi Functionality section

for more info).

e MLC-RW also includes a suite of onboard

safety features, including automatic over-current

and short-circuit protection, as well as voltage and

temperature monitoring.

What Is Included

(1) MLC-RW Control Module

(1) Rotary Encoder

(2) #8 x 1-1/2-inch Phillips-head stainless-steel

screws for control module mounting

(2) #8 x 1/2-inch Phillips-head stainless-steel

screws for rotary encoder mounting

(1) Owner’s manual

WiFi Functionality

e MLC-RW is outtted with built-in WiFi

network capabilities enabling wireless control

using your compatible iOS® or Android® device

running the LiteWave ITI app. (Note: LiteWave

ITI is a third party app available for download

on the App Store and Google Play.) Refer to the

instructions below to connect the MLC-RW with

the LiteWave ITI app.

1. Download the LiteWave ITI app from the

App Store or Google Play.

2. Make sure that the MLC-RW is connected

and powered on.

3. In your device’s WiFi settings, connect your

device to the “LiteWave_xxxx” network

name. (e default password is: password)

4. Launch the app on your device. When

prompted, update your password and install

new rmware, if available.

Control Module Placement & Connection

While the MLC-RW control module can

be mounted in any orientation, its installation

location and distance should be considered

when selecting a mounting position for the rotary

encoder and making connections. Use the two

#8 x 1-1/2-inch phillips-head stainless-steel screws

to mount the control module to a at surface.

Refer to the table below for wire connection info.

Wire Color Connection

Power

Yellow

+12VDC (Install a fuse at this connection

point that is appropriate for the total

current draw of all LED circuits.)

Black GROUND

Illumination

Red Red RGB LED Negative (–)

Green Green RGB LED Negative (–)

Blue Blue RGB LED Negative (–)

White Main RGB LED Positive (+12V)

Rotary Encoder Installation

e rotary encoder uses a threaded-collar

mounting design that can accommodate

installations in at panels up to 0.625 inches

(16 mm) thick. An adaptor bracket is also included

to accommodate under dashboard installations.

Refer to the diagrams on page 2 for your specic

mounting application.

Rotary Encoder Functions

e knob of the rotary encoder is used to

activate and control all functions of the MLC-RW.

Located in the center of the knob is an LED that

will display corresponding changes in color and

brightness of the output. Refer to the table below

for operation and control mode info.

Command Function/Mode

Press & Hold

for 2 seconds Power ON

Press & Hold

for 5 seconds Power OFF

Press & Hold

for 10 seconds WiFi Reset: Restores wifi “password”

Press once to

advance

through

each Mode

Color Spectrum (default): Rotate to scroll colors

Brightness: Rotate to adjust LED intensity

Color Cycle: Rotate to adjust color change rate

Specifications

Operating Voltage 10 - 17.6V DC

Operating Temperature -4 F to +167 F (-20 C to +75 C)

Output Capacity 30 A (continuous)

Auto Protection Modes Over-Current, Short-Circuit

Monitoring Modes Voltage, Temperature

WiFi Band Compatibility B, G, N

Product specificaties

Merk:	JL Audio
Categorie:	Niet gecategoriseerd
Model:	MLC-RW

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio MLC-RW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd JL Audio

JL Audio MediaMaster MM105-HR Handleiding

11 Maart 2024

JL Audio JLINK RX Handleiding

8 Januari 2024

JL Audio Stealthbox SBA-J-JK-FHB Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-D-QDRAM/10W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-GM-C6CONV/8W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-4 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-F-F1502/10W3v3/TN Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-N-350/10W3v3 Handleiding

31 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024