JL Audio 8W2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 8W2 (2 pagina's) in de categorie Auto subwoofer. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
10W2
20.9 Hz
0.281
0.322
2.205
7.58 214.7
0.218 5.5
89.6 dB
51.8 0.0334
N/A
4
125 Watts
12W2
27.8 Hz
0.329
0.351
5.328
5.83 165.1
0.125 3.2
91.8 dB
78.5 0.0506
N/A
4
125 Watts
8W2
36.2 Hz
0.490
0.514
10.704
1.52 43.0
0.188 4.8
87.8 dB
30.7 0.0198
3.65
4
75 Watts
Subwoofer Specifi cations
Fs (free-air resonance):
Qts (total speaker “Q”):
Qes (electrical “Q”):
Qms (mechanical “Q”):
Vas (equivalent compliance):
Xmax (linear excursion one-way):
Effi ciency (1W/1m)*:
Sd (effective piston surface area):
Re (DC resistance):
Znom (nominal impedance):
Pt (continuous thermal power handling):
*Effi ciency (1W/1m) is not an accurate indicator of a subwoofers output capability and should not be used as a
comparison to other subwoofers to determine which one is louder!
ft3liters
in. mm
ft3liters
in. mm
ft3liters
in. mm
Be sure to allow 0.75 inches (19mm) for pole vent clearance on this driver.
Physical Dimensions
Frame Diameter (A):
Mounting Hole Diameter (B):
Mounting Depth (C):
Overall Depth (D):
Magnet Diameter (E):
Displacement:
in. mm
in. mm
in. mm
in. mm
in. mm
ft3liters
AB
C
D
E
in2m2in2m2in2m2
8.25
6.9375
3.5
3.9375
4.5
0.025
209.55
176.21
88.9
100.01
114.3
0.707
8W2 10W2 12W2
Sealed Enclosure
Enclosure dimensions listed are external dimensions which assume the use of 0.75 inch (19mm) thick material. If you are using
0.625 inch (16mm) thick material, subtract 0.25 inches (6.5mm) from each dimension. Do not use material with a thickness of
less than 0.625 inches (16mm).
Enclosure volumes listed are NET internal volumes. Driver displacement, port displacement and brace displacement must be
added to obtain the nal gross volume. The dimensions listed have already taken this into account.
When using two subwoofers in a common enclosure simply double the required volumes and use two of the recommended ports
(when needed). Likewise, when using three subwoofers in a common enclosure simply triple the required volume and number
of ports (when needed).
Ported Enclosure
H
D
W
H
D
W
Normal Recommended Enclosures (single driver)
Port
(inside dia. X length)
Model
Sealed
Enclosure
Ported
Enclosure
8W2
15 x 10 x 24.75
381mm x 254mm x 629mm
2.5 X 4.8
64mm X 122mm
1.50 ft3
width X height X depthVolume (Net Int.)
42.5 l
10W2
17 x 12 x 29
432mm x 305mm x 737mm
3 X 6.3
76mm X 160mm
2.50 ft3
width X height X depthVolume (Net Int.)
70.8 l
12W2
20 x 14 x 28.5
508mm x 356mm x 724mm
4 X 6.1
102mm X 155mm
3.50 ft3
width X height X depthVolume (Net Int.)
99.1 l
Not Available
Not Available
Not Recommended Not Recommended Not Recommended
ft3liters0.045 1.272 ft3liters0.06 1.696
Do NOT use different impedance speakers when using multiple subwoofers!
JL Audio recommends using subwoofers as part of a bi-ampli ed system using high quality satellite speakers like our Evolution line
of coaxial and component speakers. We do not recommend the use of passive crossover components (coils) on subwoofers. These
components may adversely affect the performance of a subwoofer.
When dealing with exceedingly long port lengths, we recommend the use of JL Audios Flex-Port System. The Flex-Port tubing is
exible, allowing it to t in otherwise tight locations. The Port mouths provide not only a convenient method of securing the port,
but a smooth, rounded edge for the port termination as well.
Wired directly to the ampli er:
A single 4 speaker will present a 4 load.
With speakers wired in parallel:
Two 4 speakers will present a 2 load.
With speakers wired in parallel:
Three 4 speakers will present a 1.3 load.


Product specificaties

Merk: JL Audio
Categorie: Auto subwoofer
Model: 8W2

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 8W2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden