JL Audio 12W1v3-4 Handleiding
JL Audio
Auto subwoofer
12W1v3-4
Lees hieronder de đź“– handleiding in het Nederlandse voor JL Audio 12W1v3-4 (4 pagina's) in de categorie Auto subwoofer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
12W1v3-2 / 12W1v3-4 Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer
is a precision loudspeaker which has been engineered to produce the highest quality sub-bass
performance in your vehicle. Authorized JL Audio dealers have extensive technical information
for many different applications of your new speaker. They also have the knowledge, skills and tools
to build a high-quality enclosure that will maximize the performance of your speaker. We highly
recommend that you have your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a
sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound
quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely
tight, but the ported enclosure will produce 3dB more output at the same power if you have the
extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 12 W1v 3 - 2 /12 W1v 3 - 4
SUBWOOFER 12W1v3-2 12W1v3-4
Free Air Resonance (Fs): 26.55 Hz 26.21 Hz
Electrical “Q” (Qes): 0.554 0.535
Mechanical “Q” (Qms): 8.731 8.200
Total Speaker “Q” (Qts): 0.521 0.502
Equivalent Compliance (Vas): 2.544 ft3
72.04 litres
2.706 ft3
76.63 litres
One-way, Linear Excursion (Xmax)*: 0.45 in
11.4 mm
0.45 in
11.4 mm
Efficiency (1W/1m)**: 85.9 dB SPL 86.1 dB SPL
Effective Piston Area (Sd): 81.426 in2
0.0525 m2
81.426 in2
0.0525 m2
DC Resistance (Re): 2.210 ohm 3.915 ohm
Nominal Impedance: 2 ohm 4 ohm
Power Handling (continuous): 300W 300W
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to
other subwoofers to determine which one is “louder” !
A
C
D
B
E
12W1v3 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 12.0 in
300 mm
Overall Diameter (A): 12.50 in
318 mm
Mounting Hole Diameter (B): 11.0625 in
281 mm
Bolt Hole Circle (C): 11.7 in
297 mm
Magnet Diameter (D): 5.25 in
133 mm
Mounting Depth (E): 5.41 in
137 mm
Net Weight: 12.2 lbs
5.5 kg
Driver Displacement: 0.052 ft3
1.47 liters
JL AUDIO 12W1v3-2 / 12W1v3-4
U.S. PATENTS: #5,734,734 #6,501,844 #6,219,431 #D480,709 Other U.S. & Foreign patents pending.
All specifications are subject to change without notice.
D
H
W
H
D
W
SH
SW
SW
EL
SL
“EL” (Port Extension Length):
12W1v3: 17 in. (432 mm)
JL AUDIO 12 W1v 3 - 2 /12 W1v 3 - 4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURES
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)
Fc
(Hz) Qtc
12W1v3-2 1.10 ft3
31.15 litres
16 in x 16 in x 11 in
406 mm x 406 mm x 279 mm 38.99 48.39 0.9496
12W1v3-4 1.10 ft3
31.15 litres
16 in x 16 in x 11 in
406 mm x 406 mm x 279 mm 39.63 48.75 0.9338
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURES
Volume
(net int.)
Enclosure External Dimensions
(Width x Height x Depth)
Slot Port Internal Dimensions
(Slot Width x Slot Height x Slot Length)
Tune to:
(Hz)
F3
(Hz)
12W1v3-2 1.6 ft3
45.3 litres
25 in x 15.5 in x 13 in
635 mm x 394 mm x 330 mm
1.5 in x 14 in x 30.75 in
38 mm x 356 mm x 781 mm 31.79 31.00
12W1v3-4 1.6 ft3
45.3 litres
25 in x 15.5 in x 13 in
635 mm x 394 mm x 330 mm
1.5 in x 14 in x 30.75 in
38 mm x 356 mm x 781 mm 31.79 31.41
!! CAUTION !!
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
• The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using 5/8" (16mm) thick
material, subtract 1/4" (6.5mm) from each dimension.
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
• All enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the final
gross internal volume. All enclosure dimensions listed
have already taken this into account.
• When using two subwoofers in a common
enclosure simply double the required volume and,
in the case of a ported enclosure, use two times the
recommended port(s).
• We recommend the use of this speaker in a
bi-amplified system using high-quality satellite
speakers and amplifiers. We do not recommend
the use of this subwoofer with a passive crossover
(coil), as this type of device will adversely affect
performance.
All specifications are subject to change without notice.
Product specificaties
| Merk: | JL Audio |
| Categorie: | Auto subwoofer |
| Model: | 12W1v3-4 |
Heb je hulp nodig?
Als je hulp nodig hebt met JL Audio 12W1v3-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Auto subwoofer JL Audio
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
24 Juni 2023
Handleiding Auto subwoofer
Nieuwste handleidingen voor Auto subwoofer
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023
19 Oktober 2023