JL Audio 10W6v3 Handleiding

JL Audio Subwoofer 10W6v3

Lees hieronder de đź“– handleiding in het Nederlandse voor JL Audio 10W6v3 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
10W6v3 Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer
is a precision loudspeaker which has been engineered to produce the highest quality sub-bass
performance in your vehicle. Authorized JL Audio dealers have extensive technical information
for many different applications of your new speaker. They also have the knowledge, skills and tools
to build a high-quality enclosure that will maximize the performance of your speaker. We highly
recommend that you have your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a
sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound
quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely
tight, but the ported enclosure will produce 3dB more output at the same power if you have the
extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 10W6v3-D4
SUBWOOFER 10W6v3-D4
Free Air Resonance (Fs): 30.12 Hz
Electrical “Q” (Qes): 0.543
Mechanical “Q” (Qms): 9.228
Total Speaker “Q” 0.513(Qts):
Equivalent Compliance (Vas): 0.821 ft3
23.25 liters
One-way, Linear Excursion
(Xmax)*:
0.75 in
19 mm
Efficiency (1W/1m)**: 82.7 dB SPL
Effective Piston Area (Sd): 49.303 in2
0.0318 m2
DC Resistance (Re)***: 6.452 ohm
Nominal Impedance: Dual 4-ohm
voice coils
Power Handling (continuous): 600 W
A
BE
D
C
10W6v3 SUBWOOFER
PHYSICAL SPECIFICATIONS
Nominal Diameter: 10.0 in
250 mm
Overall Diameter (A): 10.5 in
267 mm
Mounting Hole Diameter (B): 9.02 in
229 mm
Bolt Hole Circle (C): 9.86 in
250 mm
Magnet Diameter (D): 6.3 in
160 mm
Mounting Depth (E): 6.89 in
175 mm
Required Pole-Vent Clearance: 0.50 in
12.5 mm
Net Weight: 20 lbs
9.1 kg
Driver Displacement: 0.078 ft3
2.21 liters
JL AUDIO 10W6v3-D4
U.S. PATENTS: 6,535,613 #6,118,884 #6,219,431 #6,229,902 #6,501,844 • Other U.S. & Foreign Patents Pending
W6v3 Terminal Jumper System
Please note that the W6v3 is a dual voice coil driver.
BOTH voice coils must be connected to the amplifier
(in series or parallel) for the speaker to operate
properly. To accomplish this, each W6v3 features a
pair of main input connection push-terminals and
four voice coil configuration tab terminals. These are
located behind the main input connectors and are
used to interconnect the dual voice coils in one of
two ways: Diagram A shows a series connection
(8Ω nominal impedance per speaker). Diagram B
shows a parallel connection (2Ω nominal impedance
per speaker) and is the way the speaker is configured
at the factory. After verifying that the tabs are
properly configured using the supplied jumper(s),
connect the amplifier’s output wires to the W6v3s
main input push-terminals and install the speaker
into the enclosure.
All specifications are subject to change without notice.
Diagram A: Series Connection (8Ω):
Use one jumper from “VC1–” to “VC2+”
Warning! Failure to properly connect the
configuration tabs will result in no output and
may damage the speaker.
Diagram B: Parallel Connection (2Ω):
Use two jumpers... one from “VC1–” to “VC2–” and
one from “VC1+ to “VC2+”.
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1W/1m) is an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to not
other subwoofers to determine which one is “louder” !
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other
specifications remain the same.
D
H
W
JL AUDIO 10W6v3-D4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)
Fc
(Hz) Qtc
10W6v3-D4 0.55 ft3
15.57 liters
12.50 in. x 12.50 in. x 10.50 in.
318 mm x 318 mm x 267 mm 42.27 47.55 0.8099
All specifications are subject to change without notice.
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
• The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using 5/8" (16mm) thick
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
• Enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the
final gross internal volume. All enclosure dimensions
listed have already taken this into account.
• When using two subwoofers in a common
enclosure simply double the required volume.
• We recommend the use of this speaker in a bi-amplified
system using high-quality satellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type of
device will adversely affect performance.
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
(Width x Height x Depth)
Slot Port Internal Dimensions
( lot lot lot S Width x S Height x S Length)
Tune to:
(Hz)
F3
(Hz)
10W6v3-D4 0.75 ft3
21.2 liters
21.50 in. x 12.375 in. x 11.125 in.
546 mm x 314 mm x 282 mm
1.375 in. x 10.875 in. x 30.40 in.
35 mm x 275 mm x 772 mm 39 33
“EL” (Port Extension Length): 16.5 in (419 mm)

Product specificaties

Merk: JL Audio
Categorie: Subwoofer
Model: 10W6v3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 10W6v3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer JL Audio

JL Audio

JL Audio Fathom ICS-SYS-208 Handleiding

8 Januari 2024
JL Audio

JL Audio Fathom ICS-SYS-108 Handleiding

8 Januari 2024
JL Audio

JL Audio Fathom IWS-SYS-208 Handleiding

8 Januari 2024
JL Audio

JL Audio Stealthbox SB-B-X5E70/10W3v3 Handleiding

31 Augustus 2023
JL Audio

JL Audio Stealthbox SB-SC-TCG2/10W3v3 Handleiding

31 Augustus 2023
JL Audio

JL Audio Stealthbox SB-F-EXPL3/10W3v3 Handleiding

31 Augustus 2023
JL Audio

JL Audio M6-8IB-L Handleiding

5 Juli 2023
JL Audio

JL Audio M6-10IB-L Handleiding

3 Juli 2023
JL Audio

JL Audio Fathom SA-600W Handleiding

6 Juni 2023
JL Audio

JL Audio Fathom f110 Handleiding

28 Mei 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

RCF

RCF S 19 Handleiding

10 April 2024
RCF

RCF S 29 Handleiding

10 April 2024
KEF

KEF KC92 Handleiding

6 April 2024
Klipsch

Klipsch Reference Premiere RP-1200SW Handleiding

3 April 2024
Klipsch

Klipsch Reference Premiere RP-1000SW Handleiding

3 April 2024
Velodyne

Velodyne Deep Waves 10 Handleiding

27 Maart 2024
Klipsch

Klipsch PRO-1000SW Handleiding

27 Maart 2024
Totem

Totem KIN Sub Handleiding

27 Maart 2024
Velodyne

Velodyne Deep Waves 12 Handleiding

27 Maart 2024
Kanto

Kanto SUB8V Handleiding

27 Maart 2024