JETI JEX-MULI6S-M Handleiding

JETI Radiografisch bestuurbaar speelgoed JEX-MULI6S-M

Lees hieronder de 📖 handleiding in het Nederlandse voor JETI JEX-MULI6S-M (12 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

INSTRUCTIONS FOR USING

SENSOR I S ODULE MUL 6 M

Producer JETI model s.r.o 14.12.2017

Instructions manual: MULi6s Module

CONTENTS

1. DESCRIPTION................................................................................................................................3

2. SENSOR CONNECTION MULI6S MODULE..............................................................................3

3. MULi6s Module SENSOR CONNECTION OPTION....................................................................6

3.1. Jetibox...........................................................................................................................................................6

3.2. Receiver.........................................................................................................................................................6

4. MENU JETIBOX.............................................................................................................................7

4.1. Actual values.................................................................................................................................................7

4.2. Min / Max......................................................................................................................................................8

4.3. Settings..........................................................................................................................................................8

4.4. Alarms...........................................................................................................................................................8

4.5. Service...........................................................................................................................................................8

5. CONFIGURATION USING A DC / DS TRANSMITTER............................................................9

5.1. Telemetry.......................................................................................................................................................9

5.2. Telemetry Min / Max..................................................................................................................................10

6. FIRMWARE UPDATE..................................................................................................................10

7. SPECIFICATIONS........................................................................................................................11

8. GUARANTEE................................................................................................................................11

Instructions manual: MULi6s Module

1. Description:

The MULi6s Module is a sensor designed to monitor the Li-XX battery voltage, which measures the

voltage of each battery cell via the balance connector. It allows you to monitor the voltage of up to

6 Li-XX cells per module. The individual MULi6s modules can be serialized and can be connected to

up to 5 modules. The MULi6s Module sensor monitors the voltage of each battery cell with its history

(minimum, maximum), the total battery voltage, the voltage difference between the strongest and the

weakest cells, and the sensor is able to alert the operator to exceed the set parameters by means of alarms.

Sensor information is transmitted by the Duplex system to the operator.

The Duplex system uses a 2.4GHz bandwidth to communicate, not only to the model, but also to the

transmitter. The telemetry data acquired during operation is transmitted in real time and the current state

of the measured quantities can be displayed on the JETIBOX LCD or DC / DS transmitters.

2. Sensor connection Muli6s Module:

Notice! Try to follow the following connection procedure:

1. Connect the MULi6s Module sensor to the Li-XX battery connector.

(Make sure the connector polarity is correct!)

2. Connect the MULi6s Module sensor to the receiver / Expander via the JR connector

3. Connect the negative pole (-) of the battery to the controller / BEC

4. Connect the positive pole (+) of the battery to the controller / BEC

Sensor MULi6s Module connects the battery module to the battery via the balance connector. The

balance connector must be wired as shown below. When the monitored battery is connected to the sensor,

identification of the number of cells is started and, after 3 seconds, the sensor locks into the number of

cells detected. The sensor is always locked until it is switched off. Re-connecting the sensors to the power

supply will lead to a new identification process. If the sensor is locked, any change detected in the

number of connected cells will cause a fault. The fault is indicated by a red LED. The change can also be

detected by means of set alarms directly in the sensor via the Jetibox (see chapter Alarms) or the alarms

set in the DC / DS transmitter (see Chapter Configuration using the DC / DS transmitter).

Product specificaties

Merk:	JETI
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	JEX-MULI6S-M
Kleur van het product:	Zwart
Gewicht:	6 g
Breedte:	32 mm
Diepte:	18 mm
Hoogte:	5 mm
Soort:	Radio-Controlled (RC) Model Parts
Certificering:	CE
Correct gebruik:	Universeel
Merkcompatibiliteit:	JETI
Spanning:	4 - 8.4 V
Type product:	Sensor
Werkingsstroom (@4,8 V):	25 mA