JETI BOX mini Handleiding

JETI Radiografisch bestuurbaar speelgoed BOX mini

Lees hieronder de 📖 handleiding in het Nederlandse voor JETI BOX mini (2 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

JETIBOX MINI Manual

The JETIBOX mini display is used for data readout and parameter adjustment of hooked up

equipment. Due to small size it can be easily ﬁxed to the transmitter and its clearly arranged

backlighted display enables excellent readability at any weather coditions. Equipment designated by

the JETIBOX COMPATIBLE label is JETIBOX mini compatible.

Description

The dominant part of the JETIBOX mini is the two line LCD display with background lighting. The

JETIBOX mini oﬀers two communication inputs. The input for a permanent connection to the

transmitter module is implemented via a triple core cable with JR connector („Input Tx“). The input

labelled by „Ext.“ serves as transient connector of eqipment which has to be set up or supervised as

for instance receivers, sensors, controllers a. s. o..

There are six functional push buttons arranged at the box circumference. By pushing the button with

the label „Ext./Tx“ you may choose the active input. After pushing this button there appears a notice

„ACTIVATED INPUT“ in the display and the corresponding input becomes activated. The button

labelled „Backlighting“ switches lighting of the sreen background on and oﬀ. After pushing the

button there appears a message „BACKLIGHT ON“ in the display – backlighting is on, or

„BACKLIGHT OFF“ – backlighting is oﬀ. In order to reduce current consumption of the JETIBOX

mini and on the contrary to increase operating time of the transmitter battery backlighting of the

display must be activated everytime after switching on, otherways it will stay switched oﬀ. With the

remaining four buttons you may navigate through the menu of the connected equipment

corresponding to the equipment manual.

Voltage supply

The allowed JETIBOX mini voltage supply of 5 to 12V is only applicable via „Input Tx“. The

equipment connected to input „Ext.“ must not be connected to an external supply. An exception

comprise OPTO controllers. If the Jetibox obtains its current supply via the transmitter module we do

not recommend continual operation of the equipment at the input „Ext.“.

Assembly

The JETIBOX mini has been designed with the intention of attaching it directly to panel transmitters

comprising mounting positions for auxiliary switches (for inst.: Graupner MC-18, Futaba FC-16, a. s.

o.). The JETIBOX mini package contains an assembly set with the following hardware: 2x bolts, 2x

nuts, 1x plastic JR-connector body. Insert the bolts with square heads from the backside into holes

provided in the JETIBOX mini and adjust their spacing according to the hole spacing of the

transmitter (available openings for auxiliary switches). Stick the triple core cable through one of the

available auxiliary switch assembly hole and shift the JETIBOX mini with bolts into position. Put

nuts on the bolts and ﬁnish attachment of the JETIBOX mini to the transmitter by tightening them

properly. Insert ends of the triple core cable into the plastic JR-connector body corresponding to the

sequence shown in the picture below. Please pay attention to the correct sequence of the cables. Plug-

in the completed connector into the Duplex transmitter module.

Technical Data

Technical Parameter JETIBOX mini

Dimensions 75x31x16

Weight 42g

Voltage supply 5-12V

Current consumption without/

with backlight 12/25mA

Warranty

For the product we grant a warranty of 24 months from the day of purchase under the assumption that

it has been operated in conformity with these instructions at recommended voltages and that it has not been

damaged mechanically. Warranty and post warranty service is provided by the manufacturer.

We wish you sucessful ﬂying with the products of: JETI model s.r.o. P íbor, řwww.jetimodel.cz

Product specificaties

Merk:	JETI
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	BOX mini
Ingebouwd display:	Ja
Gewicht:	42 g
Breedte:	75 mm
Diepte:	31 mm
Hoogte:	16 mm
Soort:	Radio-Controlled (RC) Model Accessories & Supplies
Type product:	Programmeringsbox
Type beeldscherm:	LCD