JBL OnBeat Venue LT Handleiding

JBL Speakerdocks OnBeat Venue LT

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL OnBeat Venue LT (4 pagina's) in de categorie Speakerdocks. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Quick Setup Guide

JBL OnBeat™

VenUe Lt

WeLcOme

Thank you for purchasing the JBL OnBeat

™ Venue LT speaker dock. This quick setup

guide will show you how to connect and set up your dock.

cOnnectIOnS

1. If you are going to use your OnBeat Venue LT with another audio source, plug one end of

a 3.5mm (1/8") stereo cable (not supplied) into the OnBeat Venue LT’s Aux In connector,

and plug the other end into the audio source’s audio out or headphone out connector.

2. Plug the OnBeat Venue LT’s power supply into the Power connector on the unit and into

a working AC power outlet. The OnBeat Venue LT will automatically turn on and go into

the Bluetooth pairing mode (the Bluetooth LED will be flashing blue).

Power

Connector

Aux

Input

PLACEMENT

Place OnBeat Venue LT on a shelf or table with the rear of its enclosure is at least 3"

(76mm) away from a wall or other surface to allow the bass ports to operate properly.

CONTROLS AND INDICATORS

Bass Boost

Button

Movie

Button

Aux Input

LED

Bluetooth

LED

Volume Up/Down

Buttons

Docking Slide (open)

LT Docking Connector

Power

Button

Dock Input

LED

Source

Button

Bass Boost button: Press this button to enhance the bass performance. The button’s

LED will illuminate when Bass Boost is on.

Movie button: Press this button to activate the Movie EQ mode, which creates an

extra-wide sound field to compliment films and other video media. The button’s LED will

illuminate when the Movie mode is on.

Source button: Press this button to cycle through the audio sources: , docked Bluetooth

device and Aux Input. The input LED for the active source will illuminate.

• If you begin to stream audio from a paired Bluetooth device or play audio from a device

connected to the dock while another source is playing, the OnBeat Venue LT will

automatically switch to the new source.

Aux Input LED: This LED illuminates when the Aux Input is the active source.

Dock Input LED: This LED illuminates when the docked device is the active source.

Bluetooth LED: This LED flashes blue when the OnBeat Venue LT is in the Bluetooth

pairing mode, and turns solid blue when it has successfully paired with a device.Bluetooth

Power button: When the OnBeat Venue LT is on, press the Power button to put it into the

standby mode. The button’s LED will illuminate solid amber when the unit is in standby.

When the OnBeat Venue LT is in standby, press the Power button to turn it on. The button’s

LED will illuminate solid white when the unit is on.

www.jbl.com

When the OnBeat Venue LT is in the standby mode it will automatically turn on when it

detects audio playing from a -connected device or from a docked device.Bluetooth

When the OnBeat Venue LT is on, it will automatically enter the standby mode after 10

minutes of inactivity (no audio input and no user-control operation).

Note: When the OnBeat Venue LT enters the standby mode it will also bring a docked

device into standby mode.

Volume Up/Down buttons: Press these buttons to raise and lower the OnBeat Venue LT’s

volume. To mute the sound, press both buttons at the same time. (The Power button LED

will flash white when the sound is muted.) To restore the sound press either Volume button

or both buttons together.

Docking slide: Press in on the JBL logo to open the docking slide and pull the slide all

the way open.

Docking connector: Place your device onto the docking slide so that it is firmly seated

on the docking connector.

Made for

iPhone 5

iPod nano 7th generation

iPod touch 5th generation

Note: We recommend that you disable the”Shake to Shuffle” feature on your iPod nano,

iPod touch and iPhone before docking the device on the OnBeat Venue LT.

BLUETOOTH WIReLeSS StReamInG

To wirelessly stream audio to the OnBeat Venue LT from a -enabled device: Bluetooth

1. If the OnBeat Venue LT’s LED is not flashing blue, press the Source button Bluetooth

until the LED begins flashing blue.Bluetooth

2. Place the -capable device in the pairing mode. Use the device’s Bluetooth Bluetooth

pairing menu to pair with OnBeat Venue LT. (If the device requires a pairing code, use

0000.)

3. When OnBeat Venue LT’s LED illuminates blue continually, it is paired with Bluetooth

the device and you can stream audio via from the device to the OnBeat Bluetooth

Venue LT.

To disconnect the device, press and hold the Source button. To pair OnBeat Venue Bluetooth

LT with a different -enabled device, repeat Steps 2 and 3 with the new device.Bluetooth

Product specificaties

Merk:	JBL
Categorie:	Speakerdocks
Model:	OnBeat Venue LT
Kleur van het product:	Zwart
Breedte:	415 mm
Diepte:	138 mm
Hoogte:	130 mm
Gebruikershandleiding:	Ja
Bluetooth:	Ja
Type stroombron:	AC
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Indicatielampje:	Ja
Gemiddeld vermogen:	30 W
Stroomverbruik (in standby):	0.25 W
Volumeregeling:	Digitaal
FM-radio:	Nee
Aansluiting voor netstroomadapter:	Ja
Uitgangsvermogen:	12V, 2A
Impedantie:	8 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Compatibele producten:	iPhone 5\r\niPad\r\niPad mini\r\niPod touch
Signaal/ruis-verhouding:	85 dB
AUX ingang:	Ja
Apple docking-compatibiliteit:	iPad, iPhone, iPod
Ingebouwde lader:	Ja
Regeling van bass-niveau:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	24 W