J. Rockett Audio Designs Tim Pierce Handleiding

Bekijk gratis de handleiding van J. Rockett Audio Designs Tim Pierce (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over J. Rockett Audio Designs Tim Pierce of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Controls

!Drive: Controls the level of grit and/or overdrive f

grit/overdrive when cascaded with the boo

!Level: Controls the volume for the OD side and contributes to the volume control when

cascaded with the boost side.

!Bass: Controls the bass and/or fatness of the OD side or contributes to the bass and/or

fatness when cascaded with the boost side.

!Tone: Controls the brightness and/or presence of the OD side or contributes to the

brightness and/or presence when cascaded with the boost side.

!P. Amp Switch: Engages the “power amp” only or cascades it with the OD side.

!P. Amp Knob: Controls the volume of the boost or contributes to the output when cascaded with the

OD side.

!On/Off: Engages the pedal.

NOTE: The power amp section was created to emulate the 5881 servo tube found in the Naylor SD60.

Even if you engage the “power amp” section at unity volume, it will add a certain amp-like fatness to your

overall sound. You can also use it as a solo boost as well.

Power Supply

All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or a single 9 volt

battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage on the outer sleeve. Using an

external power supply will automatically disconnect the battery. Disconnect the input jack to preserve battery

life when not in use or when not used with an appropriate, external power supply.

J. Rockett

J. Rockett

J. Rockett

J. RockettJ. Rockett Audio Designs

Audio Designs

Audio Designs

Audio Designs Audio Designs

2.1mm x 5.5 mm tip/negative plug

Product specificaties