IOTAVX NP3 Handleiding

IOTAVX Receiver NP3

Bekijk gratis de handleiding van IOTAVX NP3 (9 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 4.3 sterren uit 24 reviews. Heb je een vraag over IOTAVX NP3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/9

NP3

User Manual

Version 1.1

SAFETY INSTRUCTIONS

1. Read this user manual.

2. Keep this user manual.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Only clean with a dry cloth.

7. Do not block any ventilation openings. Only operate the device in accordance with the

manufacturer's instructions.

8. Do not place the device near any heat sources such as radiators, heaters, stoves, or other

devices (including amplifiers) that generate heat.

9. Make sure that the power cord is not pinched, especially at power outlets and where it

emerges from the device.

10. Use only accessories specified by the manufacturer.

11. Only to be used in combination with the stand, tripod, bracket or table specified by the

manufacturer or sold with the device. If a caster is used, use caution when the cart /

equipment combination moving to avoid injury from tipping over.

12. Pull out the power plug during lightning storms or when unused for long periods.

13. Leave all maintenance work to qualified service personnel. Maintenance is required when the

device has been damaged in any way, e.g. For example, if the power cord or plug has been

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate normally, or has been dropped.

14. For information on the power supply, see the manufacturer's operating instructions. Note that

different operating voltages may require the use of different power cables and / or mounting

plugs.

15. Do not install the device in an unventilated rack.

16. The user should not attempt to service the device beyond what is described in the operating

instructions. All other maintenance work should be referred to qualified service personnel.

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to part 15 of the FCC rules. These limit values are intended to provide adequate protection

against harmful interference in a residential complex. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio or television reception.

This can be determined by switching the device off and on. The user is prompted to correct the

interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and the receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

● Contact the dealer or an experienced radio / TV technician.

RECYCLING IN COUNTRIES OF THE EUROPEAN UNION

This symbol on the product or on the packaging means that your electrical and

electronic equipment at the end of its life should be disposed of separately from your

household waste. There are separate collection systems for recycling in the EU. For

more information, please contact the local government agency or the dealer where you

purchased the product.

WARNING

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

NOTICE: To avoid the risk of electric shock, never remove the cover (or

back cover). There are no user serviceable parts inside. Contact

qualified service personnel.

THE LIGHTNING SYMBOLalert with an arrow symbol is intended to the

user to the presence of an uninsulated “dangerous voltage” within the

product housing which may be of sufficient strength to represent the risk

of electric shock to persons.

Product specificaties

Merk:	IOTAVX
Categorie:	Receiver
Model:	NP3
Soort bediening:	Buttons, Rotary
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	6300 g
Breedte:	435 mm
Diepte:	240 mm
Hoogte:	59 mm
Bluetooth:	Ja
Land van herkomst:	China
Aantal Ethernet LAN (RJ-45)-poorten:	1
Stroomverbruik (in standby):	0.5 W
Aantal USB-aansluitingen:	2
Digitale audio, optische uitgang:	1
Aantal per verpakking:	1 stuk(s)
Afstandsbediening inbegrepen:	Ja
Digitale audio-ingang (coax):	1
Voeding, voltage ingang:	115 - 230 V
Ingangsfrequentie voeding:	50/60 Hz
Audio RCA-uitgangen:	1
USB-poorttype:	USB Type-A/USB Type-B