Intermatic WP2000 Handleiding

Bekijk gratis de handleiding van Intermatic WP2000 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Intermatic WP2000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WP2000 A REMOTE LOCATION MULTI-PURPOSE POST

This unit (weatherproof outlet box & cover) can be used outdoors or in wet locations

(protects receptacles and timers while in use for unattended applications). It is cCSAus Certified,

TYPE 3R rated and meets National Electrical Code requirements.

Contents

The following items are included:

•Weatherproofcover&housing

•Basecover

•Toggle,round,GFCIandduplexinserts

•Baggiewithmtg.hardware&reducerbushings.

Installation Instructions

1. Determine number and size of PVC connections to be

made to the base of the Multi-Purpose post.

2. Use provided plugs to cap any entrance ports on the

base that will not be used ().DIAGRAM A

3. Use appropriate PVC reducers and secure to the base

where needed. ( for reducer orientation)DIAGRAM B

4. Secure any reducers and/or plugs with PVC glue.

5. Mount and secure base on PVC feeders with PVC glue.

6. Attach ground wire to ground bar ()DIAGRAM D

7. Attach Multi-Purpose post body to base using the four (4)

screws provided ()DIAGRAM C

Installation Instructions for use with wiring device only

8. Install selected wiring device to post according

to device manufacturer’s instructions.

9. Install selected insert over device (). Select the right insert for the application. If DIAGRAM E

you need to remove the knockouts on the round insert, grab them from the back with pliers

and pry down until they break free. Using round insert, knock out the appropriate hole size.

Installation Instructions for Optional Timer:

10.SelecttheIntermaticPB912M10RorPB313KTimer(DIAGRAM F)

11. Remove blank cover from top of Multi-Purpose post ()DIAGRAM F

12.FeedselectedtimerthroughopenbaseofMulti-Purposepostandmountusing

screws provided ()DIAGRAM F

13. Attach Multi-Purpose post body to base using the four (4) screws provided (DIAGRAM C)

14.Wireusinginstallationinstructionsprovidedwithtimer

Installations Instructions for Optional Photo Control

15.SelectanIntermaticK40seriesPhotoControl

16. Determine hole size needed for mounting ()DIAGRAM G

17. Locate drill pattern on back of Multi-Purpose post and drill required outlet

18. Mount Photo Control in outlet port.

19. Attach Multi-Purpose post body to base using the four (4) screws provided ()DIAGRAM C

20.WireaccordingtoinstallationinstructionsprovidedwithPhotoControl.

Installation Tips:

21. Optional Timer and/or Photo Controls should be mounted to Multi-Purpose post body prior

to mounting front device attaching body to bottom mounting plate.

22. Optional Timer and/or Photo Control wiring connections should be performed after

Multi-Purpose post body is attached to bottom mounting plate.

Limited One Year Warranty

If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is

extendedtotheoriginalhouseholdpurchaseronlyandisnottransferable.Thiswarrantydoesnotapplyto:(a)damagetounitscausedbyaccident,droppingorabuseinhandling,actsofGodoranynegligent

use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product;

(e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial

installation costs, removal costs, or reinstallation costs.

INTERMATICINCORPORATEDWILLNOTBELIABLEFORINCIDENTALORCONSEQUENTIALDAMAGES.SOMESTATESDONOTALLOWTHEEXCLUSIONORLIMITATIONOFINCIDENTALOR

CONSEQUENTIALDAMAGES,SOTHEABOVELIMITATIONOREXCLUSIONMAYNOTAPPLYTOYOU.THISWARRANTYISINLIEUOFALLOTHEREXPRESSORIMPLIEDWARRANTIES.ALLIMPLIED

WARRANTIES,INCLUDINGTHEWARRANTYOFMERCHANTABILITYANDTHEWARRANTYOFFITNESSFORAPARTICULARPURPOSE,AREHEREBYMODIFIEDTOEXISTONLYASCONTAINEDINTHIS

LIMITEDWARRANTY,ANDSHALLBEOFTHESAMEDURATIONASTHEWARRANTYPERIODSTATEDABOVE.SOMESTATESDONOTALLOWLIMITATIONSONTHEDURATIONOFANIMPLIEDWARRANTY,

SOTHEABOVELIMITATIONMAYNOTAPPLYTOYOU.

This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase, postage prepaid to the authorized

servicecenterlistedbelow.Thiswarrantyismadeby:IntermaticIncorporated/AfterSalesService/7777WinnRd.,SpringGrove,Illinois60081-9698/815-675-7000http://www.intermatic.com Please be sure to

wrap the product securely to avoid shipping damage.

INTERMATIC INCORPORATED

SPRING GROVE, ILLINOIS 60081-9698

158WP12545

BASE

CAP UNUSED

HOLES WITH

PLUGS

DIAGRAM A

DIAGRAM E

DIAGRAM F

DIAGRAM G

1” PIPE

INSTALL

DIRECTLY

INTO

BASE

FIRST INSTALL

REDUCER BUSHING

INTO BASE INSTALL

1/2 PIPE TO STOP

1/2” PIPE

3/4” PIPE

FIRST INSTALL

REDUCER BREAK OFF

STOP AND INSTALL 3/4 PIPE

BREAK OFF STOP

BASE

1/2” PIPE STOP

DIAGRAM B

DIAGRAM C

SCREW (4)

HOUSING

BASE

KNOCKOUT REMOVAL

HOUSING

HOUSING

REMOVE

COVER

PB313EK TIMER

PB912M10R

TIMER

MOUNTING

SCREWS

DRILL HOLE

TO MOUNT

PHOTO CONTROL

K40XX

PHOTO CONTROL

DIAGRAM D

GROUND BAR

GROUND WIRE

Product specificaties