Intermatic 178GR10K-1 Handleiding
Pagina's 10 Engels Niet gecategoriseerd
Bekijk de handleiding van Intermatic 178GR10K-1 gratis online of download de PDF. 19 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Spring Grove, Illinois 60081
www.intermatic.com
Thermistor Probe Kit
DDSX / DDFM Thermistor Probe Installation
SAFETY SECTION
WARNING – Risk of Fire or Electrical Shock
• Disconnect the power at the circuit breaker(s) or disconnect the switch(es)
before installing or servicing.
• More than one circuit breaker or disconnect switch may be required to
de-energize the equipment before servicing.
• Installation and/or wiring must be in accordance with the national and local
electrical code requirements.
• Use #18-14 AWG - COPPER conductors ONLY.
• Keep the enclosure door closed at all times when not servicing, if applicable.
• Replace the dead front after service or installation, if applicable.
• Only use the Intermatic
®
Thermistor Probe Kit supplied for the DDSX or DDT40
models. The probe connection(s) to the DDSX control are NOT an isolated Class
2 circuit.
AVERTISSEMENT – Risque d’incendie ou de choc électrique
• Utiliser des fils n° 18 à 14 AWG - Conducteurs en CUIVRE UNIQUEMENT.
NOTICE
• Rotate the timer dial clockwise only, rotating counter-clockwise will damage the
timer within installed control.
• Do not move the clock hands on the timer within installed control. Moving the
clock hands manually may damage the timer.
• The thermistor wire may be extended up to 400 ft (122 m) using field-supplied
wiring between the DDSX control and the thermistor probe location.
• This product is only intended to be used with the DDSX and DDT40 model series.
All trademarks are the property of their respective owners.
PRODUCT DESCRIPTION
The thermistor probe kit allows you to add additional probes to your existing adaptive defrost control. Up to four thermistor
probes may be added to monitor multiple evaporator coils. To order additional thermistor probe kits (for example, to connect
multiple evaporators to one control), use part number 178GR10K-1.
Thermistor Probe Contents Part Number 178GR10K-1–
The kit includes:
• One thermistor probe, with clip
• One input lead
• Four wire connectors
FIG. 1. Thermistor Probe Kit Contents
Product specificaties
| Merk: | Intermatic |
| Categorie: | Niet gecategoriseerd |
| Model: | 178GR10K-1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Intermatic 178GR10K-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Intermatic
Intermatic T103PC Handleiding Intermatic T103 Handleiding Intermatic T101PC Handleiding Intermatic 2T2500GA Handleiding Intermatic EI500WC Handleiding Intermatic ET9232 Handleiding Intermatic EJ600 Handleiding Intermatic ET9250 Handleiding