Intellijel Planar 2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Intellijel Planar 2 (39 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/39
 
Planar2 Manual
Planar2 Manual
Multi-Axis Vector Controller & Recorder
Manual Revision: 2018.08.08
 
Planar
2
Manual
 
Table of tentsCon
Overview
Features
A Cornucopia of Control
Installation
Before Your Start
Powering Your Module
Front Panel
Inputs
Outputs
Controls
X/Y Control
GATE Generator
Quad Functions
Manual Quad Crossfader
Crossfading With Fewer Than Four Inputs
Quad Panner
Quad Router
Four Quadrant CV Generator
CV Gesture Recorder
Record & Play Joystick Movements and Gates without Metric Constraint
Syncing Record & Playback to an External Trigger
Using CV Inputs
Cartesian Automation
Polar Automation
Scan Automation
CV Automation Example
Calibration
Technical Specifications
Page 1
 
Planar
2
Manual
 
Overview
With its smoothly responsive precision joystick, Planar2 facilitates hands-on vector control of two
entirely independent sets of outputs (quadrants A-D, and axis X/Y), plus the ability to capture
and playback your gestures. Recording your joystick movements enables the creation of organic
and complex envelopes, wild and wobbly LFOs, or extended sonic evolutions. It mixes, morphs,
routes and pans audio inputs; triggers gates; outputs control voltages and is itself,
CV-controllable. Planar2 puts the ‘joy’ back in ‘joystick,’ and the ‘fun’ back in ‘function generator.’
Its multitasking and tactile interface makes it a flexible and unique control device, no matter
what your musical genre.
Features
Vector control of two independent sets of outputs: one quadrant-based (outputs A, B, C,
D) and one dual-axis based (outputs X and Y).
X/Y Controller: two-axis CV generator sends either unipolar (0V to +10V) or bipolar (-5V
to +5V) signal out the X and Y outputs.
Four Quadrant Controller: With nothing connected to inputs A-D, outputs A-D become
joystick-controlled individual unipolar (0V to +10V) control voltage sources.
Quad mixing & crossfading: Vector mixing and crossfading of four independent inputs (A,
B, C, D) to either individual outputs or the mixed output.
Quad panning: connect a mono source to Input A and use the joystick to pan it to any of
the four outputs. Connect a stereo signal to Inputs A and C and pan it forward and
backward in quadraphonic space.
Quad routing: Send audio to Input A and patch outputs A-D to four different processors
(i.e.VCF, wavefolder, delay, etc.), then use the joystick to dynamically route the signal
through the different effects.
Gate Generator: Generate gates either manually (by pressing the Manual Gate button)
or automatically whenever the joystick is in motion.
CV Gesture Recorder: Record joystick motions (including gates) to play back either as
1-shot complex function generators or as looped, LFO-like functions. Start time and
length can sync to an external trigger, and punch-in/out recording is supported.
External CV Inputs: In addition to its built-in joystick, Planar 2 has two CV inputs, which
allows external CV control of quadrant outputs A-D and axis outputs X/Y. A mode switch
alters how CV affects these outputs, allowing for some advanced automation techniques
(such as circular and spinning motions) that would otherwise be difficult to automate.
Page 2


Product specificaties

Merk: Intellijel
Categorie: Niet gecategoriseerd
Model: Planar 2

Heb je hulp nodig?

Als je hulp nodig hebt met Intellijel Planar 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Intellijel

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd