Indesit Slimline DI9E 2B10 UK Handleiding

Indesit Vaatwasser Slimline DI9E 2B10 UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit Slimline DI9E 2B10 UK (8 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EN
1
APPLIANCE
1. Upper rack
2. Foldable aps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel
1. ON-OFF / Reset button with indicator light
2. Program selection button
3. Program indicator lights
4. START/Pause button with indicator light
DAILY REFERENCE
GUIDE
CONTROL PANEL
PRODUCT DESCRIPTION
1 2 3 4
0000 000 00000
Service:
1
2
3
4
5
6
7
98
10
11
12
PLEASE SCAN THE QR CODE
ON YOUR APPLIANCE IN ORDER
TO HAVE MORE DETAILED
INFORMATION
THANK YOU FOR BUYING AN PRODUCT. INDESIT
In order to receive a more complete assistance, please
register your appliance on: www.indesit.com/register
Before using the appliance carefully read Safety Instruc-
tions guide.
2
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the retaining
elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes
and on the machine’s functional components.
• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher (see Prod-
uct Description) and must be lled when the green oat on the cap of the
salt reservoir is no longer visible..
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2. Only the rst time you do this: ll the salt
reservoir with water.
3. Position the funnel (see gure) and ll the salt
reservoir right up to its edge (approximately 1
kg); it is not unusual for a little water to leak out.
4. Remove the funnel and wipe any salt residue
away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the wa-
ter softener beyond repair).
Whenever you need to add salt, it is mandatory to complete the
procedure before the beginning of the washing cycle to avoid corrosion.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential that
the water hardness setting is based on the actual water hardness in your
house. This information can be obtained from your local water supplier.
The factory sets the default value for the water hardness
• Switch on the appliance by pressing the button.ON/OFF
• Switch o the appliance by pressing the button.ON/OFF
• Hold down button for 5 seconds, until you hear a beep.P
• Switch on the appliance by pressing the button.ON/OFF
• The program indicator light of the current set level ashes.
• Press button to select the desired hardness level P(see WATER
HARDNESS TABLE).
Water Hardness Table
Level
°dH
German
degrees
°fH
French degrees
°Clark
English degrees
1 Soft 0 - 6 0 - 10 0 - 7
2 Medium 7 - 11 11 - 20 8 - 14
3 Average 12 - 16 21 - 29 15 - 20
4 Hard 17 - 34 30 - 60 21 - 42
5Very
hard 35 - 50 61 - 90 43 - 62
• Switch o the appliance by pressing the button.ON/OFF
Setting is complete!
As soon as this procedure is complete, run a program without loading.
Only use salt that has been specically designed for dishwashers.
If the salt container is not lled, the water softener and the heating
element may be damaged as a result of limescale accumulation.
Using of Salt is recommended with any type of dishwasher detergent.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser shouldA
be lled when when the dark optical indicator on the dispenser door C
becomes transparent.
1. Open the dispenser by pressing and pulling up the tab on the lid.B
2. Pour in the rinse aid (max.110 ml), making sure it does not overow
from the dispenser. If this happens, clean the spill immediately with
a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the appliance tub.
ADJUSTING THE DOSAGE OF RINSE AID
I
f you are not completely satised with the drying results, you can adjus
t
the quantity of rinse aid used.
• Switch the dishwasher on using the button.ON/OFF
• Switch it o using the button.ON/OFF
• Press button three times - a beep will be heard.P
• Switch it on using the button.ON/OFF
• The program indicator light of the current set level ashes.
• Press button to select the level of rinse aid quantity to be supplied.P
• Switch it o using the buttonON/OFF
Setting is complete!
If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied.
A maximum of 5 levels can be set according to the dishwasher model.
The factory setting is specic to the model, please follow instruction
above to check this for your machine.
• If you see bluish streaks on the dishes, set a low number (2-3).
• If there are drops of water or limescale marks on the dishes, set a mid-
range number (4-5 ).
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device D.
Introduce the detergent into the dry dispenser E only. Place
the amount of detergent for pre-washing directly inside the tub.
1. When measuring out the detergent
refer to the mentioned earlier infor-
mation to add the proper quantity.
Inside the dispenser there are E
indications to help the detergent
dosing.
2. Remove detergent residues
from the edges of the dispenser
and close the cover until it clicks.
3. Close the lid of the detergent
dispenser by pulling it up un-
til the closing device is secured
in place.
The detergent dispenser automatically opens up at the right time ac-
cording to the program.
Usage of detergent not designed for dishwashers may cause mal-
function or damage to the appliance.
AB
C
D
E
EN
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories:
For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Values given for programmes other than the eco programme are indicative only. The actual time may vary depending on many factors such as tem-
perature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected
options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Program
Drying
phase
Duration
of wash
program
(h:min)*)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1. Eco 50° 4:00 11.5 0.78
2. Intensive 65° 2:30 15.0 1.5
3. Mixed 55° 2:25 15.0 1.35
4. Rapid 40’
45°
-0:40 8.0 0.9
5. Half Load 50° 1:15 11.0 0.9
PROGRAMS TABLE
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
1 ECO
Eco program is suitable to clean normally soiled tableware, that for this
use, it is the most ecient program in terms of its combined energy
and water consumption, and that it is used to assess compliance with
the EU Ecodesign legislation.
2 INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
3 MIXED
Mixed soil. For normally soiled dishes with dried food residues.
4 RAPID 40’
Program to be used for half load of lightly-soiled dishes with no dried
food residues. Does not have drying phase.
5 HALF LOAD
Ideal for washing a half load of lightly or normally soiled crockery.
Notes:
Please note that cycle Rapid 40’ is dedicated for lightly soiled dishes.


Product specificaties

Merk: Indesit
Categorie: Vaatwasser
Model: Slimline DI9E 2B10 UK
Apparaatplaatsing: Volledig ingebouwd
Soort bediening: Knoppen
Ingebouwd display: Nee
Gewicht: 27200 g
Breedte: 448 mm
Diepte: 555 mm
Hoogte: 820 mm
Netbelasting: 1900 W
Aantal couverts: 9 couverts
Automatische programma's: Nee
Droogsysteem: Statisch
Snoerlengte: 1.3 m
Uitgestelde start timer: Nee
Resterende tijd indicatie: Nee
Kinderslot: Nee
Duur cyclus: 240 min
Geluidsniveau: 51 dB
Energie-efficiĂŤntieklasse: F
Gewicht verpakking: 29000 g
Breedte verpakking: 500 mm
Diepte verpakking: 675 mm
Hoogte verpakking: 890 mm
Verlichting binnenin: Nee
Waterconsumptie per cyclus: 11.5 l
Stroom: 13 A
Geluidsemissieklasse: D
Tijdsduur tot uitschakelen: 12 min
Aantal wasprogramma's: 5
Duur cyclus (snelwas programma): 40 min
Energieverbruik per 100 cycli: 78 kWu
Land van herkomst: Polen
Douane productcode (TARIC): 84221100
Productafmeting: Slimline (45 cm)
Kleur bedieningspaneel: Wit
Bestek compartiment type: Mand
Kuip materiaal: Roestvrijstaal
Vloerindicatielampje: Nee
Zout indicator: Nee
Glansmiddel indicator: Nee
Bescherming tegen overstromen: Ja
Aantal temperatuurinstellingen: 3
Extra droog: Nee
Glasbescherming: Nee
Half-geladen: Nee
Beladingssensor: Nee
Afwasprogramma's: Eco 50°C, Intensive 65°C, Mixed, Quick 45°C
Energieverbruik per cyclus: 0.78 kWu
Bovenste mand verstelbare hoogte: Ja
Automatische deuropening: Nee
Maximale warmwatertoevoertemperatuur: 60 °C
Temperatuur (max): 70 °C
Watertoevoer: Koud
Aantal mandjes: 2 mand(en)
Stroomverbruik (ingeschakeld houden): 5 W
Stroomverbruik (indien uit): 0.5 W
Ingebouwde water verzachter: Ja
Export Control Classification Number (ECCN): 84221100
AC-ingangsspanning: 220-240 V
AC-ingangsfrequentie: 50 Hz
Producthoogte: Standaard (80-85 cm)

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit Slimline DI9E 2B10 UK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vaatwasser Indesit

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser