Indesit Slimline DF9E 1B10 UK Handleiding

Indesit Vaatwasser Slimline DF9E 1B10 UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit Slimline DF9E 1B10 UK (2 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

ENQuick Guide

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please register

your appliance on: www.indesit.com/register

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see PROD-

UCT DESCRIPTION) and must be lled when the green oat on the cap of

the salt reservoir is no longer visible.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water sof-

tener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dis-

penser A should be lled when when the dark optical

indicator on the dispenser door becomes transparent.C

NEVER pour the rinse aid directly into the appliance

tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device . Introduce the D

detergent into the dry dispenser only. Place the amount of detergent for E

pre-washing directly inside the tub.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently prevent-

ing scale buildup on heater, contributing also to better cleaning eciency.

This system regenerates itself with salt, therefore it is required to rell

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per Eco cycles with water hardness level set to . 5 3

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

CONTROL PANEL

FIRST TIME USE

Before using the appliance carefully read Safety Instructions

guide.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

PROGRAMS TABLE

1. On-O/Reset button with indicator light

2. Program selection knob

3. Start/Pause button with indicator light / Drain out

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

Program Programs description

Drying

phase

Duration

of wash

program

(h:min)*)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Eco program is suitable to clean normally soiled tableware, that for this use, it

is the most ecient program in terms of its combined energy and water consumption,

and that it is used to assess compliance with the EU Ecodesign legislation. 4:00 11.5 0.78

2. Intensive - 65° Program recommended for heavily soiled crockery, especially suitable

for pans and saucepans (not to be used for delicate items). 2:30 15.0 1.50

3. Mixed - 55° Mixed soil. For normally soiled dishes with dried food residues. 2:25 15.0 1.35

4. Rapid 40’ 45° - Program to be used for half load of lightly-soiled dishes with no dried

food residues. Does not have drying phase. -0:40 8.0 0.90

5. Half Load - 50° Ideal for washing ahalf load of lightly or normally soiled crockery. 1:15 11.0 0.90

6. Pre-Wash - Use to refresh crockery planned to be washed later. No detergent to be used

with this program. -0:10 4.0 0.01

2 3

Quick GuideEN

More information in the Daily Reference Guide on website.

CLEANING AND MAINTENANCE

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-

sales Service, please state the codes provided on your product‘s identication plate.

The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model

identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.

IEC 436

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

123 4

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)

please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

To remove the upper spray arm,

turn the plastic locking ring in

aclockwise direction.

The lower spray arm may

be removed by pulling it

upwards.

OPTIONS AND FUNCTIONS

DRAIN OUT - To stop and cancel the active cycle, the Drain Out function can be used. A long press of START/PAUSE button, will activate the DRAIN

OUT function. The active program will be stopped and the water in the dishwasher will be drained out.

LOADING THE RACKS CAPACITY: 9 standard place-settings

UPPER RACK

Load delicate and light

dishes: glasses, cups, sa-

ucers, low salad bowls.

(loading example for

the upper rack)

FOLDABLE

FLAPS WITH

ADJUSTABLE

POSITION

LOWER RACK

For pots, lids, plates,

salad bowls, cutlery

etc. Large plates and

lids should ideally be

placed at the sides to

avoid interferences

with the spray arm.

(loading example for

the lower rack)

CUTLERY BASKET

The basket is equipped with

top grilles for improved cut-

lery arrangement. The cut-

lery basket should be posi-

tioned only at the front of

the lower rack.

Knives and other utensils

with sharp edges must be

placed in the cutlery basket with the points

facing downwards or they must be posi-

tioned horizontally in the tip-up compart-

ments on the upper rack.

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The dishwasher does

not ll the water.

All LEDs are

blinking rapidly.

No water in the water supply or the tap is closed.

Make sure there is water in the water supply or the tap running.

The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-

washer and reboot.

The sieve in the water inlet hose is clogged; it

is necessary to clean it.

After having carried out the verication and cleaning, turn o and turn on the

dishwasher and restart anew program.

Dishwasher nishes

the cycle prematurely.

Drain hose positioned too low or siphoning

into home sewage system.

Check if end of drain hose is placed at correct height (see INSTALLATION).

Check for siphoning into home sewage system, install air admittance valve if

necessary.

Air in water supply. Check water supply for leaks or other issues letting air inside.

TROUBLESHOOTING Please scan the on your product in order to have more detailed information. QR code

400011687081B

09/2023 ks - Xerox Fabriano

Please scan on your product in order to have more detailed information. the QR code

Product specificaties

Merk:	Indesit
Categorie:	Vaatwasser
Model:	Slimline DF9E 1B10 UK
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Knoppen
Ingebouwd display:	Nee
Gewicht:	27200 g
Breedte:	448 mm
Diepte:	555 mm
Hoogte:	820 mm
Netbelasting:	1900 W
Aantal couverts:	9 couverts
Automatische programma's:	Nee
Droogsysteem:	Statisch
Snoerlengte:	1.3 m
Uitgestelde start timer:	Nee
Resterende tijd indicatie:	Nee
Kinderslot:	Nee
Duur cyclus:	240 min
Geluidsniveau:	51 dB
Energie-efficiëntieklasse:	F
Gewicht verpakking:	29000 g
Breedte verpakking:	500 mm
Diepte verpakking:	675 mm
Hoogte verpakking:	890 mm
Verlichting binnenin:	Nee
Waterconsumptie per cyclus:	11.5 l
Stroom:	13 A
Geluidsemissieklasse:	D
Tijdsduur tot uitschakelen:	12 min
Aantal wasprogramma's:	5
Duur cyclus (snelwas programma):	40 min
Energieverbruik per 100 cycli:	78 kWu
Land van herkomst:	Polen
Douane productcode (TARIC):	84221100
Productafmeting:	Slimline (45 cm)
Kleur bedieningspaneel:	Wit
Bestek compartiment type:	Mand
Kuip materiaal:	Roestvrijstaal
Vloerindicatielampje:	Nee
Zout indicator:	Nee
Glansmiddel indicator:	Nee
Bescherming tegen overstromen:	Ja
Aantal temperatuurinstellingen:	3
Extra droog:	Nee
Glasbescherming:	Nee
Half-geladen:	Nee
Beladingssensor:	Nee
Afwasprogramma's:	Eco 50°C, Intensive 65°C, Mixed, Quick 45°C
Energieverbruik per cyclus:	0.78 kWu
Bovenste mand verstelbare hoogte:	Ja
Automatische deuropening:	Nee
Maximale warmwatertoevoertemperatuur:	60 °C
Temperatuur (max):	70 °C
Watertoevoer:	Koud
Aantal mandjes:	2 mand(en)
Stroomverbruik (ingeschakeld houden):	5 W
Stroomverbruik (indien uit):	0.5 W
Ingebouwde water verzachter:	Ja
Export Control Classification Number (ECCN):	84221100
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 Hz
Producthoogte:	Standaard (80-85 cm)