Indesit OS 1A 200 H 2 UK.1 Handleiding

Bekijk gratis de handleiding van Indesit OS 1A 200 H 2 UK.1 (24 pagina’s), behorend tot de categorie kalapács. Deze gids werd als nuttig beoordeeld door 73 mensen en kreeg gemiddeld 4.0 sterren uit 4 reviews. Heb je een vraag over Indesit OS 1A 200 H 2 UK.1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTIONS FOR USE

1

GB

A. Lid handle

B. Lock (if provided)

C. Seal

D. Defrost water drain plug (if present)

E. Control panel

F. Basket (if present)

G. Condenser (located at the rear)

INSTALLATION

• Please refer to the chapter “BEFORE USING THE

APPLIANCE”.

• Unpack the appliance.

• Remove the 4 protection pieces inserted between lid

and appliance.

• Ensure that the defrosting water drainage plug (if provided)

is correctly positioned (4).

• For best operation of the appliance and in order to avoid

damage when the lid is opened, leave a space of at least 7

cm from the rear wall and 7 cm at the sides.

• Fit the accessories (if provided).

• Clean the inside of the appliance before using it.

1. Thermostat: it can be used to adjust the internal

temperature of the appliance.

2. Red LED (if provided): Indicates that the appliance

temperature is not suciently low.

3. Green LED (if provided): indicates that the appliance is on.

4. Yellow/orange illuminated button (if provided):

activates/deactivates the fast freeze function.

IMPORTANT: when using the product as a cooler please

check that the fast freeze function is not activated in order

to avoid bottle cracking.

The exact conguration of the controls may vary according

to the model.

Switching on the appliance

• The appliance is factory set for optimum freezer operation

at a temperature of -18°C.

• Plug in the appliance.

• The green LED lights up (if provided).

• Also the red LED (if provided) will switch on because the

temperature inside the appliance is not yet suciently low

for food storage. The red LED will normally switch o within

the rst six hours after the appliance is switched on.

• After connecting the appliance to the mains supply and

when the optimal temperature has been reached, ensure

that the fast freeze button is not pressed (the yellow LED, if

provided, is o ).

• Place food inside the product only when the red LED (if

provided) has switched o .

Note: As the seal is tight, the appliance lid cannot be

reopened immediately after closing. Wait a few minutes before

re-opening the lid of the appliance.

Temperature Adjustment

Use the thermostat to select the ideal storage temperature.

This product could be used both as freezer and as cooler.

• To use the product as freezer set thermostat in position

“freezer”. In this case the product must be used to store

frozen food, to freeze fresh food and to make ice.

Internal temperature could be set between -14°C and

-22°C (depending on the environmental conditions, this

CO Small

Product specificaties