Indesit IDV 75 Handleiding

Indesit Wasdroger IDV 75

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit IDV 75 (49 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/49

English, 1

Contents

Installation, 2-3

Where to install the tumble dryer

Ventilation

Electrical connections

Levelling the tumble dryer

Before you start your dryer

Description of the tumble dryer, 4

Front side

Rear side

Control panel

How to carry out a drying cycle, 5

Starting a drying programme

Drying settings, 6

Drying times

Drying programmes and options

Laundry, 7

Sorting laundry

Care labels

Special items

Warnings and suggestions, 8

General safety

Information on recycling and disposal

Saving energy and respecting the environment

Care and maintenance, 9

Disconnecting the power supply

Cleaning the filter after each cycle

Checking the drum after each cycle

Cleaning the tumble dryer

Troubleshooting, 10

Assistance, 11

Spare parts

IDV 75

 Keep this manual at hand for immediate reference

whenever necessary. Always store this manual close to the

tumble dryer and remember to pass it on to any new owners

when selling or transferring the appliance, so they may

familiarise with the warnings and suggestions herein

contained.

 Read these instructions carefully: the following pages

contain important information on installation and useful

suggestions for operating the appliance.

Instruction manual

TUMBLE DRYER

Nederlands,13

Español,25

Português,37

Where to install the tumble dryer

 Install the dryer far from gas

ranges, stoves, radiators or

hobs, as flames may damage it.

If the dryer is installed below a

worktop, ensure there are 10

mm between the upper panel of

the dryer and any objects above

it, and 15 mm between the sides

of the machine and the walls or

furniture units adjacent to it. This

ensures adequate air circulation. Make sure the air inlets on

the rear panel are not blocked or obstructed.

•You should also make sure that the room in which the

tumble dryer is installed is not damp, and that it is

adequately ventilated.

• We do not recommend that the dryer is installed in a

cupboard but the dryer must never be installed behind a

lockable door, a sliding door or a door with a hinge on the

opposite side to that of the dryer door.

Ventilation

This appliance gently dries laundry by taking in cold, clean and

relatively dry air, heating it and passing it through the fabric.

To facilitate the drying process, damp air is expelled at the

rear, through a ventilation hose. When the dryer is in use, there

has to be adequate ventilation to avoid a back flow of gases

into the room from appliances burning other fuels, including

open fires.

Mobile ventilation system

When using the tumble dryer with the mobile ventilation

system, a ventilation hose must be connected. The hose

should be securely fastened to the ventilation hole at the rear of

the appliance (see Description of the tumble dryer). We

recommend the hose is connected to an outlet near the tumble

dryer, if possible. If it cannot be installed in a permanent spot,

the tumble dryer will still function perfectly well if the ventilation

hose is passed through a partially-opened window.

 Make sure you do not point the ventilation hose towards the

air inlet, which is located on the rear of the appliance.

 The ventilation hose should not exceed a maximum length of

2.4 metres; it should also be shaken frequently to remove any

fluff, dust or water deposits inside it. Make sure you do not

crush the hose.

Fixed ventilation system

We recommend the ventilation hose is connected to a

ventilation system for windows or doors, available from the

retailer which originally sold you the appliance or from your

local spare parts stockist.

Installation

Wall ventilation hole

1. Leave an opening in the wall

to the left of the tumble dryer

installation site.

2. Make the hose as short and

straight as possible, in order to

prevent any moisture from

condensing and leaking back

into the appliance.

3. The hole in the wall must

also be straight and pointing

downwards, so that the flow of air coming out is not

impeded.

Areas A and B should be checked frequently, to prevent the

accumulation of fluff or debris, particularly if the tumble dryer

is used very often. The hose adaptor must be fitted

correctly, in order to prevent damp air from coming back

into the room.

Window ventilation hole

The ventilation hole should be

directly behind the dryer in

order to keep the hose as short

as possible.

 Make sure you do not push

the tumble dryer too far

backwards, as this could lead

to the ventilation hose being

crushed, bent or even

disconnected.

 There should be no cuts, kinks or U-shaped bends in the

hose, as these could impede ventilation or trap

condensation.

Ventilation through an open window

The end of the hose must be

facing downwards, in order to

prevent the hot, damp air from

forming condensation in the

room or the tumble dryer.

 Make sure that the tumble dryer is adequately ventilated,

and that the end of the ventilation hose is not pointing

towards the air inlet pipe on the rear of the appliance.

 The ventilation hose must always be fitted to ensure

optimum performance.

 Make sure that the ventilation hose and the air inlet vents

are not obstructed or blocked.

 Do not let the tumble dryer recirculate exhaust air.

 Improper use of the tumble dryer may result in fire hazards.

 The air emitted by the tumble dryer must not be expelled in

the same duct as used for the fumes produced by different

appliances which burn gas or other fuels.

 Do not discharge the exhaust air into an extraction system

or any duct with an extractor fan. This will affect the way the

thermal controls operate and can result in a fire hazard.

15 mm

Electrical connections

Before plugging the appliance into the socket, check the

following:

 Make sure your hands are dry.

 The socket must have an earth connection.

 The socket must be able to withstand the machines

maximum power output as indicated on the data plate (see

Description of the tumble dryer).

 The power supply voltage must fall within the values

indicated on the data plate (see Description of the tumble

dryer).

 The socket must be compatible with the dryers plug.

Should this not be the case, replace the plug or the

socket.

 Do not use extension cords.

 The dryer must not be installed outdoors, even if the

space is sheltered. It can be very dangerous if exposed

to rain or storms.

 Once installed, the dryers electrical wire and plug must

be within reach.

 The power cord must not be bent or squashed.

 If the plug being replaced is a non-rewirable type, then

the cut-off plug must be disposed of safely. DO NOT

leave it where it can be inserted into a socket and create

a shock hazard.

 The power cord should be checked periodically and

replaced by a cord specially prepared for this dryer and

fitted only by authorized technicians (see Service). New or

longer power cords are supplied at an extra charge by

authorized dealers.

 The manufacturer denies any responsibility should any

of these rules not be followed.

 If in doubt about any of the above consult a

qualified electrician.

Levelling the tumble dryer

The tumble dryer should be installed level in order to

operate correctly.

After installing the tumble

dryer in its permanent

position, make sure it is

level; check its side-to-side

levelling first, followed by

front-to-back.

If the tumble dryer is not

perfectly level, use a wooden

block to support it while you

adjust the two front feet, up

or down as necessary.

Before you start your dryer

Once the tumble dryer is installed, clean the inside of the

drum before operating it and remove any dirt accumulated

during transportation.

Product specificaties

Merk:	Indesit
Categorie:	Wasdroger
Model:	IDV 75
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons,Rotary
Kleur van het product:	Wit
Gewicht:	- g
Breedte:	595 mm
Diepte:	584 mm
Hoogte:	850 mm
Type lader:	Voorbelading
Trommelinhoud:	- l
Aantal droogprogramma's:	16
Geluidsniveau:	- dB
Energie-efficiëntieklasse:	B
Energie consumptie:	4.06 kWu
Gewicht verpakking:	- g
Diepte verpakking:	- mm
Hoogte verpakking:	- mm
Nominale capaciteit:	7 kg