Imarflex IRS-650RT Handleiding

Imarflex Strijkijzer IRS-650RT

Bekijk gratis de handleiding van Imarflex IRS-650RT (3 pagina’s), behorend tot de categorie Strijkijzer. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over Imarflex IRS-650RT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/3
TABLE GUIDE:
ICON
SETTING
FABRIC
TEMPERATURE
Dry Iron
Nylon
Low
Silk & Wool
Medium
Cotton & Linen
High
Continuous
Steam
Applicable for
Silk & Wool
Cotton & Linen
Medium & High
CLEANING AND MAINTENANCE
1. Always unplug the appliance after every use.
2. After each use, drain any remaining water from the tank to help prevent
limescale buildup.
3. To clean surface limescale or dust, use a soft cloth dampened with a solution
of 15% white vinegar and 85% water, and gently wipe the affected areas.
4. If you notice a decrease in steam output, fill the water tank with the vinegar
solution and let it sit for about 40 minutes. Then shake out the liquid, refill the
tank with clean water, and repeat the process a few times to thoroughly
remove any limescale buildup.
REMINDER: Please do not forget to register your product warranty through
the warranty registration website at
https://imarflex.ph
Distributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China
SPECIFICATION:
Model No : IRS-650RT
Input Voltage : 0 Va.c. 60Hz 23
Power : 15 00W
Box Dimension : 323x160x110mm
Unit Dimension : 294x88x113mm
Gross Weight : 0.96kg
Unit Weight : 0.74kg
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instruction carefully.
2. Before using the unit, check if the voltage indicated corresponds with convenience
outlet (230Va.c.).
3. Do not use any appliance with a damaged cord or plug. If the cord is damaged it
should be replaced with the same type and size or bring the unit to the nearest
authorized service center.
4. Do not leave the iron unattended while it is connected to the convenience outlet.
5. Children should be supervised to ensure that they do not play with the appliance.
6. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
7. Do not use two-way socket with another appliance.
8. To protect against electric shock, do not immerse the iron in water.
9. Unplug the iron when lling with water; emptying the tank or after using the iron.
10. The iron should always be turned OFF before plugging or unplugging from the
outlet.
11. Do not allow cord to touch hot surface of the iron. Loop cord loosely around the
iron before storing.
12. For household use only; not intended for any business purposes
13. Save this instruction for future reference.
DESCRIPTION OF PARTS:
Control Features
1. Steam Press this setting to release a steamideal for eliminating stubborn
wrinkles.
2. Water Tank - Used to ll the iron's water reservoir.
3. Heat Selector Knob - Turn to select the appropriate temperature for dierent
fabric types.
Before First Use
1. Remove all packaging materials and stickers from the appliance.
2. Place the unit on a at, stable, and heat-resistant surface.
3. Hang the garment you intend to steam.
4. Open the water inlet cover and ll the tank with approximately 105ml of clean,
distilled, or puried water.
5. Close the inlet cover firmly, then plug in the appliance to start the heating
process.
Note: It is normal for the iron to emit a slight odor during initial use. This will dissipate
after a few uses.
Using as a Dry Iron
1. Plug the iron into a power outlet.
2. All indicator lights will illuminate for one second, then switch to standby mode.
3. Press the power button to turn on the unit.
4. Select the dry iron or nylon setting. The indicator will flash while the iron is heating.
5. Once the light is steady, the iron is ready for use.
Note: The iron heats up faster than it cools down. For best results, start with
delicate fabrics and progress to those requiring higher heat.
6. Allow extra time for reheating if adjusting from a lower to a higher temperature
setting.
Switching to Steamer Mode
Turn the handle 90° clockwise until you hear a click. This indicates that the iron has
successfully switched to steamer mode.
Using as a Steam Iron
1. Open the water inlet cover and ll the tank with approximately 105ml of clean,
distilled, or puried water then close the inlet cover rmly.
Note: Do not overfill the water tank. The maximum capacity is 105 ml.
2. Plug the iron into a power outlet.
3. All indicator lights will illuminate for one second, then switch to standby mode
4. Press the power button to turn on the unit.
5. Select the desired steam setting:
a. - Low Steam mode for silk and wool.
b. - High Steam mode for cotton and linen.
6. The indicator light will ash while the iron is preheating. Wait until it remains
steadily lit before proceeding.
7. Press the steam button to begin steam output.
8. Steam can be used in both horizontal (flat) and vertical (upright) positions.
9. To change modes, press the desired setting button again. If the indicator light is
ashing, the appliance is still preheating and not ready for use. Wait until it
remains steadily lit before proceeding.
10. Press the steam button to begin steam output.
11. Place the unit in the heat-insulated base when not in use.


Product specificaties

Merk: Imarflex
Categorie: Strijkijzer
Model: IRS-650RT

Heb je hulp nodig?

Als je hulp nodig hebt met Imarflex IRS-650RT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden