Ikan RB5-3PT-KIT Handleiding

Ikan Verlichting RB5-3PT-KIT

Bekijk gratis de handleiding van Ikan RB5-3PT-KIT (4 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.3 sterren uit 1.5 reviews. Heb je een vraag over Ikan RB5-3PT-KIT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

www.ikancorp.com

713.272.8822

CHECKED BY

QUICKSTART GUIDE

RB5-3PT-KIT

Kit with 3x Rayden Bi-Color Half x 1 LED Soft Light

What’s Included

3 x Half x 1 Bi-Color LED Light

3 x Heavy Duty Stand

3 x Gold Mount Battery Plate

3 x V-Mount Battery Plate

1 x Light Kit Bag (ID-500-3L)

1 x Stand Bag

Getting to know your RAYDEN lights

PRECAUTIONS:

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use only the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting service department at

ikancorp.com.

• Keep the unit clean and free of dust. The unit can be cleaned with a soft dry cloth.

• Use only parts provided by the manufacture.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a Stand:

The Rayden LED Light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily

sit and adjust on any stand. The 30° yoke gives the light free-range motion without obstructions. The Baby

" and Junior 1-

" Combo Pin allows the user a wide range of stands. The light can be mounted either

horizontally or vertically on a

" baby pin.

Power the LEDs:

The Rayden light comes with an included AC power supply and 6 foot cable. This allows the user to plug

into any standard 120-240v electrical outlet. The Rayden LED light can be powered from either an AB

Mount pro battery, or a V-Mount battery. The ﬁxture comes standard with either AB-Mount or V-Mount

plates. The plates can be easily removed and replaced for the type of batteries that are available.

Adjusting the Color & Brightness of the Light:

The Rayden LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was

designed with the idea that it could be reached and adjusted when the light is up on a stand. The knob

has three push settings.

1. The default setting is the brightness from 10%-100% brightness.

2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate. Once the screws

are removed, separate the plate from the back of the ﬁxture. Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process. Plug the wired 2-pin connector into the ﬁxture where

we just unplugged the Gold-Mount plate at the back of the light. Orient the holes on the plate to match up

with the screw holes on the back of the ﬁxture. Using the screws supplied with the V-Mount plate, screw

in the plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

Remote Control

The light can be adjusted also using the RF remote control. The use of the remote allows for multiple lights

to be connected as well as control of the brightness.

Remote Control Button Functions

• Press & Hold “A” for 5 seconds to sync remote control to light(s).

• Press “A” & “B” to power ON/OFF

• Press “B” to adjust 4 levels of light intensity in increments of 25%

• Press and Hold “C” & “D” for 5 seconds to Enable/Disable sound

• Hold down “C” to increase light intensity 0%-100%

• Hold down “D” to decrease light intensity 100%-0%

Speciﬁcations & Photometrics

Specs

Head Type Bi-Color 5600K-3200K

Rating 36.4w ; 14-18VDC

Light Source 608 0.06 watt LEDs

Power Supply Input: 110-220VAC ; Output:15VDC

Lens 45°

Beam Angle 50°

Yoke & Pin 30° Angled yoke w/ Baby

” & 1

” Combo Pin

Fixture Size 18 x 16 x 6 In.

Fixture Weight 9 lbs

Optional Accessories

Some other products that work well with the RB5 available from Ikan include:

HD-STND

ROLLR-STND10

CP-STND-V3

SW-04

KCP-703

Heavy Duty Light Stand

2 Stage Roller Stand 10 ft 6 in

Compact Light Stand Version 3

Safety Wire

Stage Clamp w/ 16mm Stud

Photometrics

5600K 3200K

3ft 282 fc 3035 lux 3ft 276 fc 2970 lux

6ft 79 fc 850 lux 6ft 77 fc 828 lux

9ft 32 fc 344 lux 9ft 31 fc 333 lux

Product specificaties

Merk:	Ikan
Categorie:	Verlichting
Model:	RB5-3PT-KIT
Kleur van het product:	Zwart
Gewicht verpakking:	20400 g
Materiaal behuizing:	Kunststof
Type stroombron:	AC
Vermogensverbruik (max):	150 W
Aantal per verpakking:	3 stuk(s)
Color Rendering Index (CRI):	95
Stralingshoek:	50 °
Aantal leds:	6082
Kleurtemperatuur (max):	5600 K
Lichtopbrengst (max):	1218 lm