IHome iBT55 Handleiding

IHome Speaker iBT55

Lees hieronder de 📖 handleiding in het Nederlandse voor IHome iBT55 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

FCC Information

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

• Place the unit on a level surface away from sources of direct sunlight or excessive

heat.

• Protect your furniture when placing your unit on a natural wood and lacquered ﬁnish.

A cloth or other protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger

cleaning agents such as thinner or similar materials can damage the surface of the

unit.

Maintenance

FCC ID : EMOIBT55

IC : 986B-IBT55

Bluetooth

Rechargeable

Micro Speaker

Limited 1 Year Warranty Information

Printed in China

IMPORTANT

Read before proceeding

If you have any question regarding the operation or use of this product, please visit www.ihome.com

to view answers to frequently asked questions.

To learn more about this and other iHome products, please visit us online at www.ihome.com

Questions? Visit www.ihome.com

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject

to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and

compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure

and compliance.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Part 15 of the FCC Rules, operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

CHARGE

BEFORE

USE

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants

this product to be free from defects in workmanship and materials, under normal use and

conditions, for a period of one (1) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to ﬁrst return it to the

store where it was originally purchased. Should this fail to resolve the matter and service

still be required by reason of any defect or malfunction during the warranty period, SDI will

repair or, at its discretion, replace this product without charge. This decision is subject to

veriﬁcation of the defect or malfunction upon delivery of this product to the Factory Service

Center authorized by Customer Service.

If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return

Authorization Number and shipping instructions.

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was

designed. It does not cover (i) products which have been damaged by negligence or willful

actions, misuse or accident, or which have been modiﬁed or repaired by unauthorized

persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage

to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this

product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners

of the product other than to the original purchaser. In no event will SDI or any of its affiliates,

contractors, resellers, their oﬃcers, directors, shareholders, members or agents be liable

to you or any third party for any consequential or incidental damages, any lost proﬁts,

actual, exemplary or punitive damages. (Some states do not allow limitations on implied

warranties or exclusion of consequential damages, so these restrictions may not apply to

you.) This warranty gives you speciﬁc legal rights, and you may also have other rights

which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned

disclaimer of warranty is contractually binding to you upon your transfer of currency (money

order, cashier's check, or credit card) for purchase of your SDI product.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

Model: iBT55

MicroGo

Blue

Rechar

icro S

A Consumer Guide to Product Safety

When used in the directed manner, this unit has been designed and manufactured to ensure

your personal safety. However, improper use can result in potential electrical shock or fire

hazards. Please read all safety and operating instructions carefully before installation and use,

and keep these instructions handy for future reference. Take special note of all warnings listed

in these instructions and on the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a

bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation – The unit should be situated so that its location or position does not interfere

with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or

similar surface that may block ventilation openings. Also, it should not be placed in a

built-in installation, such as a bookcase or cabinet, which may impede the ﬂow of air

through the ventilation openings.

3. Heat – The unit should be situated away from heat sources such as radiators, heat

registers, stoves or other appliances (including ampliﬁers) that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance.

5. Power-Cable Protection – Power supply cables should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them. It is always best

to have a clear area from where the cable exits the unit to where it is plugged into an AC

socket.

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance

section of this manual for cleaning instructions.

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids

are not spilled into any openings or vents located on the product.

8. – Do not use attachments not recommended by the product manufacturer.Attachments

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and

disconnect the antenna or cable system during a lightning storm or when it is left unattended

and unused for long periods of time. This will prevent damage to the product due to

lightning and power-line surges.

10. Overloading – Do not overload wall sockets, extension cords, or integral convenience

receptacles as this can result in a risk of ﬁre or electric shock.

11. Damage Requiring Service – The unit should be serviced by qualified service personnel

when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such

as a month or longer, the power cable should be unplugged from the unit to prevent

damage or corrosion.

13. Servicing – The user should not attempt to service the unit beyond those methods

described in the user’s operating instructions. Service methods not covered in the

operating instructions should be referred to qualiﬁed service personnel.

Troubleshooting

Unit doesn’t respond (no power)

• Make sure unit is completely charged.

• Make sure your device is properly paired with the iBT55.

• Make sure the Power is ON (Right) position.

Trouble pairing device/computer with iBT55

• When you power ON the speaker, it will automatically link with the last previously paired

Bluetooth device if the device is still within range (approx. 30 feet). To pair with a different

device you must turn oﬀ Bluetooth capability on the already paired device, or take it out

of range.

• If your device does not auto-link when within range, re-pair the device. To do so, ﬁrst

delete the iBT55 from your Bluetooth devices menu. Move the Power Switch to ON

(Right) position to begin pairing (see Using Bluetooth with the MicroGo+ for pairing

details).

• Make sure your device is working properly. Check your device’s manual for details on

Bluetooth pairing and linking.

iBT55-071615-D

Bluetooth Mode

• Slide the Oﬀ/On Switch on the speaker to the ON ( ) position.

• Press and hold the for 2 seconds.Tones will sound and Bluetooth Pairing Button

the light will ﬂash blue to indicate pairing attempt.

• Place your audio device in Bluetooth mode (look in the device’s Settings menu) and

make it “discoverable”. “iHome MicroGo” should appear on your device.

• If “Not Connected”, “Not Paired” or similar message appears, select “iHome MicroGo”

to connect. If prompted for a password, enter “1234” on your device’s keypad.

• Once paired, the light will glow solid blue and a confirmation beep will sound and you

can then stream audio. If pairing is not successful, turn the power OFF on the speaker

and repeat pairing procedure.

• To listen to Bluetooth audio in the future, slide the Oﬀ/On Switch on the speaker to the

ON position. The light will ﬂash blue slowly as the speaker attempts to auto-link with the

last previously linked unit in range (30 feet).

• Control Bluetooth audio from your device.

Remember to turn oﬀ the speaker and your device after listening.

NOTE: When unit is charging, the blue light will appear solid red.

Using Bluetooth with the iBT55

The iBT55 is powered by a rechargeable battery in the speaker. Make sure to charge

the speaker before using.

• Connect the micro-USB plug to the USB Charging jack on the speaker.

• Connect the larger USB plug to USB AC adaptor or to a powered USB port, such as that

on a computer. The light on the speaker will turn to solid red while charging and turn off

when fully charged. When the red light ﬂashes or if you start to notice sound distortion

at higher volumes, it's time to recharge the battery.

Charging the iBT55

Speaker

Oﬀ/On Power Switch

Bluetooth Pairing Button

USB Charging Jack

LED

Charging the iBT55

Note: Charge speaker before use.

Computer USB port

Note:

• When not in use, turn speaker OFF to

save battery power.

• Unit will automatically power down after

5 minutes if no audio or Bluetooth

stream is detected. Following auto

power oﬀ, slide the On/Oﬀ Power

Switch to Oﬀ and then On to turn the

iBT55 back on.

Internal Rechargeable Lithium-ion Battery

This device uses an internal rechargeable lithium-ion battery that should last the lifetime

of the device. If you suspect your battery may be dead, try charging it several times. If the

battery does not recharge, please contact us for repair information.

WARNING/DISPOSAL OF UNIT

Please do NOT attempt to change the battery yourself. If the battery has died and you do

not want us to replace your battery, you should follow the disposal instructions below:

• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain

toxic substances.

• Always dispose of used batteries/electronics in accordance with the prevailing community

regulations that apply to the disposal of batteries/electronics. If there are no local

regulations concerning battery/electronics disposal, please dispose of the device in a

waste bin for electronic devices.

• Many electronics retailers now recycle batteries and other electronic components at no

charge. Check to see which ones in your area do so.

CAUTION

The battery used in this device may present a risk of ﬁre, explosion or chemical burn if

mistreated

• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in

any way abnormal.

• Never disassemble the unit or attempt to remove battery as that could cause leakage

of alkaline solution or other electrolytic substance.

• Always conﬁrm that the temperature is 5°C 35° C (41° - 95° Fahrenheit) before you

charge the battery.

• Leakage or deterioration of the battery may occur if this warning is not heeded.

• Never expose the battery to any liquid.

• Never expose the battery to excessive heat such as direct sunlight or ﬁre.Never use

the battery pack in an unventilated vehicle where excessive internal temperatures may

be encountered.

• Always keep the battery out of the reach of infants and small children.

Product specificaties

Merk:	IHome
Categorie:	Speaker
Model:	iBT55

Heb je hulp nodig?

Als je hulp nodig hebt met IHome iBT55 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker IHome

IHome iHM46 Handleiding

17 Januari 2024

IHome iW2 Handleiding

17 Januari 2024

IHome DF-M63 Handleiding

17 Januari 2024

IHome iM70 Handleiding

17 Januari 2024

IHome TIMEBASE iBTW20 Handleiding

17 Januari 2024

IHome iBT4 Handleiding

17 Januari 2024

IHome Magnify iCVBT6 Handleiding

17 Januari 2024

IHome iD48 Handleiding

17 Januari 2024

IHome iBT68 Handleiding

17 Januari 2024

IHome iBT65 Handleiding

17 Januari 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024