IFM IN507A Handleiding
IFM
Niet gecategoriseerd
IN507A
Bekijk gratis de handleiding van IFM IN507A (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 293 mensen en kreeg gemiddeld 4.8 sterren uit 147 reviews. Heb je een vraag over IFM IN507A of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
UK
Operating instructions
(Ex protection related part) for inductive sensors
according to EU directive 2014/34/EU annex VIII (ATEX)
group II, equipment category 3D/3G
IN507A
704238 / 01 01 / 2017
2
Remarks for safe use in hazardous areas
Functions and features
• Use in hazardous areas according to the classification
II 3D
(group II, category 3D, apparatus for dust atmosphere).
The requirements of the standards EN 60079-0 and EN 60079-31 are met.
• Use in hazardous areas according to the classification
II 3G
(group II, category 3G, apparatus for gas atmosphere).
The requirements of the EN 60079-15 standard are met.
• Marking (see unit or technical data sheet):
II 3D Ex tc IIIC T80°C Dc IP67 X
II 3G Ex nA IIC T6 Gc X
• Permissible ambient temperature of the application (proper usage) (see unit or technical
data sheet):
-20°C 60°C≤ Ta ≤
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qualified staff
must have knowledge of protection classes, regulations and provisions for apparatus in
hazardous areas.
Check whether the classification (see "Marking" above and marking on the unit) is suitable
for the application.
Installation remarks / Installation
• Adhere to the respective national regulations and provisions as well as the relevant
installation regulations.
• Avoid electrostatic charging on plastic units and cables.
• To avoid electrostatic charging clean the unit with a damp cloth only.
• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential
of metal parts (plug housing, fixing elements, protective housing, etc.).
• Do not mount the unit in the dust flow.
• Avoid dust deposits on the units.
• Protect the units and the cables efficiently against damage.
• For the connections and the electrical characteristics please see the unit marking or the
technical data sheet.
• To avoid soiling, do not remove the connector cover until attaching the socket.
• Protect the unit (plastic parts) from UV light.
Special conditions for safe operation
• The unit (1) must only be installed in conjunction with the supplied protective housing (2).
• Use the supplied mounting plate (4) to ensure a secure fit of the mounting screws (5).
3
UK
1
24
5
3
1
1. Proximity sensor.
2. Protective housing.
3. Socket EVC**A (accessory to be orde-
red separately).
4. Mounting plate.
5. Mounting screws (supplied with the
unit).
• Attach the connection cable (3) and tighten firmly before mounting.
• Use sockets which are suited for hazardous areas, e.g. ifm sockets EVC**A with Ex
certificate (certificate number BVS 08 ATEX E 109 U).
• Secure the sockets by tightening the hexagon coupling nut sufficiently according to the
requirements of the Ex protection related operating instructions of the socket.
• Do not disconnect the connector while live.
• The housings are rated for a low mechanical risk and tested with an impact energy of 4
joules.
• The sensing face is not designed for mechanical stress. Therefore the unit must only be
operated with target pucks which exclude mechanical stress on the sensing face.
• Tightening torque of the mounting screws MA = 1 Nm (±10%).
Maintenance / Repair
The unit must not be modified nor can it be repaired. In case of a fault please contact the
manufacturer.
If required, the technical data sheets and EC declarations of conformity can be obtained
from the manufacturer. Indicate the article number.
Product specificaties
| Merk: | IFM |
| Categorie: | Niet gecategoriseerd |
| Model: | IN507A |
Heb je hulp nodig?
Als je hulp nodig hebt met IFM IN507A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd IFM
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
23 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
2 Mei 2025
Handleiding Niet gecategoriseerd
- VFAN
- Drayton
- Rosseto
- Baby Annabell
- Sharper Image
- PureLink
- RF Elements
- Exagerate
- Xigmatek
- Ibm
- ServSense
- Gator Frameworks
- Power Acoustik
- GE
- Balt
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025