IDIS DC-B1203X Handleiding

IDIS Bewakingscamera DC-B1203X

Lees hieronder de 📖 handleiding in het Nederlandse voor IDIS DC-B1203X (46 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46

Network

Camera

Operation Manual

DC-B1203X

This is a basic operation manual for use of an IDIS network camera. Users who are using this product for the rst time,

as well as users with experience using comparable products, must read this operation manual carefully before use and

heed to the warnings and precautions contained herein while using the product. Safety warnings and precautions

contained in this operation manual are intended to promote proper use of the product and thereby prevent accidents

and property damage and must be followed at all times. Once you have read this operation manual, keep it at an easily

accessible location for future reference.

•The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and

accessories or from the user’s failure to comply with the instructions contained in this manual.

•The information in this document is believed to be accurate as of the date of publication even though explanation

about some functions may not be incorporated. The manufacturer is not responsible for any problems resulting from

the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this

publication may be issued to incorporate such changes.

•It is recommended that rst-time users of this network camera and individuals who are not familiar with its use seek

technical assistance from their retailer regarding product installation and use.

•If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and

seek professional assistance.

•Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for

commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.

Safety Symbols

Symbol DescriptionType

Warning An important instruction or set of important instructions that can lead to severe injury or even death

if not followed.

Caution An instruction or set of instruction that can lead to personal injury and/or property damage if not

followed.

In-Text

Symbol DescriptionType

Caution Important information concerning a specic function.

Note Useful information concerning a specic function.

Before reading this manual

Safety Precautions

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safeguards

1. Read Instructions

All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not

use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the approval

of the manufacturer as such additions may result in the risk of re,

electric shock or other personal injury.

5. Water and/or Moisture

Do not use this equipment near water or in contact with water.

6. Placing and Accessories

Do not place this equipment on an wall or ceiling that is not strong

enough to sustain the camera. The equipment may fall, causing

serious injury to a child or adult, and serious damage to the

equipment. Wall or shelf mounting should follow the manufacturer's

instructions, and should use a mounting kit approved by the

manufacturer.

This equipment and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

equipment and cart combination to overturn.

Do not place this equipment in an enclosed space. Sucient

ventilation is required to prevent an increase in ambient temperature

which can cause malfunction or the risk of re.

7. Power Sources

This equipment should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power, please consult your equipment dealer or local power

company.

You may want to install a UPS (Uninterruptible Power Supply)

system for safe operation in order to prevent damage caused by an

unexpected power stoppage. Any questions concerning UPS, consult

your UPS retailer.

This equipment should be remain readily operable.

8. Power Cord

Operator or installer must remove power and TNT connections before

handling the equipment.

9. Lightning

For added protection for this equipment during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the equipment due to lightning

and power-line surges. If thunder or lightning is common where the

equipment is installed, use a surge protection device.

10. Overloading

Do not overload wall outlets and extension cords as this can result in

the risk of re or electric shock.

11. Objects and Liquids

Never push objects of any kind through openings of this equipment

as they may touch dangerous voltage points or short out parts that

could result in a re or electric shock. Never spill liquid of any kind on

the equipment.

12. Servicing

Do not attempt to service this equipment yourself. Refer all servicing

to qualied service personnel.

13. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to

qualied service personnel under the following conditions:

A. When the power-supply cord or the plug has been damaged.

B. If liquid is spilled, or objects have hit the equipment.

C. If the equipment has been exposed to rain or water.

D. If the equipment does not operate normally by following the

operating instructions, adjust only those controls that are covered

by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work

by a qualied technician to restore the equipment to its normal

operation.

E. If the equipment has been dropped, or the cabinet damaged.

F. When the equipment exhibits a distinct change in performance —

this indicates a need for service.

14. Replacement Parts

When replacement parts are required, be sure the service technician

has used replacement parts specied by the manufacturer or that

have the same characteristics as the original part. Unauthorized

substitutions may result in re, electric shock or other hazards.

15. Safety Check

Upon completion of any service or repairs to this equipment, ask the

service technician to perform safety checks to determine that the

equipment is in proper operating condition.

16. Field Installation

This installation should be made by a qualied service person and

should conform to all local codes.

17. Correct Batteries

Warning: Risk of explosion if battery is replaced by an incorrect type.

Replace only with the same or equivalent type.

Dispose of used batteries according to the instructions.

The battery shall not be exposed to excessive heat such as sunshine,

re or the like.

18. Tmra

A manufacturer’s maximum recommended ambient temperature

(Tmra) for the equipment must be specied so that the customer and

installer may determine a suitable maximum operating environment

for the equipment.

Product specificaties

Merk:	IDIS
Categorie:	Bewakingscamera
Model:	DC-B1203X
Kleur van het product:	Black, White
Gewicht:	400 g
Breedte:	75.6 mm
Diepte:	129.3 mm
Hoogte:	61 mm
Soort:	IP-beveiligingscamera
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	32 GB
Ondersteund audioformaat:	ADPCM, G.711, G.726
Vormfactor:	Doos
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Maximum resolutie:	1920 x 1080 Pixels
Videocompressieformaten:	H.264, M-JPEG
Type stroombron:	Power over Ethernet (PoE)
Minimale belichting:	0.005 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC
Video bewegings-detectie:	Ja
HTTPS-encryptie:	Ja
Audiosysteem:	2-weg
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	FCC, CE, KC
Omvang optische sensor:	1/2.8 "
Beeldstabilisator:	Ja
Type beeldsensor:	CMOS
Camera sluitertijd:	1/30 - 1/10000 s
Type camerasluiter:	Electronic, Mechanical
Ondersteunde grafische resoluties:	352 x 240,640 x 360,1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Ruisonderdrukking:	Ja
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.1x, IEEE 802.3af
Maximaal 30 frames per seconde:	60 fps
Ondersteunde netwerkprotocollen:	RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/UDP RTSP/TCP, HTTP, HTTPS, FTP, SNTP, SMTP, FEN, mDNS, uPNP
IP-adresfilter:	Ja
Progressive scan:	Ja
Ethernet interface type:	Gigabit Ethernet
Signaal/ruis-verhouding:	45 dB
Power over Ethernet (PoE):	Ja
Dag/nacht modus:	Ja
Methode voor streaming:	Multicast
Videostreaming:	Ja
Infrarood (IR)-afsluitingsfilter:	Ja
Alarm ingang/uitgang:	Ja
Bitratecontrole:	Variabele bitsnelheid (VBR)
Aanpassing van de afbeeldingskwaliteit:	Scherpte
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Stroomverbruik (typisch):	4.8 W
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Aanpassing sluitertijd:	Automatisch/handmatig
Privézone maskeren:	Ja
Systeemfuncties intelligente videobewaking (IVS):	Gezichtsherkenning
Draaien & spiegelen:	Ja
Type waarschuwingsnotificatie:	E-mail, Snapshot alert message
Lens mount interface:	C/CS-aansluiting
Actieve ombevoegde demontage alarm:	Ja
3D-geluidsreductie:	Ja
Iris:	Ja