Icom IC-M411 Handleiding

Icom Niet gecategoriseerd IC-M411

Lees hieronder de 📖 handleiding in het Nederlandse voor Icom IC-M411 (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64

INSTRUCTION MANUAL

iM411

VHF MARINE TRANSCEIVER

FOREWORD

Thank you for purchasing this Icom product. The IC-M411

vhf marine transceiver is designed and built with Icom’s

state of the art technology and craftsmanship. With proper

care, this transceiver should provide you with years of trou-

ble-free operation.

We want to take a couple of moments of your time to thank

you for making the IC-M411 your radio of choice, and hope

you agree with Icom’s philosophy of “technology ﬁrst.” Many

hours of research and development went into the design of

your IC-M411.

D FEATURES

m Advanced receiver performance

m Easy to hear speaker

m Built-in DSC meets Class D requirement

m Rugged waterproof construction

m Favorite channel function

m AquaQuake water draining function

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL — This in-

struction manual contains important operating instructions

for the IC-M411.

EXPLICIT DEFINITIONS

WORD DEFINITION

R WARNING!

CAUTION

NOTE

Personal injury, fire hazard or electric

shock may occur.

Equipment damage may occur.

Recommended for optimum use. No risk of

personal injury, ﬁre or electric shock.

CLE A N TH E TRAN SC EIV ER A N D MI C RO PHONE

THOROUGH LY WITH FRESH WATER after exposure

to water including salt water, otherwise, the keys and

switches may become inoperable due to salt crystalliza-

tion.

Icom, Icom Inc. and the logo are registered trademarks of Icom Incor-

porated (Japan) in the United States, the United Kingdom, Germany, France,

Spain, Russia and/or other countries.

IN CASE OF EMERGENCY

If your vessel requires assistance, contact other vessels and

the Coast Guard by sending a Distress call on Channel 16.

USING CHANNEL 16

DISTRESS CALL PROCEDURE

1. “MAYDAY MAYDAY MAYDAY.”

2. “THIS IS ...............” (name of vessel)

3. Your call sign or other indication of the vessel (AND

9-digit DSC ID if you have one).

4. “LOCATED AT ...............” (your position)

5. The nature of the distress and assistance required.

6. Any other information which might facilitate the rescue.

Or, transmit your Distress call using digital selective calling

on Channel 70.

USING DIGITAL SELECTIVE CALLING (Ch 70)

DISTRESS CALL PROCEDURE

1. Whi le lif tin g up the key cover, push and ho ld

[DISTRESS] for 5 sec. until you hear 5 short beeps

change to one long beep.

2. Wait for an acknowledgment on Channel 70 from a

coast station.

• After the acknowledgement is received, Channel 16 is

automatically selected.

3. Push and hold [PTT], then transmit the appropriate

information as listed above.

INSTALLATION NOTE

The installation of this equipment should be made in such a

manner as to respect the EC recommended electromagnetic

ﬁeld exposure limits (1999/519/EC).

The maximum RF power available from this device is 25

watts. The antenna should be installed as high as possible

for maximum efficiency and that this installation height

should be at least 5 meters above ground (or accessible)

level. In the case where an antenna cannot be installed at

a reasonable height, then the transmitter should neither be

continuously operated for long periods if any person is within

5 meters of the antenna, nor operated at all if any person is

touching the antenna.

In all cases any possible risk depends on the transmitter

being activated for long periods. (Actual recommendation

limits are speciﬁed as an average of 6 minutes) Normally the

transmitter is not active for long periods of time. Some radio

licenses will require that a timer circuit automatically cuts the

transmitter after 1–2 minutes etc.

Similarly some types of transmitter, SSB, CW, AM, etc. have

a lower ‘average’ output power and the perceived risk is even

lower.

Product specificaties

Merk:	Icom
Categorie:	Niet gecategoriseerd
Model:	IC-M411

Heb je hulp nodig?

Als je hulp nodig hebt met Icom IC-M411 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Icom

Icom IC-M Handleiding

27 April 2023

Icom Phonak Handleiding

13 Maart 2023

Icom IC-M411 Handleiding

4 Maart 2023

Icom IC-M91D Handleiding

2 Maart 2023

Icom IC-M33 Handleiding

5 Februari 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024