Husqvarna 281 XP Handleiding
Husqvarna
Zaagmachine
281 XP
Bekijk gratis de handleiding van Husqvarna 281 XP (40 pagina’s), behorend tot de categorie Zaagmachine. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.1 sterren uit 20 reviews. Heb je een vraag over Husqvarna 281 XP of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/40
281 XP®, 288 XP®
EN Operator's manual 2-37
Contents
Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 9
Operation...................................................................... 10
Maintenance................................................................. 20
Troubleshooting............................................................ 32
Transportation and storage...........................................33
Technical data.............................................................. 34
Accessories.................................................................. 35
EC Declaration of Conformity....................................... 37
Introduction
Intended use
This product is intended for sawing in wood.
Note: National regulations can set limit to the operation
of the product.
Product description
The Husqvarna 281 XP, 288 XP are chainsaw models
with a combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
25
23
26
22
1824
2 3 32 33
128
20311174
6
5
16
17
19
30
29
9
12
24
31
10
8
21
27
13 14 15
31
31
1. Cylinder cover 2. Front handle
2964 - 001 - 10.12.2018
3. Chain brake and front hand guard
4. Starter housing
5. Chain oil tank
6. Starter rope handle
7. Adjuster screws carburetor
8. Choke control
9. Rear handle
10. Start/stop switch
11. Fuel tank
12. Muffler
13. Bar tip sprocket
14. Saw chain
15. Guide bar
16. Spiked bumper
17. Chain catcher
18. Clutch cover
19. Right hand guard
20. Throttle trigger
21. Throttle trigger lockout
22. Decompression valve
23. Combination wrench
24. Chain tensioning screw
25. Operator's manual
26. Transportation guard
27. Start throttle lock
28. Information and warning decal
29. Product and serial number plate
30. Brake band
31. Vibration damping system, 3 units
32. Spark plug
33. Spark plug cap
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
This product complies with applicable EC
Directives.
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 34
and on the
label.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Decompression valve.
Fuel.
Chain oil.
yyyywwxxxx The rating plate shows se-
rial number. is theyyyy
production year and isww
the production week.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
964 - 001 - 10.12.2018 3
Product specificaties
| Merk: | Husqvarna |
| Categorie: | Zaagmachine |
| Model: | 281 XP |
Heb je hulp nodig?
Als je hulp nodig hebt met Husqvarna 281 XP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Husqvarna
14 Mei 2025
9 Mei 2025
14 November 2024
6 Juni 2023
28 Mei 2023
24 Mei 2023
18 Mei 2023
17 Mei 2023
17 Mei 2023
17 Mei 2023
Handleiding Zaagmachine
- Narex
- Prime3
- Bosch
- Kraftronic
- Donau Elektronik
- Fein
- Maruyama
- ACG
- Homelite
- Bavaria
- Milwaukee
- Blucave
- MSW
- Budget
- Turbo-Silent
Nieuwste handleidingen voor Zaagmachine
15 Juni 2025
15 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
7 Juni 2025
5 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025