Hunter Carrington Isle 13164 Handleiding

Bekijk gratis de handleiding van Hunter Carrington Isle 13164 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Hunter Carrington Isle 13164 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACIÓN/ INSTRUCTIONS D’INSTALLATION

For Models:

Para los Modelos:

Pour les Modèles:

Here are the

tools you’ll

need to

complete your

installation:

Estas son las

herramientas

que usted

necesitará para

completar su

instalación:

Voici les outils

dont vous

aurez besoin

pour réaliser

l’installation:

Ladder

Escalera

Échelle

Pliers

Alicates

Pince

Wire Strippers

Pelacables

Pince à dénuder

READ AND SAVE THESE INSTRUCTIONS

These instructions are provided for your safety. It

is very important that they are read carefully and

completely before beginning installation of the

lighting xture.

LEA Y GUARDE ESTAS INSTRUCCIONES

Estas instrucciones se proporcionan para su

seguridad. Es muy importante leerlas detenid-

amente y completamente antes de comenzar la

instalación de la lámpara.

LISEZ ET CONSERVEZ CES INSTRUCTIONS

Ces instructions sont fournies pour votre sécurité.

Il est très important de les lire attentivement dans

leur intégralité avant d’entreprendre l’installation

du luminaire.

Fixture weight ±2 lbs:

Peso ±2 lb:

Poids xe ±2 lbs:

•

WARNING

• All wiring must be in accordance with national

and local electrical codes ANSI/NFPA 70. If you

are unfamiliar with wiring or in doubt, consult a

qualied electrician.

• To avoid possible electrical shock, before

installing your light xture, disconnect the power

by turning off the circuit breakers to the outlet box

associated with the wall switch location.

• The lighting xture must be grounded. If the

ground wire for the installation site is not present,

immediately STOP installation and consult a

qualied electrician.

• Todo el cableado debe realizarse de acuerdo con

los códigos eléctricos locales y nacionales ANSI/

NFPA 70. Si no está familiarizado con el cableado,

o si tiene duda, consulte a un electricista calicado.

• Para evitar una posible descarga eléctrica, antes

de instalar su lámpara, desconecte la energía

apagando los interruptores automáticos (breakers)

que alimentan la caja de salida asociada con la

ubicación del interruptor de pared.

•

ADVERTENCIA

• La lámpara se debe conectar a tierra. Si el alambre

de conexión a tierra no está presente en el sitio

de la instalación, DETENGA inmediatamente la

instalación y consulte con un electricista calicado.

•

AVERTISSEMENT

•

Tout le câblage doit être conforme aux codes

électriques nationaux et locaux en vigueur et à la

norme ANSI/NFPA70. Si vous n'avez pas l'habitude

de faire ce câblage ou en cas de doute, adressez-

vous à un électricien qualié.

• Pour éviter tout choc électrique, avant d’installer

le luminaire, coupez le courant en éteignant les

disjoncteurs de la boîte électrique associée à

l’interrupteur mural.

•

Le luminaire doit être mis à la terre. Si le l

de terre du lieu d’installation n’est pas présent,

ARRÊTER immédiatement l’installation et

consulter un électricien qualié.

Part #/Pieza #/Pièce #

Hardware Service Kit/Kit De Mantenimiento Del Equipo/Trousse De

Maintenance Quincaillerie

Finish/Finish/FiniModel/Modelo/Modèle

©2023 Hunter Fan Co.

Light Pendant

Luz Colgante

Lumière Chaînette

ENGLISH

Screwdriver

Destornilladore

Tournevis

M

N

L

G

A

B

C

D

E

F

H

K

I

J

O

13164

Carrington Isle

KG20901A57

Luxe Gold/Oro de Lujo/

Or Grand Luxe13164

ML422

r_040523

2.20 lbs(1.00 kg)

1

1

1

FINISHING THE INSTALLATION

CONNECTING THE WIRES

PREPARING FOR INSTALLATION

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light

and wipe down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

Carefully remove all contents from the carton. Shut off the power at the circuit breaker and completely remove the

old xture from the wall, including the old mounting bracket. Remove the new mounting bracket assembly from the

bag. Then remove cap nuts (G) from mounting screws (A). Place the mounting plate (B) over the junction box so that

mounting screws (A) and nuts (C) extend out away from the wall. Depending on the placement of your junction box the

position of mounting screws (A) may need to be adjusted to allow the canopy to be ush with the ceiling. Adjust the

position of mounting screws (A) so that mounting screws (A) can be exposed 5-6 mm after passing through the canopy

(F) to properly t the cap nuts. Mounting screws (A) can be adjusted by loosening nuts (C) and loosening or tightening

mounting screws (A). Once the ideal position of mounting screws (A) has been conrmed, tighten nuts (C) on mounting

screws (A) on the front of the mounting plate to ensure that mounting screws (A) are secure. Pull the house wires

through the center of mounting plate (B). Secure mounting plate (B) to the junction box by tightening the screws (D).

Slide cord (K) through cord grip (N) to adjust the wire to desirable

length [set screw (M) may need to be loosened rst]. Tighten the set

screw (M) with the included screwdriver (L) to lock it tight. Adjust the

placement of the strain relief (O) on the cord above the canopy. Cut

excess cord leaving at least 8 to 10 inches of wire in addition to the

desired length. Remove the outer jacket of each cord (K) to expose

individual wires (white, black, green). Strip half an inch of jacket away

from the ends of each individual wire. Have a helper support the

xture’s weight while completing the wiring. Attach the xture’s wires

to the power supply wires from the junction box. Connect black to

black (live); white to white (neutral); grounding to grounding (green

or copper). Twist the ends of the wire pairs together. Then twist on a wire connector. Make sure all twists are in the

same direction. Loop xture’s ground wire around grounding screw (E) and tighten. If there is no ground wire (green or

copper) from the junction box, contact a qualied electrician.

Raise canopy (F) to mounting plate (B) and position mounting screws (A) so that they protrude through the openings of

canopy (F). Secure canopy (F) in place with cap nuts (H). Secure Shade (I) onto the socket (H) by screwing socket ring (J)

tight. Install light bulb (not included) in accordance with the xture’s specications. Do not exceed the recommended

wattage. Turn on the power and test the xture. Your installation is now complete.

Product specificaties