HQ Power VDPC145 Handleiding

HQ Power Controller VDPC145

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ Power VDPC145 (47 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/47
VDPC145
192-CHANNEL DMX CONTROLLER
192-KANAALS DMX LICHTSTURING
RÉGIE DE LUMIÈRE DMX 192 CANAUX
CONTROLADOR DMX DE 192 CANALES
192-KANAL-DMX-STEUERGERÄT
192-CIO KANAŁOWY STEROWNIK DMX
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
INSTRUKCJA OBSŁUGI
VDPC145_v2 VELLEMAN 2
VDPC145 – 192-CHANNEL DMX CONTROLLER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the e bringing this device into service. VDPC145! Please read the manual carefully befor
This is a 192-channel DMX controller, capable of controlling 12 devices with up to 16 channels. The device features
30 banks of 8 scenes each, 6 chases for scene programming and a 4-digit LED display. Check carefully for damage
caused by transportation. Consult your dealer and don’t install this device if it has been damaged in transit.
2. Safety Instructions
• A qualified technician should install and service this device.
• Damage caused by disregarding certain vered by the warranty and the dealer guidelines in this manual is not co
will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off oom temperature. until it has reached r
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• Note that damage caused by user modifications to the device are not covered by the warranty. Keep the device
away from children and unauthorised users.
3. General Guidelines
• This device is a lighting controller for professional use on stage, in discos, theatres, etc. The VDPC145 should
only be used indoors with the included adapter working on an alternating current of max. 230VAC / 50Hz.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device will be protected against extreme heat, moisture and dust.
• Do not use or transport the device under temperatures < 5°C or > 35°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit operation by unqualified
people. Any damage that may occur will probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty. Only use the device
for its intended purpose. All other uses may cause short circuits, burns, electroshocks, lamp explosions, crashes,
etc. Using the device in an unauthorised way will void the warranty.
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
VDPC145_v2 VELLEMAN 3
4. Description
a) Front Panel
1. Scanner Buttons
SCANNERS CHANNEL
1 1-16
2 17-32
3 33-48
4 49-64
5 65-80
6 81-96
7 97-112
8 113-128
9 129-144
10 145-160
11 161-176
12 177-192
Press the button to activate the selected scanner (LED is lit). All appropriate channels are ready for use and can be
adjusted.
2. Scene Buttons (1 – 8)
Press a button to run or store a scene. The second digit of the LED display shows scenes 1-8.
3. Faders (1 – 8)
Use the faders to adjust the output level of a DMX channel from 0 to 255. The value will appear on the
LCD display.
4. Page Select
Press this button to switch between page A (the first 8 channels) and page B (the next 8 channels) of
a device.
5. Speed Slider
Adjust the chase speed with this slider (0.1 sec. – 10 min.)
6. Fade Time Slider
Adjust the fade time with this slider (0 – 30 sec.)
Fig. 1

Product specificaties

Merk: HQ Power
Categorie: Controller
Model: VDPC145

Heb je hulp nodig?

Als je hulp nodig hebt met HQ Power VDPC145 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Controller HQ Power

HQ Power

HQ Power VDPC145 Handleiding

3 Juli 2023
HQ Power

HQ Power HQDB10001 Handleiding

1 Juli 2023

Handleiding Controller

Nieuwste handleidingen voor Controller

HyperX

HyperX ChargePlay Clutch Charging Grips Handleiding

25 April 2024
Victrix

Victrix Pro FS-12 Handleiding

25 April 2024
Circle

Circle with Disney Handleiding

18 April 2024
Genesis

Genesis Mangan 200 Handleiding

16 April 2024
Genesis

Genesis Mangan 300 Handleiding

16 April 2024
Reely

Reely Sky-series-12A Handleiding

16 April 2024
Hori

Hori Tactical Assault Commander Handleiding

16 April 2024
BeamZ

BeamZ WTR10 Handleiding

15 April 2024
Datapath

Datapath VSN1182 Handleiding

8 April 2024
Datapath

Datapath VSN982 Handleiding

8 April 2024