House Of Marley Stir It Up EM-FH013 Handleiding

House Of Marley Hoofdtelefoon Stir It Up EM-FH013

Lees hieronder de 📖 handleiding in het Nederlandse voor House Of Marley Stir It Up EM-FH013 (173 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/173
STIR IT UP TURNTABLE
RECORD PLAYER INSTRUCTIONS
Welcome to the House of Marley.
We are honored you have selected the Stir It Up
Turntable to become part of your music experience.
The Stir It Up features design and material cues from
our Get Together BT speaker and retro-design details
of turntables from the Bob Marley era (1960-1980).
Simple forms with rich materials, fit and finishes.
Let the natural materials shine.
EN
BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive
dust, cold or moisture. Keep away from sources that hum, such as transformers
or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical
shock. If a foreign object should get into the set, contact Customer Service.
3. Be sure not to handle record with dirty ngers. Never play a record that has a
crack on the surface.
4. When removing the power plug from the wall outlet, always pull directly on the
plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover
after use.
6. Do not attempt to clean the unit with chemical solvents as this might damage the
nish. Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord
from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an
extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference.
ASSEMBLY
1. Take all the components from the package and then place the product on a
stable surface.
2. Surround the belt on the bottom of metal platter. Make sure the belt is not
installed twisted. Use your thumb to stretch the belt as the illustration below.
3. Reverse the platter and don’t forget to keep holding the belt. Then match the
spindle and insert the platter to the unit.
4. Surround the belt which is held with your thumb into the main (white) rotation
column of the triangular arrangement gear columns.
5. Place the turntable mat on the platter. Then the main assembly is accomplished.
NOTE: To disassemble the turntable, directly grasp the turntable and pull it upward
6. Remove the counterweight and place it in it’s proper location on the Tone arm
(refer to illustration)
7. Remove the 45rpm adapter and place it in it’s new home located in the top right
corner of the record player.
EN
POWERING YOUR STIR IT UP TURNTABLE
Your Stir It Up turntable uses an AC power supply and is powered by a standard
wall outlet.
1. Insert the AC power supply into Stir It Up.
2. Insert the wall plug into an appropriate wall outlet.
EASY TO USE
1. Connect the AC power supply to the household outlet.
2. Rotate the OFF / 33/45 knob to turn on the unit and Select the speed according
to the record you are playing.
3. Put a record on the turntable. Remember to use the 45 RPM adaptor located on
the top right corner when playing a 45 RPM record.
4. Lift and move the tone arm to turntable. Place the tone arm on the edge of the
record and the record starts playing.
5. Assemble the balance weight and set it to a proper position.
NOTE: The balance weight is to adjust the pressure of the needle. If the pressure is
too much, the sound will become distorted; if the pressure is too little, track skipping
will easily happen. Please adjust the balance weight by turning the balance weight
clockwise or counter-clockwise.
6. To pause or stop playing, you need to lift and move the tone arm back to the tone
arm rest manually.
7. When the end of the record is reached, the tone arm and rotation stop. Lift the
tone arm and place it to tone arm rest manually.
CONNECTIONS
CAUTION: Switch off the power to all equipment before making connections. Read
the instructions of each component you intend to use with this unit. Be sure to insert
each plug securely. To prevent hum and noise, avoid bundling the signal intercon-
nection cables together with the AC power cord.
LINE OUT OPERATION
1.Switch the PRE-AMP OFF/ON SWITCH to ON position.
2. Plug one end of the RCA cable (included) into the LINE OUT socket at the back
of the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the LINE IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on the amplier device.
EN


Product specificaties

Merk: House Of Marley
Categorie: Hoofdtelefoon
Model: Stir It Up EM-FH013

Heb je hulp nodig?

Als je hulp nodig hebt met House Of Marley Stir It Up EM-FH013 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon House Of Marley

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon