Hotpoint SA2 840 P IX Handleiding

Bekijk gratis de handleiding van Hotpoint SA2 840 P IX (4 pagina’s), behorend tot de categorie Oven. Deze gids werd als nuttig beoordeeld door 108 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over Hotpoint SA2 840 P IX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN

Quick guide

FIRST TIME USE

1. SETTING THE TIME

You will need to set the time when you switch on the appliance

for the rst time: Press icon and the two digits until the

for the hour start ashing on the display.

Use or to set the hour and press to conrm. The two

digits for the minutes will start ashing. Use o to set the

minutes and press to conrm.

Please note: When the icon is ashing, for example following

lengthy power outages, you will need to reset the time.

2. SET THE POWER CONSUMPTION

By default the oven is programmed to work at a power higher

than 3 kW (Hi): To operate the oven at a power that is compatible

with a domestic power supply less than 2,9 kW (Lo), you will

need to change the settings.

To go to the change menu, turn the selection knob to , then

turn it back to .

Press and hold and for ve seconds immediately

afterwards.

Use o to change the setting, then press and hold for at

least two seconds to conrm.

3. HEAT THE OVEN

A new oven may release odors that have been left behind

during manufacturing: this is completely normal. Before starting

to cook food, we therefore recommend heating the oven with it

empty in order to remove any possible odors.

Remove any protective cardboard or transparent lm from the

oven and remove any accessories from inside it.

Heat the oven to 250 °C for about one hour. The oven must be

empty during this time.

Please note: It is advisable to air the room after using the appliance

for the rst time.

FUNCTIONS & DAILY USE

CONVENTIONAL

For cooking any kind of dish on one shelf only.

FORCED AIR

For cooking dierent foods that require the same cooking

temperature on several shelves (maximum three) at the same

time. This function can be used to cook dierent foods without

odours being transferred from one food to another.

MAXI COOKING

For cooking large joints of meat (above 2.5 kg). We

recommend turning the meat over during cooking to ensure

that both sides brown evenly. We also recommend basting the

joint every so often to prevent it from drying out excessively.

PIZZA

For baking dierent types and sizes of pizza and bread. It

is a good idea to swap the position of the baking trays halfway

through cooking.

THANK YOU FOR BUYING A HOTPOINT

PRODUCT

In order to receive a more complete

assistance, please register your product on

www . hotpoint . eu/register

Before using the appliance carefully read the Safety

Instruction.

CONTROL PANEL DESCRIPTION

1324 56

1. SELECTION KNOB

For switching the oven on by selecting a

function.

Turn to theposition to switch the oven

o.

2. LIGHT

With the oven switched on, press to turn

the oven compartment lamp on or o.

3. SETTING THE TIME

For accessing the cooking time settings,

delayed start and timer.

For displaying the time when the oven is

o.

4. DISPLAY

5. ADJUSTMENT BUTTONS

For changing the cooking time settings

6. THERMOSTAT KNOB

Turn to select the temperature you

require when activating manual

functions.

For automatic functions keep on /A.

Product specificaties